Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements

This European Standard specifies the significant hazards, hazardous situations and events, common to rail bound machines and arising due to the adaptation for their use on railways. These machines are intended for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, see Clause 4. This European Standard applies to railbound machines and other vehicles - referred to as machines - working exclusively on the railway (utilising friction adhesion between the rail and rail wheels) but including machines that in working position are partly supported on the ballast or the formation and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment. This European Standard applies to machines that are intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex D. This European Standard specifies the common hazards, in normal circumstances, during running, assembly and installation, commissioning, use (including setting, programming, and process changeover), operation, cleaning, fault finding, maintenance and de-commissioning of the machines. Additional safety measures can be required by exceptional circumstances, such as extreme ambient temperatures (less than - 20 °C or greater than + 40 °C), highly corrosive or contaminating environment; e.g. due to the presence of chemicals, and potentially explosive atmospheres. Air pressure caused by the passing of high-speed trains at more than 190 km/h is also not dealt with. The common hazards specified include the general hazards presented by the machines, and also the hazards presented by the following specific machine functions, common to two or more machine types: - ballast excavation, ballast cleaning, ballast regulating, ballast consolidating; - tamping; - track renewal; - craning; - maintenance of the components of the infrastructure; during commissioning, use, maintenance and servicing. This European Standard does not deal comprehensively with specific machine functions other than the common functions listed in the previous paragraph, or with all possible hazards presented by complete machines or by the combination of functions.

Bahnanwendungen - Oberbau - Schienengebundene Bau- und Instandhaltungsmaschinen - Teil 3: Allgemeine Sicherheitsanforderungen

1.1   Allgemeines
Diese Europäische Norm legt die signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungs-ereignisse, die von schienengebundenen Maschinen ausgehen können und während ihres Einsatzes entstehen können, fest. Diese Maschinen werden für den vorgesehenen Einsatz bei Bau, Instandhaltung und Inspektion des Oberbaus, Bauwerke, Unterbau und der Fahrleitungsanlagen (Oberleitung und Stromschiene) eingesetzt unter Bedingungen für einen fehlerhaften Einsatz, der vom Hersteller begründbar vorhergesehen werden kann, siehe Abschnitt 4.
Diese Europäische Norm gilt für alle schienengebundenen Maschinen und anderen Fahrzeuge  nach¬folgend Maschine genannt  für Arbeiten auf dem Gleis (unter Verwendung von Reibung zwischen Schiene und Rädern) und für Bau, Instandhaltung und Untersuchung des Gleises, Bauwerke, Infrastruktur und der Fahrleitungsanlagen (Oberleitung und Stromschiene). Diese Europäische Norm gilt für Maschinen, die für den Einsatz mit Signal- und Steuerungssystemen gebaut sind. Anforderungen an ähnliche Maschinen sind in anderen Europäischen Normen festgelegt, siehe Anhang D.
Diese Europäische Norm legt die allgemeinen Gefährdungen unter normalen Umständen während des Fahrens, des Zusammenbaus, der Installation, der Inbetriebnahme, des Einsatzes (eingeschlossen die Einstellung, die Programmierung und Prozesswechsel), Arbeitseinsatz, Reinigen, Fehlersuche, Instand¬haltung und Außerbetriebsetzung der Maschinen fest. Bei außergewöhnlichen Umständen können zusätzliche Sicherheitsmaßnahmen erforderlich sein, z. B. extreme Umgebungstemperaturen (weniger als 20 °C oder größer als 40 °C), hoch korrosive oder kontaminierte Umgebung, z. B. Vorhandensein von Chemikalien, und potentielle explosive Atmosphären. Luftdrücke, die durch die Vorbeifahrt von Hochgeschwindigkeitszügen mit mehr als 190 km/h verursacht werden, werden nicht behandelt.

