iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN IEC 62680-1-2:2024

(Main)

Universal serial bus interfaces for data and power - Part 1-2: Common components - USB power delivery specification

Universal serial bus interfaces for data and power - Part 1-2: Common components - USB power delivery specification

Interfaces de bus universel en série pour les données et l'alimentation électrique - Partie 1-2: Composants communs - Spécification de l'alimentation électrique par port USB

Vmesniki univerzalnega serijskega vodila za prenos podatkov in napajanje - 1-2. del: Skupne komponente - Specifikacija za zagotavljanje napajanja prek USB

General Information

Status
Not Published
Public Enquiry End Date
30-Jul-2024
ICS
29.220 - Galvanic cells and batteries
33.120 - Components and accessories for telecommunications equipment
35.200 - Interface and interconnection equipment
Technical Committee
AVM - Audio, video and multimedia systems and equipment
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
14-May-2024
Due Date
01-Oct-2024
Ref Project
prEN IEC 62680-1-2:2024 - Universal serial bus interfaces for data and power - Part 1-2: Common components - USB power delivery specification

Relations

Revises
SIST EN IEC 62680-1-2:2023 - Universal serial bus interfaces for data and power - Part 1-2: Common components - USB Power Delivery specification (IEC 62680-1-2:2022)
Effective Date
20-Feb-2024

Buy Standard

prEN IEC 62680-1-2:2024 - BARVEprEN IEC 62680-1-2:2024 - BARVE
PreviousNext
Draft
prEN IEC 62680-1-2:2024 - BARVE
English language
1115 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 62680-1-2:2024
01-julij-2024
Vmesniki univerzalnega serijskega vodila za prenos podatkov in napajanje - 1-2.
del: Skupne komponente - Specifikacija za zagotavljanje napajanja prek USB
Universal serial bus interfaces for data and power - Part 1-2: Common components -
USB power delivery specification
Interfaces de bus universel en série pour les données et l'alimentation électrique - Partie
1-2: Composants communs - Spécification de l'alimentation électrique par port USB
Ta slovenski standard je istoveten z: prEN IEC 62680-1-2:2024
ICS:
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
oSIST prEN IEC 62680-1-2:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 62680-1-2:2024

---------------------- Page: 2 ----------------------
oSIST prEN IEC 62680-1-2:2024
100/4138/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62680-1-2 ED7
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-05-10 2024-08-02
SUPERSEDES DOCUMENTS:
100/4106/RR

IEC TA 18 : MULTIMEDIA HOME SYSTEMS AND APPLICATIONS FOR END-USER NETWORKS
SECRETARIAT: SECRETARY:
Japan Mr Keisuke Koide
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if any, in this
CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clauses to
be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC clauses.
(SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Universal serial bus interfaces for data and power - Part 1-2: Common components - USB Power Delivery
specification

Copyright © 2024 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 62680-1-2:2024
PROPOSED STABILITY DATE: 2030

NOTE FROM TC/SC OFFICERS:


Page 2 USB Power Delivery Speci�ication Revision 3.2, Version 1.0, 2023-10

---------------------- Page: 4 ----------------------
oSIST prEN IEC 62680-1-2:2024
Universal Serial Bus
Power Delivery Specification




3.2
Revision:
1.0
Version:
2023-10
Release date:

---------------------- Page: 5 ----------------------
oSIST prEN IEC 62680-1-2:2024
LIMITED COPYRIGHT LICENSE
INTELLECTUAL PROPERTY DISCLAIMER
THIS SPECIFICATION IS PROVIDED TO YOU “AS IS” WITH NO WARRANTIES WHATSOEVER,
INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY
PARTICULAR PURPOSE. THE AUTHORS OF THIS SPECIFICATION DISCLAIM ALL LIABILITY,
INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PROPRIETARY RIGHTS, RELATING TO USE OR
IMPLEMENTATION OF INFORMATION IN THIS SPECIFICATION. THE PROVISION OF THIS
SPECIFICATION TO YOU DOES NOT PROVIDE YOU WITH ANY LICENSE, EXPRESS OR IMPLIED, BY
ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS.
Please send comments via electronic mail to techsup@usb.org.
For industry information, refer to the USB Implementers Forum web page at http://www.usb.org.
® ®
USB Type-C and USB4 are trademarks of the Universal Serial Bus Implementers Forum (USB-IF). Thunderbolt™ is
a trademark of Intel Corporation.
You may only use the Thunderbolt™ trademark or logo in conjunction with products designed to this specification
that complete proper certification and executing a Thunderbolt™ trademark license – see http://usb.org/compliance
for further information.
All product names are trademarks, registered trademarks, or service marks of their respective owners.
Copyright © 2010-2023, USB 3.0 Promoter Group: Apple Inc., Hewlett-Packard Inc., Intel Corporation, Microsoft
Corporation, Renesas, STMicroelectronics, and Texas Instruments.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 62680-1-2:2023(Main)
Universal serial bus interfaces for data and power - Part 1-2: Common components - USB Power Delivery specification (IEC 62680-1-2:2022)
EN IEC 62680-1-2:2022

