SIST-TS CEN/TS 15427-2-2:2023

Railway applications - Wheel/Rail friction management - Part 2-2: Properties and Characteristics - Top of Rail materials

This document specifies the requirements of materials intended to be applied to the interface between the wheel tread and the rail crown (active interface). It can be applied either directly or indirectly to the wheel tread or rail.
It outlines the information required for most approval procedures, the method of testing and routine control/monitoring of the material.
This document does not deal with adhesion materials, for example:
-   sand;
-   adhesion enhancers.

Bahnanwendungen - Reibungsmanagement zwischen Rad und Schiene - Teil 2-2: Eigenschaften und Merkmale - Kraftschlussmodifikatoren

Dieses Dokument legt die Anforderungen an Materialien für die Anwendung auf der Kontaktfläche zwischen der Radlauffläche und der Fahrfläche der Schiene (aktive Kontaktfläche) fest. Diese können direkt oder indirekt auf die Radlauffläche oder die Schiene angewendet werden.
Es beschreibt die erforderlichen Informationen für die meisten Genehmigungsverfahren, das Prüfverfahren und die regelmäßige Kontrolle/Überwachung des Materials.
Dieses Dokument behandelt keine kraftschlusserhöhenden Materialien wie etwa:
   Sand;
   Haftverstärker.

Applications ferroviaires - Gestion des frottements roue/rail - Partie 2-2 : Propriétés et caractéristiques - Lubrifiants de tête de rail

Železniške naprave - Trenje na stiku kolo-tirnica - 2-2. del: Lastnosti in karakteristike - Materiali za zgornjo površino tirnic

Ta dokument določa zahteve materialov, namenjenih za uporabo na vmesniku med kolesnim obročem in zgornjim robom tirnice (aktivni vmesnik). Uporabljati ga je mogoče posredno ali neposredno za kolesni obroč oziroma tirnico.
Podaja informacije, ki se zahtevajo pri večini postopkov odobritve, preskusno metodo in rutinsko kontrolo/spremljanje materiala.
Dokument ne obravnava lepilnih materialov, na primer:
–   peska;
–   izdelkov za izboljšanje lepljenja.

General Information

• Status: Published
• Publication Date: 23-Oct-2023
• ICS: 45.040 - Materials and components for railway engineering
• ICS: 45.080 - Rails and railway components
• ICS: 45.120 - Equipment for railway/cableway construction and maintenance
• Technical Committee: IŽNP - Reilway applications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 19-Oct-2023
• Due Date: 24-Dec-2023
• Completion Date: 24-Oct-2023
• Ref Project: CEN/TS 15427-2-2:2023 - Railway applications - Wheel/rail friction management - Part 2-2: Properties and characteristics - Top of rail materials

Relations

• Replaces: SIST-TS CEN/TS 15427-2-2:2021 - Railway applications - Wheel/Rail friction management - Part 2-2: Properties and Characteristics - Top of Rail materials
• Effective Date: 01-Dec-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 15427-2-2:2023
01-december-2023
Nadomešča:
SIST-TS CEN/TS 15427-2-2:2021
Železniške naprave - Trenje na stiku kolo-tirnica - 2-2. del: Lastnosti in
karakteristike - Materiali za zgornjo površino tirnic
Railway applications - Wheel/Rail friction management - Part 2-2: Properties and
Characteristics - Top of Rail materials
Bahnanwendungen - Reibungsmanagement zwischen Rad und Schiene - Teil 2-2:
Eigenschaften und Merkmale - Kraftschlussmodifikatoren
Applications ferroviaires - Gestion des frottements roue/rail - Partie 2-2 : Propriétés et
caractéristiques - Lubrifiants de tête de rail
Ta slovenski standard je istoveten z: CEN/TS 15427-2-2:2023
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
45.080 Tračnice in železniški deli Rails and railway
components
SIST-TS CEN/TS 15427-2-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 15427-2-2:2023

---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 15427-2-2:2023


CEN/TS 15427-2-2
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

October 2023
TECHNISCHE SPEZIFIKATION
ICS 45.080; 45.120 Supersedes CEN/TS 15427-2-2:2021
English Version

Railway applications - Wheel/rail friction management -
Part 2-2: Properties and characteristics - Top of rail
materials
Applications ferroviaires - Gestion des frottements Bahnanwendungen - Reibungsmanagement zwischen
roue/rail - Partie 2-2 : Propriétés et caractéristiques - Rad und Schiene - Teil 2-2: Eigenschaften und
Lubrifiants de tête de rail Merkmale - Kraftschlussmodifikatoren
This Technical Specification (CEN/TS) was approved by CEN on 9 July 2023 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15427-2-2:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 15427-2-2:2023
CEN/TS 15427-2-2:2023 (E)
Contents Page
European foreword .4
Introduction .6
1 Scope .7
2 Normative references .7
3 Terms and definitions .8
4 Design requirements . 10
5 Technical specification and product approval . 10
5.1 Introduction . 10
5.2 Product specification . 10
5.3 Technical file . 11
6 Control and monitoring of product . 11
...