Applications ferroviaires - Voie - Machines de construction et de maintenance empruntant exclusivement les voies ferrées - Partie 3 : Prescriptions générales pour la sécurité

Le présent document concerne les risques significatifs, situations et événements dangereux, pour le travail des machines et autres véhicules utilisés pour la construction, la maintenance et l’inspection de la voie, des ouvrages d'art, des infrastructures et des installations fixes de traction électrique, selon le prEN 14033 1:2007.
La présente Norme européenne s'applique a toutes les machines empruntant exclusivement les voies ferrées et autres véhicules (y compris les machines, qui en position de travail, prennent partiellement appui sur le ballast ou la plate-forme) [référencés comme des machines], destinées exclusivement pour le travail en voie ferrée (utilisant l’adhérence entre le rail et les roues) et utilisées pour la construction, la maintenance, et l’inspection de la voie, des ouvrages d'art, des infrastructures, des installations fixes de traction électrique.
La présente norme traite des risques communs qui se produisent en circonstances normales, durant le transport, l'assemblage et l'installation, la mise en service, l'utilisation (y compris montage, programmation et changement des procédés), le nettoyage, la localisation des défauts, l’entretien et la mise hors service des machines.
Des mesures de sécurité supplémentaires peuvent etre exigées dans des circonstances exceptionnelles telles :
   que températures ambiantes extremes (températures tropicales ou polaires) ;
   environnement hautement corrosif ou contaminant, par exemple provoqué par la présence de produits chimiques, et atmospheres potentiellement explosives.
La pression de l'air causée par le passage des trains a grande vitesse supérieures a 190 km/h n'est pas traité.
NOTE 1   Les mesures spécifiques en cas de circonstances exceptionnelles ne concernent pas la présente norme. Celles-ci peuvent faire l'objet de négociations entre le fabricant et l'opérateur.

Železniške naprave - Zgornji ustroj - Težka tirna mehanizacija za gradnjo in vzdrževanje - 3. del: Splošne varnostne zahteve

Ta evropski standard opredeljuje bistvene nevarnosti, nevarne situacije in dogodke, ki so skupne tirni mehanizaciji in do katerih pride zaradi prilagoditve njene uporabe na železniških progah. Ti stroji so namenjeni konstrukciji, vzdrževanju in nadzoru tračnic, struktur, infrastrukture in fiksne električne vlečne opreme, ko se uporabljajo kot predvideno in pod pogoji napačne uporabe, ki jo proizvajalec lahko upravičeno predvidi (glej Klavzulo 4). Ta evropski standard velja za železniške stroje in druga vozila – ki se imenujejo stroji – ki delujejo izključno na železniških tirih (z uporabo tornega oprijemanja med tiri in železniškimi kolesi), a vključno s stroji, ki jih v delovnem položaju delno podpira balast ali formacija in se uporabljajo za konstrukcijo, vzdrževanje in nadzor tračnic, struktur, infrastrukture in fiksne električne vlečne opreme. Ta evropski standard velja za stroje, ki so namenjeni upravljanju signalnih in krmilnih sistemov. Druge podobne stroje obravnavajo drugi evropski standardi (glej Prilogo D). Ta evropski standard določa skupne nevarnosti v normalnih okoliščinah med delovanjem, sestavljanjem in vgradnjo, prevzemom, uporabo (vključno z nastavitvijo, programiranjem in postopkom prehoda), upravljanjem, čiščenjem, iskanjem napak, vzdrževanjem in izločitvijo strojev iz uporabe. Dodatni varnostni ukrepi so lahko potrebni v izjemnih okoliščinah, kot so ekstremna temperatura okolja (pod -20°C  ali nad +40 °C), možno korozivno ali strupeno okolje, npr. zaradi prisotnosti kemikalij, in potencialno eksplozivne atmosfere. Ne obravnava zračnega pritiska, ki ga povzročajo hitri vlaki pri več kot 190 km/h. Opisane skupne nevarnosti vključujejo splošne nevarnosti, ki jih predstavljajo stroji, ter nevarnosti, ki jih predstavljajo naslednje posebne funkcije mehanizacije, skupne dvema ali več vrstam strojev: - izkopavanje balasta, čiščenje balasta, uravnavanje balasta, utrjevanje balasta, - gramoziranje, - obnova tračnic, - dvigovanje, - vzdrževanje infrastrukturnih komponent med prevzemom, uporabo in servisiranjem. Ta evropski standard razen skupnih funkcij, navedenih v prejšnjem odstavku, posebnih funkcij mehanizacije ne obravnava celostno niti ne obravnava vseh možnih nevarnosti, ki jih predstavlja celotna mehanizacija ali kombinacija funkcij.

