kSIST FprEN 755-2:2024

Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties

This European Standard specifies the mechanical property limits resulting from tensile testing applicable to aluminium and aluminium alloy extruded rod/bar, tube and profile.
Technical conditions for inspection and delivery, including product and testing requirements, are specified in EN 755 1. Temper designations are defined in EN 515. The chemical composition limits for these materials are given in EN 573 3.

Aluminium und Aluminiumlegierungen - Stranggepresste Stangen, Rohre und Profile - Teil 2: Mechanische Eigenschaften

Dieses Dokument legt die Grenzwerte für die mechanischen Eigenschaften von stranggepressten Stangen, Rohren und Profilen aus Aluminium und Aluminiumlegierungen fest.
Die Technischen Lieferbedingungen, einschließlich Erzeugnis- und Prüfanforderungen, sind in EN 755-1 festgelegt. Die Bezeichnungen der Werkstoffzustände sind in EN 515 definiert. In der EN 573-3 sind die Grenzen der chemischen Zusammensetzung für diese Werkstoffe angegeben.

Aluminium et alliages d'aluminium - Barres, tubes et profilés filés - Partie 2 : Caractéristiques mécaniques

Le présent document spécifie les limites des caractéristiques mécaniques provenant de l’essai de traction applicables aux barres, tubes et profilés filés en aluminium et alliages d’aluminium.
Les conditions techniques de contrôle et de livraison, y compris les exigences relatives aux produits et aux essais, sont spécifiées dans l’EN 755-1. La désignation des états métallurgiques est définie dans l’EN 515. Les limites de composition chimique de ces matériaux sont données dans l’EN 573-3.

Aluminij in aluminijeve zlitine - Iztiskane palice/drogovi, cevi in profili - 2. del: Mehanske lastnosti

General Information

• Status: Not Published
• Public Enquiry End Date: 14-Aug-2023
• ICS: 77.150.10 - Aluminium products
• Technical Committee: INEK - Nonferrous metals
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 25-Mar-2024
• Due Date: 13-May-2024
• Completion Date: 26-Mar-2024
• Ref Project: FprEN 755-2 - Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties

Relations

• Revises: SIST EN 755-2:2016 - Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 755-2:2023
01-julij-2023
Aluminij in aluminijeve zlitine - Iztiskane palice/drogovi, cevi in profili - 2. del:
Mehanske lastnosti
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2:
Mechanical properties
Aluminium und Aluminiumlegierungen - Stranggepresste Stangen, Rohre und Profile -
Teil 2: Mechanische Eigenschaften
Aluminium et alliages d'aluminium - Barres, tubes et profilés filés - Partie 2 :
Caractéristiques mécaniques
Ta slovenski standard je istoveten z: prEN 755-2
ICS:
77.150.10 Aluminijski izdelki Aluminium products
oSIST prEN 755-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 755-2:2023

---------------------- Page: 2 ----------------------
oSIST prEN 755-2:2023


DRAFT
EUROPEAN STANDARD
prEN 755-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

June 2023
ICS 77.150.10 Will supersede EN 755-2:2016
English Version

Aluminium and aluminium alloys - Extruded rod/bar, tube
and profiles - Part 2: Mechanical properties
Aluminium et alliages d'aluminium - Barres, tubes et Aluminium und Aluminiumlegierungen -
profilés filés - Partie 2 : Caractéristiques mécaniques Stranggepresste Stangen, Rohre und Profile - Teil 2:
Mechanische Eigenschaften
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 132.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 755-2:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 755-2:2023
EN 755-2:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Mechanical property limits . 4
4.1 General . 4
4.2 Elongation . 4
4.3 Tables of mechanical properties . 5
Annex A (informative) List of tempers used in Tables 1 to 64 (extract of EN 515) . 67
Bibliography . 69

2

---------------------- Page: 4 ----------------------
oSIST prEN 755-2:2023
...