SIST EN 1744-6:2007
(Main)Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement
Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement
This European Standard specifies the procedure for the determination of the influence of water-soluble components from recycled aggregates on the initial setting time of cement.
NOTE A procedure is described in EN 1744-1:1998, clause 15.3, for use with natural aggregates; this procedure is intended to demonstrate and quantify the effects of organic contaminators. It is not suitable for recycled aggregates because these may also contain inorganic contaminators.
Prüfverfahren für chemische Eigenschaften von Gesteinskörnungen - Teil 6: Bestimmung des Einflusses von Auszügen rezyklierter Gesteinskörnung auf den Erstarrungsbeginn von Zement
Diese Europäische Norm legt ein Verfahren zur Bestimmung des Einflusses wasserlöslicher Bestandteile aus
rezyklierten Gesteinskörnungen auf den Erstarrungsbeginn des Zements fest.
ANMERKUNG Ein Verfahren für natürliche Gesteinskörnungen wird in EN 1744-1:1998, 15.3, beschrieben. Dieses
Verfahren dient dazu, die Wirkungen organischer Verunreinigungen darzustellen und zu quantifizieren. Für rezyklierte
Gesteinskörnungen ist dieses Verfahren ungeeignet, da auch anorganische Verunreinigungen vorhanden sein können.
Essais relatifs aux propriétés chimiques des granulats - Partie 6: Détermination de l'influence d'un extrait de granulat recyclé sur le temps de prise initial du ciment
La présente Norme Européenne spécifie un mode opératoire qui permet de déterminer l’influence des constituants solubles dans l’eau contenus dans les granulats recyclés, sur le temps de prise initial du ciment.
NOTE Un mode opératoire destiné a etre utilisé avec les granulats naturels est décrit dans l’EN 1744-1:1998, paragraphe 15.3 ; il vise a démontrer et a quantifier les effets des polluants organiques. Il ne convient pas aux granulats recyclés car il se peut que ceux-ci contiennent également des polluants inorganiques.
Preskusi kemičnih lastnosti agregatov - 6. del: Ugotavljanje vpliva izlužka recikliranega agregata na začetni čas vezanja cementa
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Prüfverfahren für chemische Eigenschaften von Gesteinskörnungen - Teil 6: Bestimmung des Einflusses von Auszügen rezyklierter Gesteinskörnung auf den Erstarrungsbeginn von ZementEssais relatifs aux propriétés chimiques des granulats - Partie 6: Détermination de l'influence d'un extrait de granulat recyclé sur le temps de prise initial du cimentTests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement91.100.15Mineralni materiali in izdelkiMineral materials and products13.030.50RecikliranjeRecyclingICS:Ta slovenski standard je istoveten z:EN 1744-6:2006SIST EN 1744-6:2007en01-marec-2007SIST EN 1744-6:2007SLOVENSKI
STANDARD
SIST EN 1744-6:2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1744-6October 2006ICS 91.100.15 English VersionTests for chemical properties of aggregates - Part 6:Determination of the influence of recycled aggregate extract onthe initial setting time of cementEssais pour déterminer les propriétés chimiques desgranulats - Partie 6: Détermination de l'influence d'un extraitde granulat recyclé sur le temps de prise initial du cimentPrüfverfahren für chemische Eigenschaften vonGesteinskörnungen - Teil 6: Bestimmung des Einflussesvon Auszügen rezyklierter Gesteinskörnung auf denErstarrungsbeginn von ZementThis European Standard was approved by CEN on 28 August 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1744-6:2006: ESIST EN 1744-6:2007
EN 1744-6:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Definitions.4 4 Reagents.4 5 Apparatus.4 6 Principle.5 7 Sampling.5 8 Preparation of test portion.5 9 Procedure.5 9.1 General.5 9.2 Production of the aggregate extract.5 9.3 Determination of the standard consistence.5 9.4 Determination of the initial setting time.6 10 Calculation and expression of results.6 11 Test report.6
SIST EN 1744-6:2007
EN 1744-6:2006 (E) 3 Foreword This document (EN 1744-6:2006) has been prepared by Technical Committee CEN/TC 154, "Aggregates", the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2007, and conflicting national standards shall be withdrawn at the latest by April 2007. This standard forms part of a series of tests for chemical properties of aggregates. Test methods or other properties of aggregates will be covered by Parts of the following European Standards:
EN 932
Tests for general properties of aggregates EN 933
Tests for geometrical properties of aggregates
EN 1097 Tes
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.