General Information

Status
Withdrawn
Public Enquiry End Date
09-Oct-2007
Publication Date
18-Jan-2010
Withdrawal Date
16-Nov-2011
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
17-Nov-2011
Due Date
10-Dec-2011
Completion Date
17-Nov-2011

Relations

Buy Standard

Standard
SIST EN 14033-3:2010
English language
49 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Železniške naprave - Zgornji ustroj - Težka tirna mehanizacija za gradnjo in vzdrževanje - 3. del: Splošne varnostne zahteveBahnanwendungen - Oberbau - Schienengebundene Bau- und Instandhaltungsmaschinen - Teil 3: Allgemeine SicherheitsanforderungenApplications ferroviaires - Voie - Machines de construction et de maintenance empruntant exclusivement les voies ferrées - Partie 3 : Prescriptions générales pour la sécuritéRailway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements45.120åLþQLFEquipment for railway/cableway construction and maintenanceICS:Ta slovenski standard je istoveten z:EN 14033-3:2009SIST EN 14033-3:2010en01-februar-2010SIST EN 14033-3:2010SLOVENSKI

STANDARD
SIST EN 14033-3:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14033-3
December 2009 ICS 93.100 English Version

Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements

Applications ferroviaires - Voie - Machines de construction et de maintenance empruntant exclusivement les voies ferrées - Partie 3: Prescriptions générales pour la sécurité Bahnanwendungen - Oberbau - Schienengebundene Bau- und Instandhaltungsmaschinen - Teil 3: Allgemeine Sicherheitsanforderungen This European Standard was approved by CEN on 21 November 2009.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,

B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14033-3:2009: ESIST EN 14033-3:2010

EN 14033-3:2009 (E) 2 Contents Page Foreword ..............................................................................................................................................................5Introduction .........................................................................................................................................................61Scope ......................................................................................................................................................71.1General ....................................................................................................................................................71.2Validity of this European Standard ......................................................................................................82Normative references ............................................................................................................................83Terms and definitions ........................................................................................................................ 114List of significant hazards ................................................................................................................. 115General safety requirements and/or protective measures ............................................................. 125.1General ................................................................................................................................................. 125.2Access to working places .................................................................................................................. 125.2.1Working cabs and combined working and driving cabs ................................................................ 125.2.2Working places, places for control and maintenance outside of cabs ......................................... 125.2.3Walkways on the machine ................................................................................................................. 125.3Ergonomics ......................................................................................................................................... 135.4Requirements for working cabs ........................................................................................................ 135.4.1Minimum dimensions in working cabs ............................................................................................. 135.4.2Working cab floors ............................................................................................................................. 135.4.3Storage for instruction handbook ..................................................................................................... 135.4.4Emergency exit ................................................................................................................................... 135.4.5Climatic conditions ............................................................................................................................. 135.4.6Protection from dust .......................................................................................................................... 145.4.7Windows .............................................................................................................................................. 145.4.8Interior lighting .................................................................................................................................... 145.5Operators' seats .................................................................................................................................. 145.6Edges and corners.............................................................................................................................. 155.7Pipes and hoses.................................................................................................................................. 155.8Communications between work positions ....................................................................................... 155.9Stability and measures preventing derailment ................................................................................ 155.10Visibility of working tools and working areas ................................................................................. 155.11Visibility of the track ahead of the machine in the direction of movement .................................. 155.12Emergency devices ............................................................................................................................ 165.12.1Emergency stopping devices for working equipment .................................................................... 165.12.2Emergency stopping device for movement of machines ............................................................... 165.12.3Action of emergency stopping devices ............................................................................................ 165.13Hazards associated with high working places and their access ................................................... 165.14Moving parts and materials ............................................................................................................... 165.14.1General ................................................................................................................................................. 165.14.2Wheels and caterpillar tracks ............................................................................................................ 175.15Operator's controls and indicators ................................................................................................... 175.15.1General ................................................................................................................................................. 175.15.2Starting systems ................................................................................................................................. 175.15.3Inadvertent activation ......................................................................................................................... 175.15.4Pedals .................................................................................................................................................. 175.15.5Protection against uncontrolled motion in working configuration ............................................... 175.15.6Control panels and indicators ........................................................................................................... 185.15.7Marking of controls and indicators ................................................................................................... 185.16Thermal hazards ................................................................................................................................. 185.17Electrical hazards ............................................................................................................................... 18SIST EN 14033-3:2010

