SIST EN ISO 6433:2012
(Main)Technical product documentation - Part references (ISO 6433:2012)
Technical product documentation - Part references (ISO 6433:2012)
This International Standard gives rules for the presentation of part references in assembly representations,
e.g. on assembly drawings, in order to identify the constituent parts in a related parts list.
Technische Zeichnungen - Positionsnummern (ISO 6433:2012)
Diese Internationale Norm definiert Regeln für die Angabe von Bauteil Positionsnummern in Zusammen-baudarstellungen, beispielsweise in Zusammenbauzeichnungen, damit die einzelnen Bauteile in einer zuge-hörigen Stückliste identifiziert werden können.
Documentation technique de produits - Références de pièce (ISO 6433:2012)
La présente Norme internationale fournit des règles de représentation des références de pièce dans des
représentations d'ensemble, par exemple sur des dessins représentant des ensembles, afin d'identifier les
éléments constitutifs dans une nomenclature de composants associée.
Tehnične risbe - Pozicioniranje delov (ISO 6433:2012)
Ta mednarodni standard določa pravila za prikaz pozicioniranja delov v prikazih sestave, npr. pri risbah sestave, da se določijo sestavni deli na zadevnem seznamu delov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 6433:2012
01-julij-2012
1DGRPHãþD
SIST EN ISO 6433:1998
7HKQLþQHULVEH3R]LFLRQLUDQMHGHORY,62
Technical product documentation - Part references (ISO 6433:2012)
Technische Zeichnungen - Positionsnummern (ISO 6433:2012)
Documentation technique de produits - Références de pièce (ISO 6433:2012)
Ta slovenski standard je istoveten z: EN ISO 6433:2012
ICS:
01.100.01 7HKQLþQRULVDQMHQDVSORãQR Technical drawings in
general
SIST EN ISO 6433:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 6433:2012
---------------------- Page: 2 ----------------------
SIST EN ISO 6433:2012
EUROPEAN STANDARD
EN ISO 6433
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2012
ICS 01.110 Supersedes EN ISO 6433:1994
English Version
Technical product documentation - Part references (ISO
6433:2012)
Documentation technique de produits - Références de Technische Zeichnungen - Positionsnummern (ISO
pièce (ISO 6433:2012) 6433:2012)
This European Standard was approved by CEN on 10 May 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6433:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 6433:2012
EN ISO 6433:2012 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 6433:2012
EN ISO 6433:2012 (E)
Foreword
This document (EN ISO 6433:2012) has been prepared by Technical Committee ISO/TC 10 "Technical
product documentation" in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2012, and conflicting national standards shall be withdrawn
at the latest by November 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 6433:1994.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 6433:2012 has been approved by CEN as a EN ISO 6433:2012 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 6433:2012
---------------------- Page: 6 ----------------------
SIST EN ISO 6433:2012
INTERNATIONAL ISO
STANDARD 6433
Second edition
2012-05-15
Technical product
documentation — Part references
Documentation technique de produits — Références de pièce
Reference number
ISO 6433:2012(E)
©
ISO 2012
---------------------- Page: 7 ----------------------
SIST EN ISO 6433:2012
ISO 6433:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 6433:2012
ISO 6433:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.