SIST EN 14420-2:2013
(Main)Hose fittings with clamp units - Part 2: Hose side parts of hose tail
Hose fittings with clamp units - Part 2: Hose side parts of hose tail
This European Standard specifies requirements for the hose tail of hose fittings according to EN 14420-1 for use with clamp units according to EN 14420-3. Furthermore, it specifies materials for hose fittings with clamp units according to EN 14420-4 to EN 14420-8. Maximum working pressure is 25 bar1); maximum working temperature is 65 °C.
Schlaucharmaturen mit Klemmfassungen - Teil 2: Schlauchseitige Stutzenteile
Diese Europäische Norm legt Anforderungen für den schlauchseitigen Stutzenteil von Schlaucharmaturen nach EN 14420-1, mit Klemmfassungen nach EN 14420-3 fest.
Höchst zulässiger Arbeitsdruck 25 bar, höchst zulässige Arbeitstemperatur 65 °C.
Raccords pour flexibles avec demi-coquille - Partie 2: Douilles pour flexibles
Le présent document prescrit les exigences applicables aux douilles pour flexibles conformément à l’EN 14420 1 destinées à être utilisées avec des demi-coquilles conformément à l’EN 14420 3.
La pression de service maximale est de 25 bar et la température de service maximale est de 65 °C.
Cevni fitingi z objemkami - 2. del: Stranski cevni nastavki
Ta evropski standard določa zahteve za cevne nastavke cevnih fitingov v skladu z EN 14420-1 za uporabo z objemkami iz EN 14420-3. Poleg tega določa materiale za cevne fitinge z objemkami v skladu z EN 14420-4 do EN 14420-8. Največji delovni tlak je 25 barov1); najvišja delovna temperatura je 65 °C.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cevni fitingi z objemkami - 2. del: Stranski cevni nastavkiSchlaucharmaturen mit Klemmfassungen - Teil 2: Schlauchseitige StutzenteileRaccords pour flexibles avec demi-coquille - Partie 2: Douilles pour flexiblesHose fittings with clamp units - Part 2: Hose side parts of hose tail23.040.60Prirobnice, oglavki in spojni elementiFlanges, couplings and jointsICS:Ta slovenski standard je istoveten z:EN 14420-2:2013SIST EN 14420-2:2013en,fr,de01-september-2013SIST EN 14420-2:2013SLOVENSKI
STANDARDSIST EN 14420-2:20051DGRPHãþD
SIST EN 14420-2:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14420-2
July 2013 ICS 23.040.70 Supersedes EN 14420-2:2004English Version
Hose fittings with clamp units - Part 2: Hose side parts of hose tail
Raccords pour flexibles avec demi-coquille - Partie 2: Douilles pour flexibles
Schlaucharmaturen mit Klemmfassungen - Teil 2: Schlauchseitige Stutzenteile This European Standard was approved by CEN on 15 May 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14420-2:2013: ESIST EN 14420-2:2013
EN 14420-2:2013 (E) 2 Contents Page Foreword .3 1 Scope .5 2 Normative references .5 3 Terms and definitions .6 4 Dimensions .6 5 Materials .9 6 Marking . 10 7 Type testing and quality control . 10 Bibliography . 11
SIST EN 14420-2:2013
EN 14420-2:2013 (E) 3 Foreword This document (EN 14420-2:2013) has been prepared by Technical Committee CEN/TC 218 “Rubber and plastics hoses and hose assemblies”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2014, and conflicting national standards shall be withdrawn at the latest by January 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14420-2:2004. In comparison to EN 14420-2:2004, the following changes have been made: In Clause 2 the normative references have been updated. A new Clause 3 "Terms and definitions" has been added. Subclause 3.2 "Surface finish" has been deleted. In Clause 5, the list of materials appropriate for use in hose fittings has been supplemented by aluminium and hastelloy. Clause 7 on type testing and quality control has been added. The Bibliography has been reviewed. The standard has been revised editorially. EN 14420, Hose fittings with clamp units consists of the following parts: Part 1: Requirements, types of fixing and connection, designation and testing Part 2: Hose side parts of hose tail Part 3: Clamp units, bolted or pinned Part 4: Flange connections Part 5: Threaded connections Part 6: TW tank truck couplings Part 7: Cam locking couplings Part 8: Symmetrical half coupling (Guillemin system) According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, SIST EN 14420-2:2013
EN 14420-2:2013 (E) 4 Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 14420-2:2013
EN 14420-2:2013 (E) 5 1 Scope This European Standard specifies requirements for the hose tail of hose fittings according to EN 14420-1 for use with clamp units according to EN 14420-3. Furthermore, it specifies materials for hose fittings with clamp units according to EN 14420-4 to EN 14420-8. Maximum working pressure is 25 bar1); maximum working temperature is 65 °C. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) app
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.