EN 14033-3:2009 (E) 3 5.17.1Electrical equipment ........................................................................................................................... 185.17.2Disconnection devices ........................................................................................................................ 185.17.3Electrical enclosures ........................................................................................................................... 185.17.4Conductors, cables and wiring practices ......................................................................................... 195.17.5Batteries ............................................................................................................................................... 195.17.6Catenaries ............................................................................................................................................ 195.17.7Earthing ................................................................................................................................................ 195.18Machine safety requirements related to electromagnetic compatibility ....................................... 195.19Emission of gas and particles ............................................................................................................ 205.19.1Exhaust gasses ................................................................................................................................... 205.19.2Protection from dust ........................................................................................................................... 205.20Pressurised systems ........................................................................................................................... 205.21Fuel tanks and hydraulic tanks .......................................................................................................... 205.22Noise reduction ................................................................................................................................... 215.23Vibration ............................................................................................................................................... 215.23.1General ................................................................................................................................................. 215.23.2Whole body vibration .......................................................................................................................... 225.23.3Hand arm vibration .............................................................................................................................. 225.24Protection from the risks of fire ......................................................................................................... 225.24.1General ................................................................................................................................................. 225.24.2Material requirements ......................................................................................................................... 225.24.3Fire detection system .......................................................................................................................... 225.24.4Fire extinguishing system .................................................................................................................. 225.24.5Portable fire extinguishers ................................................................................................................. 225.25Braking systems .................................................................................................................................. 235.26Lighting................................................................................................................................................. 235.27Warning systems ................................................................................................................................. 235.27.1General ................................................................................................................................................. 235.27.2System for warning personnel of machine or working movement ................................................ 235.28Maintenance ......................................................................................................................................... 245.28.1General ................................................................................................................................................. 245.28.2Frequent maintenance ........................................................................................................................ 245.28.3Support devices ................................................................................................................................... 245.28.4Access to the engine compartment ................................................................................................... 245.29Safe handling ....................................................................................................................................... 246Additional safety requirements and/or measures for specific machine functions ...................... 246.1Conveyors ............................................................................................................................................ 246.2Rail handling devices .......................................................................................................................... 256.3Portal cranes mounted on railbound machines ............................................................................... 256.4Cranes and lifting devices fixed on the machine ............................................................................. 266.5Transport of loads by rail cranes ....................................................................................................... 266.6Elevating work platforms .................................................................................................................... 267Verification of the conformity to the safety requirements and/or particular safety measures .............................................................................................................................................. 277.1General ................................................................................................................................................. 277.2Methods of examination ..................................................................................................................... 277.2.1General ................................................................................................................................................. 277.2.2Visual check ......................................................................................................................................... 277.2.3Measurement ....................................................................................................................................... 277.2.4Functional test ..................................................................................................................................... 277.2.5Load test(s) .......................................................................................................................................... 277.2.6Specific verification/measurements and other controls ................................................................. 278Information for use .............................................................................................................................. 278.1Instruction handbook .......................................................................................................................... 278.1.1General ................................................................................................................................................. 278.1.2Specific information in instruction handbook .................................................................................. 288.1.3Restrictions of use .............................................................................................................................. 298.1.4Warning systems ................................................................................................................................. 29SIST EN 14033-3:2010

EN 14033-3:2009 (E) 4 8.1.5Information for maintenance ............................................................................................................. 298.1.6Vibration .............................................................................................................................................. 298.2Warning signs and written warnings ................................................................................................ 31Annex A (normative)

List of significant hazards .......................................................................................... 32Annex B (normative)

Check list for conformity ............................................................................................ 35Annex C (normative)

Noise test code (grade of accuracy 2) ....................................................................... 39C.1Scope ................................................................................................................................................... 39C.2Definitions ........................................................................................................................................... 39C.3Determination of the emission sound pressure level at the work station or other specified positions .............................................................................................................................................. 39C.4Sound power level determination ..................................................................................................... 39C.5Installation and mounting conditions ............................................................................................... 40C.6Working conditions ............................................................................................................................ 40C.7Measurement uncertainties ............................................................................................................... 41C.8Information to be recorded ................................................................................................................ 42C.9Information to be reported ................................................................................................................. 42C.10Declaration and verification of noise emission values ................................................................... 42Annex D (informative)

Structure of European Standards for track construction and maintenance machines ............................................................................................................................................. 45Annex ZA (informative)

Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC ........................................................................................... 46Annex ZB (informative)

Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC ....................................................................................... 47Bibliography ..................................................................................................................................................... 48 SIST EN 14033-3:2010

EN 14033-3:2009 (E) 5 Foreword This document (EN 14033-3:2009) has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directives. For relationship with EU Directives, see informative Annexes ZA and ZB, which are integral parts of this document. EN 14033, Railway applications — Track — Railbound construction and maintenance machines, consists of the following parts:  Part 1: Technical requirements for running  Part 2: Technical requirements for working  Part 3: General safety requirements According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 14033-3:2010