IEC 62680-1-2:2022 specification defines a power delivery system covering all elements of a USB system including: Hosts, Devices, Hubs, Chargers and cable assemblies. This specification describes the architecture, protocols, power supply behavior, connectors and cabling necessary for managing power delivery over USB at up to 100W. This specification is intended to be fully compatible and extend the existing USB infrastructure. It is intended that this specification will allow system OEMs, power supply and peripheral developers adequate flexibility for product versatility and market differentiation without losing backwards compatibility. This sixt edition cancels and replaces the fifth edition published in 2021 and constitutes a technical revision. Extended Power Range (EPR) including Adjustable Voltage Supply (AVS) has been added. This docuemnt is the USB-IF publication Universal Serial Bus Power Delivery Specification Revision 3.1, Version 1.1.

  • Standard
    710 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    745 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62680-1-2:2023(Main)
Universal serial bus interfaces for data and power - Part 1-2: Common components - USB Power Delivery specification (IEC 62680-1-2:2022)
EN IEC 62680-1-2:2022

IEC 62680-1-2:2022 specification defines a power delivery system covering all elements of a USB system including: Hosts, Devices, Hubs, Chargers and cable assemblies. This specification describes the architecture, protocols, power supply behavior, connectors and cabling necessary for managing power delivery over USB at up to 100W. This specification is intended to be fully compatible and extend the existing USB infrastructure. It is intended that this specification will allow system OEMs, power supply and peripheral developers adequate flexibility for product versatility and market differentiation without losing backwards compatibility. This sixt edition cancels and replaces the fifth edition published in 2021 and constitutes a technical revision. Extended Power Range (EPR) including Adjustable Voltage Supply (AVS) has been added. This docuemnt is the USB-IF publication Universal Serial Bus Power Delivery Specification Revision 3.1, Version 1.1.

  • Standard
    710 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    745 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6185-3:2024(Main)
Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2024)
EN ISO 6185-3:2024

This document specifies the minimum safety characteristics required for the design, materials, manufacture and testing of inflatable boats and rigid inflatable boats with a length of the hull LH in accordance with ISO 8666 less than 8 m with a motor power rating of 15 kW and greater.
This document is applicable to the following types of boats intended for use within the operating temperatures of –20 °C to +60 °C:
—     Type VII: Powered boats, fitted with a buoyancy tube on the port and starboard sides, suitable for navigation in conditions of design categories C and D.
—     Type VIII: Powered boats, fitted with a buoyancy tube on the port and starboard sides, suitable for navigation in conditions of design category B.
This document excludes single-chambered boats and boats with tubes made from unsupported materials, and does not apply to aquatic toys and inflatable liferafts.
Boats with tubes made from aluminium, roto-moulded polyethylene, fibre reinforced plastic or other rigid materials are excluded from this document.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17821:2023/AC:2024(Corrigendum)
Building valves - Frost resistant taps for outdoor use (FRT) - General technical specification
EN 17821:2023/AC:2024

This document specifies:
- general construction, performance and material requirements for Frost Resistant Taps for outdoor use (FRT), PN 10.
- the application in the potable water installation with a static pressure of maximum 1,0 MPa (10 bar) and a distribution temperature of maximum 25 °C (PWC).
FRT valves shall consist of the 3 areas shown in Figure 1.
The conditions of use are according to the following Table 1.
The requirements with regard to the potable water quality are specified in national regulations.

