SIST EN ISO 10256-3:2025
(Main)Protective equipment for use in ice hockey - Part 3: Face and eye protectors for skaters (ISO 10256-3:2024)
Protective equipment for use in ice hockey - Part 3: Face and eye protectors for skaters (ISO 10256-3:2024)
This document specifies performance requirements and test methods for eye and face protectors for use in ice hockey only.
This document is applicable to eye and face protectors worn by ice hockey players other than goalkeepers and by referees.
Schutzausrüstung zum Gebrauch beim Eishockey - Teil 3: Gesichtsschützer für Eisläufer (ISO 10256-3:2024)
ISO 10256-3:202x legt Leistungsanforderungen und Prüfverfahren für Gesichts- und Augenschützer (Visiere) zum Gebrauch beim Eishockey fest. Sie ist vorgesehen, in Verbindung mit ISO 10256-1:202x und ISO 10256-2:202x verwendet zu werden.
Anforderungen und entsprechende Prüfverfahren, wo anwendbar, sind für folgende Punkte festgelegt:
a) Werkstoffe und Konstruktion;
b) Konstruktion;
c) geschützter Bereich (Bedeckung);
d) Durchdringungswiderstand (Prüfklinge);
e) Puckaufprallwiderstand;
f) optische Qualität;
g) Prüfbericht;
h) Kennzeichnungen; und
i) Benutzerinformation.
Dieser Teil der ISO 10256 gilt für Gesichts- und Augenschützer, die von
- Eishockeyspielern (ausgenommen Torwarten, außer in den Fällen, in denen ISO 10256-4:202x auf diese Norm verweist), und
- Schiedsrichtern getragen werden.
Équipements de protection destinés à être utilisés en hockey sur glace - Partie 3: Protections faciales et oculaires pour les patineurs (ISO 10256-3:2024)
Le présent document spécifie les exigences de performance et les méthodes d'essai applicables aux protections faciales et oculaires destinées à être utilisées exclusivement en hockey sur glace.
Le présent document s'applique aux protections faciales et oculaires portées par les joueurs de hockey sur glace autres que les gardiens de but, et par les arbitres.
Varovalna oprema za uporabo pri hokeju na ledu - 3. del: Ščitniki za obraz in oči za drsalce (ISO 10256-3:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2025
Nadomešča:
SIST EN ISO 10256-3:2018
Varovalna oprema za uporabo pri hokeju na ledu - 3. del: Ščitniki za obraz in oči za
drsalce (ISO 10256-3:2024)
Protective equipment for use in ice hockey - Part 3: Face and eye protectors for skaters
(ISO 10256-3:2024)
Schutzausrüstung zum Gebrauch beim Eishockey - Teil 3: Gesichtsschützer für Eisläufer
(ISO 10256-3:2024)
Équipements de protection destinés à être utilisés en hockey sur glace - Partie 3:
Protections faciales et oculaires pour les patineurs (ISO 10256-3:2024)
Ta slovenski standard je istoveten z: EN ISO 10256-3:2024
ICS:
13.340.20 Varovalna oprema za glavo Head protective equipment
97.220.20 Oprema za zimske športe Winter sports equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 10256-3
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2024
EUROPÄISCHE NORM
ICS 13.340.20; 97.220.20 Supersedes EN ISO 10256-3:2018
English Version
Protective equipment for use in ice hockey - Part 3: Face
and eye protectors for skaters (ISO 10256-3:2024)
Équipements de protection destinés à être utilisés en Schutzausrüstung zum Gebrauch beim Eishockey - Teil
hockey sur glace - Partie 3: Protections faciales et 3: Gesichtsschützer für Eisläufer (ISO 10256-3:2024)
oculaires pour les patineurs (ISO 10256-3:2024)
This European Standard was approved by CEN on 14 July 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10256-3:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Annex II of Regulation (EU) 2016/425 of the European Parliament
and of the Council of 9 March 2016 on personal protective equipment aimed to be
covered. 4
European foreword
This document (EN ISO 10256-3:2024) has been prepared by Technical Committee ISO/TC 83 "Sports
and other recreational facilities and equipment" in collaboration with Technical Committee CEN/TC
158 “Head protection” the secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2025, and conflicting national standards shall be
withdrawn at the latest by June 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10256-3:2018.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
For the relationship with EU Legislation, see informative Annex ZA, which is an integral part of this
document.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 10256-3:2024 has been approved by CEN as EN ISO 10256-3:2024 without any
modification.
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Annex II of Regulation (EU) 2016/425 of the European
Parliament and of the Council of 9 March 2016 on personal protective
equipment aimed to be covered
This European Standard has been prepared under a Commission’s standardization request
“M/571/C(2020) 7924 final” to provide one voluntary means of conforming to essential requirements
of Annex II of Regulation (EU) 2016/425.
Once this standard is cited in the Official Journal of the European Union under that Regulation (EU)
2016/425, compliance with the normative clauses of this standard given in Table ZA.1 confers, within
the limits of the scope of this standard, a presumption of conformity with the corresponding essential
requirements of Annex II of Regulation (EU) 2016/425, and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Annex II of Regulation (EU)
2016/425
Essential Requirements of Clause(s)/subclause(
Remarks/Notes
Regulation (EU) 2016/425 s) of this EN
1.1.1. Ergonomics 4.2
1.1.2.1. Optimum level of protection 4.2
1.2.1. Absence of inherent risks and other nuisance
4.2, 4.3.1
factors
1.2.1.1. Suitable constituent materials 4.3.1
1.2.1.2. Satisfactory surface condition of all PPE parts in
4.3.2.1
contact with the user
1.2.1.3. Maximum permissible user impediment 4.3.2.2.2
1.3.1. Adaptation of PPE to user morphology 4.2
1.4. Manufacturer's instructions and information 7, 8
Not covered in
2.1. PPE incorporating adjustment systems
this part
Not covered in
2.2. PPE enclosing the parts of the body to be protected
this part
2.3. PPE for the face, eyes and respiratory system 4.8, 4.9
2.4. PPE subject to ageing 7, 8
2.8. PPE for intervention in very dangerous situations 4.3.2.2.3, 8
2.12 PPE bearing one or more identification or
recognition marks directly or indirectly relating to health 4.4, 7
and safety
Essential Requirements of Clause(s)/subclause(
Remarks/Notes
Regulation (EU) 2016/425 s) of this EN
3.1.1. Impact caused by falling or ejected objects and
4.7
collisions of parts of the body with an obstacle
WARNING 1 Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
International
Standard
ISO 10256-3
Second edition
Protective equipment for use in ice
2024-07
hockey —
Part 3:
Face and eye protectors for skaters
Équipements de protection destinés à être utilisés en hockey
sur glace —
Partie 3: Protections faciales et oculaires pour les patineurs
Reference number
ISO 10256-3:2024(en) © ISO 2024
ISO 10256-3:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 10256-3:2024(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements . 4
4.1 Types of eye or face protectors .4
4.2 Ergonomics .4
4.3 Innocuousness .4
4.3.1 Materials .4
4.3.2 Design . .4
4.4 Markings and information .5
4.5 Protected area .5
4.5.1 Type B1 and B2 — Face protectors .5
4.5.2 Type C — Eye protectors .6
4.6 Penetration (test blade) .6
4.7 Puck impact resistance .6
4.7.1 Types B1, B2.6
4.7.2 Type C .7
4.8 Field of vision .7
4.9 Optical quality . .7
4.9.1 Visual inspection .7
4.9.2 Luminous transmittance .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.