EN 14033-3:2009 (E) 6 Introduction This document is a type C standard as stated in EN ISO 12100-1:2003. The machinery concerned and the extent to which hazards, hazardous situations and hazardous events are covered are indicated in the scope of this document. When provisions of this type C standard are different from those, which are stated in type B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard. SIST EN 14033-3:2010

EN 14033-3:2009 (E) 7 1 Scope 1.1 General This European Standard specifies the significant hazards, hazardous situations and events, common to rail bound machines and arising due to the adaptation for their use on railways. These machines are intended for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, see Clause 4. This European Standard applies to railbound machines and other vehicles - referred to as machines - working exclusively on the railway (utilising friction adhesion between the rail and rail wheels) but including machines that in working position are partly supported on the ballast or the formation and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment. This European Standard applies to machines that are intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex D. This European Standard specifies the common hazards, in normal circumstances, during running, assembly and installation, commissioning, use (including setting, programming, and process changeover), operation, cleaning, fault finding, maintenance and de-commissioning of the machines. Additional safety measures can be required by exceptional circumstances, such as extreme ambient temperatures (less than

– 20 °C or greater than + 40 °C), highly corrosive or contaminating environment; e.g. due to the presence of chemicals, and potentially explosive atmospheres. Air pressure caused by the passing of high-speed trains at more than 190 km/h is also not dealt with. NOTE 1 Specific measures for exceptional circumstances are not dealt with in this European Standard. The specific measures for exceptional circumstances introduced by a railway infrastructure manager and requirements introduced by the manufacturer and/or machine operator as referred to in the scope are not dealt with in this European Standard. When such additional measures are necessary, they should be agreed between the manufacturer and the machine operator. The manufacturer will be responsible for compliance with the Directive(s) concerned independent of this European Standard for additional hazards created by any additional or alternative requirements. NOTE 2 This European Standard deals only with the additional hazards from the adaptation of a machine for its use on rail. Other standards specific to the particular machine as far as available will need to be used in addition to this European Standard to give the complete requirements. The common hazards specified include the general hazards presented by the machines, and also the hazards presented by the following specific machine functions, common to two or more machine types:  ballast excavation, ballast cleaning, ballast regulating, ballast consolidating;  tamping;  track renewal;  craning;  maintenance of the components of the infrastructure; during commissioning, use, maintenance and servicing. This European Standard does not deal comprehensively with specific machine functions other than the common functions listed in the previous paragraph, or with all possible hazards presented by complete machines or by the combination of functions. NOTE 3 For such specific functions or hazards, the use of specific European Standards is recommended. This European Standard does not deal with: SIST EN 14033-3:2010

EN 14033-3:2009 (E) 8  requirements with regard to the quality of work and the performance of the machine;  machines that utilise the catenary for traction purposes;  specific requirements introduced by a railway infrastructure manager;  additional or alternative requirements introduced by the manufacturer and/or operator. 1.2 Validity of this European Standard This European Standard applies to all machines, which are ordered after one year from the publication date of this European Standard. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2, Classification of fires EN 3 (all parts), Portable fire extinguishers EN 280, Mobile elevating work platforms — Design calculations — Stability criteria — Construction — Safety — Examinations and tests EN 349, Safety of machinery — Minimum gaps to avoid crushing of parts of the human body EN 474-1:2006+A1:2009, Earth-moving machinery — Safety — Part 1: General requirements EN 547-1, Safety of machinery — Human body measurements — Part 1: Principles for determining the dimensions required for openings for whole body access into machinery EN 547-2, Safety of machinery — Human body measurements — Part 2: Principles for determining the dimensions required for access openings EN 547-3, Safety of machinery — Human body measurements — Part 3: Anthropometric data EN 614-1, Safety of machinery — Ergonomic design principles — Part 1: Terminology and general principles EN 614-2, Safety of machinery — Ergonomic design principles — Part 2: Interactions between the design of machinery and work tasks EN 618, Continuous handling equipment and systems — Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors EN 619, Continuous handling equipment and systems — Safety and EMC requirements for equipment for mechanical handling of unit loads EN 620, Continuous handling equipment and systems — Safety and EMC requirements for fixed belt conveyors for bulk materials EN 842, Safety of machinery — Visual danger signals — General require

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.