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21068-1:2024(Main)
Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon - Part 1: General information, terminology and sample preparation (ISO 21068-1:2024)
EN ISO 21068-1:2024

This part of ISO 21068 gives definitions and specifies techniques for the preparation of samples for the chemical analysis of silicon-carbide-containing raw materials and refractory products including:
a)   SiC raw materials;
b)   graphite brick containing silicon carbide;
c)   silicon carbide brick (includes the bricks containing silicon nitride, silicon oxynitride, sialon);
d)   refractories containing carbon and/or silicon carbide mixed with clay;
e)   refractories containing carbon and/or silicon carbide mixed with silica (and fused silica);
f)   refractories containing carbon and/or silicon carbide mixed with high alumina material;
g)   refractories containing carbon and/or silicon carbide mixed with magnesia (and dolomite);
h)   refractories containing carbon and/or silicon carbide mixed with chrome mineral or magnesia-chrome materials;
i)   refractories containing carbon and/or silicon carbide except those described in a) to g) above.
The items of chemical analysis described in ISO 21068, Parts 1 to 4 are as follows:
1)   loss on drying (LOD);
2)   loss on ignition (LOI);
3)   total carbon, Ctotal;
4)   free carbon, Cfree;
5)   silicon carbide, SiC;
6)   free silicon (Sifree);
7)   free aluminium (Alfree);
8)   free magnesium (Mgfree);
9)   free iron (Fefree);
10)   silicon(IV) dioxide (SiO2);
11)   aluminium oxide (Al2O3);
12)   iron(III) oxide (total iron oxide calculated as Fe2O3);
13)   titanium(IV) oxide (TiO2);
14)   calcium oxide (CaO);
15)   magnesium oxide (MgO);
16)   sodium oxide (Na2O);
17)   potassium oxide (K2O);
18)   chromium(III) oxide (Cr2O3);
19)   zirconium oxide (ZrO2);
20)   boron oxide (total boron calculated as B2O3);
21)   nitrogen;
22)   oxygen;
23)   nitrides (undifferentiated: Si3N4, AlN, BN, sialon, oxy-nitrides, etc.);
24)   XRD-methods.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12625-16:2024(Main)
Tissue paper and tissue products - Part 16: Determination of optical properties - Diffuse reflectance method for opacity (paper backing) (ISO 12625-16:2024)
EN ISO 12625-16:2024

ISO 12625-16:2015 specifies the testing procedures for the instrumental determination of the opacity of tissue paper or tissue products by diffuse reflectance using a paper backing.
ISO 12625-16:2015 contains specific instructions for the preparation of test pieces of single-ply and multi-ply products, where special preparation/procedures might be necessary.
It can be used to determine the opacity of tissue paper and tissue products containing fluorescent whitening agents, provided the UV content of the radiation incident on the test piece has been adjusted to conform to that in the CIE illuminant C using a fluorescent reference standard provided by an authorized laboratory as described in ISO 2470-1.
ISO 12625-16:2015 is not applicable to coloured tissue paper and tissue products which incorporate fluorescent dyes or pigments.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17471:2024(Main)
Cranes - Loader cranes - Interface between loader cranes and work platforms
CEN/TS 17471:2024

This document specifies technical requirements for the interface of the basic machinery within the scope of EN 12999 equipped to allow the use of an assigned type of work platform as interchangeable equipment where the combination of the basic machinery and the work platform as interchangeable equipment is within the scope of EN 280 1.
The basic machinery covered by this document is designed to be installed on a road vehicle with load carrying capability. The combination of the basic machinery and the work platform as interchangeable equipment covered by this document belongs to Group B Type 1 class as in the scope of EN 280 1.
The basic machinery covered by this document allows two modes of operation:
-   the 'CRANE' mode of operation, for the use of the basic machinery as a loader crane within the scope of EN 12999;
-   the 'MEWP' mode of operation, for the use of the work platform with the basic machinery as within the scope of EN 280 1.
This document covers hazards related to switching between 'CRANE' and 'MEWP' mode as described above and covers the specific hazards related with the combination and the assembly of the work platform as interchangeable equipment with the basic machinery (see Annex A).
This document does not address hazards which may occur:
a)   when using work platform not assembled with the lifting machinery but simply lifted by the machinery (e.g. suspended from the hook of the crane);
b)   when using attachments not intended for the lifting of persons.

