SIST EN 13146-4:2004
(Main)Railway applications - Track - Test methods for fastening systems - Part 4: Effect of repeated loading
Railway applications - Track - Test methods for fastening systems - Part 4: Effect of repeated loading
This part of EN 13146 specifies a laboratory test procedure for applying repeated displacement cycles representative of the displacements caused by traffic on railway track. It is intended to be used for assessing the long term performance of direct fastening systems for use with concrete sleepers. Performance requirements based on this test method are included in EN 13481-2.
Bahnanwendungen - Oberbau - Prüfverfahren für Schienenbefestigungssysteme - Teil 4: Dauerschwingversuch
Dieser Teil der Normenreihe EN 13146 legt ein Laborprüfverfahren zur Aufbringung wiederkehrender Belastungen
fest, repräsentativ für die Verschiebungen, die vom Verkehr auf Eisenbahngleisen hervorgerufen werden. Er wird
zur Bewertung der Langzeitleistung direkter Befestigungssysteme verwendet.
Dieses Prüfverfahren gilt für ein komplettes Schienenbefestigungssystem.
Applications ferroviaires - Voie - Méthodes d'essai pour les systemes de fixation - Partie 4: Effets produits par des charges répétitives
La présente partie de la présente Norme européenne prescrit une méthode d'essai en laboratoire permettant l'application de cycles répétitifs de déplacements, représentatifs des déplacements provoqués par les circulations sur une voie. Elle est utilisée pour l'estimation des performances a long terme des systemes de fixation directs.
L'application de cette méthode d'essai est destinée a un ensemble de fixation complet.
Železniške naprave – Zgornji ustroj – Preskušanje pritrdilnih sistemov – 4. del: Učinek ponavljajoče se obremenitve
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bahnanwendungen - Oberbau - Prüfverfahren für Schienenbefestigungssysteme - Teil 4: DauerschwingversuchApplications ferroviaires - Voie - Méthodes d'essai pour les systemes de fixation - Partie 4: Effets produits par des charges répétitivesRailway applications - Track - Test methods for fastening systems - Part 4: Effect of repeated loading93.100Gradnja železnicConstruction of railwaysICS:Ta slovenski standard je istoveten z:EN 13146-4:2002SIST EN 13146-4:2004en01-marec-2004SIST EN 13146-4:2004SLOVENSKI
STANDARD
SIST EN 13146-4:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13146-4November 2002ICS 93.100English versionRailway applications - Track - Test methods for fasteningsystems - Part 4: Effect of repeated loadingApplications ferroviaires - Voie - Méthodes d'essai pour lessystèmes de fixation - Partie 4: Effets produits par descharges répétitivesBahnanwendungen - Oberbau - Prüfverfahren fürSchienenbefestigungssysteme - Teil 4:DauerschwingversuchThis European Standard was approved by CEN on 2 October 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13146-4:2002 ESIST EN 13146-4:2004
EN 13146-4:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions, symbols and abbreviations.43.1Terms and definitions.43.2Symbols and abbreviations.44Principle.55Apparatus.65.1Rail.65.2Actuator.65.3Load application head.65.4Displacement measuring instruments.65.5Load measuring instruments.65.6Verification of calibration.66Test specimens.66.1Sleeper or other rail support.66.2Fastening.67Procedure for one rail seat.67.1General.67.2Preparation for test.77.2.1In line fastening.77.2.2Offset fastening.77.3Clamping force.77.4Longitudinal rail restraint.77.5Vertical stiffness.77.6Cyclic loading.87.7Repeat tests.87.8Final inspection.88Alternative test procedure.108.1General.108.2Apparatus.108.2.1General.108.2.2Loading frame.108.3Procedure.128.3.1General.128.3.2Preparation for test.128.3.3Clamping force.128.3.4Longitudinal rail restraint.128.3.5Vertical stiffness.138.3.6Cyclic loading.138.3.7Repeat tests.138.3.8Final inspection.139Test report.13SIST EN 13146-4:2004
EN 13146-4:2002 (E)3ForewordThis document (EN 13146-4:2002) has been prepared by Technical Committee CEN /TC 256 "Railwayapplications", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by May 2003, and conflicting national standards shall be withdrawn at the latest byMay 2003.This document has been prepared under mandates (M/0241), M/2752)) given to CEN by the European Commissionand the European Free Trade Association, and supports essential requirements of EU Directive(s). No existingEuropean Standard is superseded.This European Standard is one of the series EN 13146 as listed below :¾ Part 1 : Determination of longitudinal rail restraint¾ Part 2 : Determination of torsional resistance¾ Part 3 : Determination of attenuation of impact loads¾ Part 4 : Effect of repeated loading¾ Part 5 : Determination of electrical resistance¾ Part 6 : Effect of severe environmental conditions¾ Part 7 : Determination of clamping force¾ Part 8 : In service testingThese support the requirements in the series EN 13481 Railway applications — Track — Performancerequirements for fastening systems — Parts 1 to 7.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.
1) Railway equipment.2) Standardization in the field of Railway Equipment on the Interoperability of the Trans-European High-Speed Rail System.SIST EN 13146-4:2004
EN 13146-4:2002 (E)41 ScopeThis Part of this European Standard specifies a laboratory test procedure for applying repeated displacementcycles representative of the displacements caused by traffic on railway track. It is used for assessing the long termperformance of direct fastening systems.This test procedure applies to a complete fastening assembly.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 13146-1, Railway applications — Track — Test methods for fastening systems — Part 1: Determination oflongitudinal rail restraint.EN 13146-7, Railway applications — Track — Test methods for fastening systems — Part 7: Determination ofclamping force.EN 13481-1:2002, Railway applications — Track — Performance requirements for fastening systems —Part 1: Definitions.EN 13481-2, Railway applications — Track — Performance requirements for fastening systems —Part 2: Fastening systems for concrete sleepers.EN 13481-3, Railway applications — Track — Performance requirements for fastening systems —Part 3: Fastening systems for wood sleepers.EN 13481-4, Railway applications — Track — Performance requirements for fastening systems —Part 4: Fastening systems for steel sleepers.EN 13481-5, Railway applications — Track — Performance requirements for fastening systems —Part 5: Fastening systems for slab track.ENV 13481–6, Railway applications — Track — Performance requirements for fastening systems —Part 6: Special fastening systems for attenuation of vibration.prEN 13481-7, Railway applications - Track -Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossing andcheck rails.3 Terms and definitions, symbols and abbreviations3.1 Terms and definitionsFor
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.