  • Technical specification
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 28139:2021/A1:2024(Amendment)
Equipment for crop protection - Knapsack combustion engine-driven airblast sprayers - Safety and environmental requirements and test methods - Amendment 1 (ISO 28139:2019/Amd 1:2024)
EN ISO 28139:2021/A1:2024
  • Amendment
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1570-1:2024(Main)
Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings
EN 1570-1:2024

1.1   This document specifies the safety requirements for lifting tables with the following properties:
-   serving no more than 2 fixed landings but are able to pass a fixed landing and,
-   having a vertical travel speed of no more than 0,15 m/s, unless safe by position and,
-   for raising or lowering goods (with or without operator(s) and/or authorised person(s)), or;
-   for raising or lowering operator(s) and/or authorised person(s) with or without goods, to positions where they can carry out work from a fixed or movable lifting table that is guided throughout its vertical travel only.
1.2   This document deals with all significant hazards pertinent, with the exception of noise, to lifting tables when used as intended and under the conditions foreseen by the manufacturer (see List of Hazards, Annex B). This document specifies the appropriate technical measures for eliminating and reducing the risks arising from the significant hazards.
1.3   This document does not apply to the following equipment:
-   lifting tables with a vertical travel speed exceeding 0,15 m/s, unless safe by position;
-   lifting tables, serving more than 2 fixed landings of a construction, for lifting goods, with a vertical travel speed not exceeding 0,15 m/s (EN 1570-2);
-   lifting tables, serving more than 2 fixed landings of a construction, for lifting operators, with a vertical travel speed not exceeding 0,15 m/s;
-   lifting tables carrying operators and installed in full enclosures with a vertical travel speed not exceeding 0,15 m/s;
-   lifting tables used on ships;
-   lifting tables designed for artists and stage set features during artistic performances;
-   power operated lifting platforms for persons with impaired mobility (EN 81-41);
-   mobile lifting tables for airport ground support equipment (EN 1915-2 and EN 12312-1);
-   lifting tables which are designed as part of a lift according to Directive (95/16/EC);
-   mobile elevating work platforms (EN 280);
-   static Group B elevating work platforms (EN 280);
-   vehicle servicing lifts (EN 1493);
-   mobile lifting tables used for firefighting (EN 1777);
-   mobile lifting tables with a horizontal travelling speed of more than 1,6 m/s;
-   rail dependent storage and retrieval equipment (EN 528);
-   scissor lift pallet trucks (EN ISO 3691-5);
-   lifting tables suspended from a ceiling.
1.4   This document does not consider the additional requirements for:
-   electromagnetic compatibility;
-   operation in severe conditions (e.g. extreme climates, freezer applications, strong magnetic fields);
-   operation subject to special rules (e.g. potentially explosive atmospheres, mines);
-   handling of loads, the nature of which could lead to dangerous situations (e.g. molten metal, acids, radiating materials, particularly brittle loads, loose loads (gravel, tubes));
-   hazards occurring during construction, transportation and disposal;
-   equipment installed on the load platform or the replacing or maintaining of it;
-   integration into broader systems or other machines, etc.;
-   cable-less controls;
-   lifting tables where the hydraulic pressure is derived directly from gas pressure;
-   lifting tables powered by internal combustion engines.

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    87 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1755:2024(Main)
Industrial trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres
EN 1755:2024

This document is applicable to self-propelled and pedestrian propelled manual and semi-manual industrial trucks as defined in ISO 5053-1:2020 including their load handling devices and attachments (hereafter referred to as trucks) intended for use in potentially explosive atmospheres.
NOTE 1   Attachments mounted on the load carrier or on fork arms which are removable by the user are not considered to be a part of the truck.
This document specifies supplementary technical requirements for the prevention of the ignition of an explosive atmosphere of flammable gases, vapours, mists or dusts by industrial trucks of equipment group II and equipment category 2G, 3G, 2D or 3D.
NOTE 2   The relationship between an equipment category (hereafter referred to as category) and the corresponding zone (area classification) is shown in informative Annex B.
This document does not apply to:
-   trucks of equipment group I;
-   trucks of equipment group II, equipment category 1;
-   trucks intended for use in potentially explosive atmospheres with hybrid mixtures;
-   protective systems.
This document does not apply to trucks intended for use in potentially explosive atmospheres of carbon disulfide (CS2), carbon monoxide (CO) and/or ethylene oxide (C2H4O) due to the special properties of these gases.
Technical requirements relating to lithium-ion batteries and fuel cells as energy sources are not given in this document due to their specific hazards.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day