SIST EN ISO 26443:2024
(Main)Fine ceramics (advanced ceramics, advanced technical ceramics) - Rockwell indentation test for evaluation of adhesion of ceramic coatings (ISO 26443:2023)
Fine ceramics (advanced ceramics, advanced technical ceramics) - Rockwell indentation test for evaluation of adhesion of ceramic coatings (ISO 26443:2023)
ISO 26443:2008 specifies a method for the qualitative evaluation of the adhesion of ceramic coatings up to 20 µm thick by indentation with a Rockwell diamond indenter. The formation of cracks after indentation may also reveal cohesive failure. The indentations are made with a Rockwell hardness test instrument.
The method described may also be suitable for evaluating the adhesion of metallic coatings.
The test is not suitable for elastic coatings on hard substrates.
Hochleistungskeramik - Rockwell-Eindringprüfung zur Bewertung der Haftung von keramischen Schichten (ISO 26443:2023)
Dieses Dokument legt ein Verfahren zur qualitativen Bewertung der Haftung keramischer Schichten mit einer Dicke von bis zu 20 µm fest, bei dem mit einem für die Rockwell Härteprüfung verwendeter Diamant Eindringkörper ein Eindruck erzeugt wird. Die Bildung von Rissen am Eindruck kann auch ein Kohäsionsversagen erkennen lassen. Die Eindrücke werden mit einem Rockwell Härteprüfgerät erzeugt.
Das in diesem Dokument beschriebene Verfahren kann auch zur Bewertung der Haftung metallischer Schichten geeignet sein.
Diese Prüfung ist für elastische Schichten auf harten Grundwerkstoffen nicht geeignet.
Céramiques techniques - Évaluation de l'adhérence des revêtements céramiques par l'essai de pénétration Rockwell (ISO 26443:2023)
L'ISO 26443:2008 spécifie une méthode permettant l'évaluation qualitative de l'adhérence de revêtements céramiques jusqu'à 20 µm d'épaisseur par indentation à l'aide d'un pénétrateur diamanté de Rockwell. La formation de fissures après l'indentation peut également révéler une rupture cohésive. Les indentations sont réalisées à l'aide d'un instrument d'essai de dureté Rockwell.
La méthode décrite dans la présente Norme internationale peut également être adaptée à l'évaluation de l'adhérence de revêtements métalliques.
L'essai n'est pas adapté aux revêtements élastiques sur des substrats durs.
Fina keramika (sodobna keramika, sodobna tehnična keramika) - Preskus z vtiskanjem po Rockwellu za ovrednotenje sprijemnosti keramičnih prevlek (ISO 26443:2023)
Standard ISO 26443:2008 določa metodo za kakovostno ovrednotenje sprijemnosti keramičnih prevlek debeline do 20 µm z vtiskanjem z Rockwellovo diamantno preskusno konico. Nastanek razpok po vtiskanju lahko razkriva tudi kohezivno napako. Vtiskanje se izvede z Rockwellovim instrumentom za preskušanje trdote.
Opisana metoda je lahko primerna tudi za ovrednotenje sprijemnosti kovinskih prevlek.
Preskus ni primeren za elastične prevleke na trdih substratih.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 26443:2024
01-januar-2024
Fina keramika (sodobna keramika, sodobna tehnična keramika) - Preskus z
vtiskanjem po Rockwellu za ovrednotenje sprijemnosti keramičnih prevlek (ISO
26443:2023)
Fine ceramics (advanced ceramics, advanced technical ceramics) - Rockwell indentation
test for evaluation of adhesion of ceramic coatings (ISO 26443:2023)
Hochleistungskeramik - Rockwell-Eindringprüfung zur Bewertung der Haftung von
keramischen Schichten (ISO 26443:2023)
Céramiques techniques - Évaluation de l'adhérence des revêtements céramiques par
l'essai de pénétration Rockwell (ISO 26443:2023)
Ta slovenski standard je istoveten z: EN ISO 26443:2023
ICS:
25.220.99 Druge obdelave in prevleke Other treatments and
coatings
81.060.30 Sodobna keramika Advanced ceramics
SIST EN ISO 26443:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 26443:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 26443:2024
EN ISO 26443
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2023
EUROPÄISCHE NORM
ICS 81.060.30 Supersedes EN ISO 26443:2016
English Version
Fine ceramics (advanced ceramics, advanced technical
ceramics) - Rockwell indentation test for evaluation of
adhesion of ceramic coatings (ISO 26443:2023)
Céramiques techniques - Évaluation de l'adhérence des Hochleistungskeramik - Rockwell-Eindringprüfung zur
revêtements céramiques par l'essai de pénétration Bewertung der Haftung von keramischen Schichten
Rockwell (ISO 26443:2023) (ISO 26443:2023)
This European Standard was approved by CEN on 29 September 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 26443:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 26443:2024
EN ISO 26443:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 26443:2024
EN ISO 26443:2023 (E)
European foreword
This document (EN ISO 26443:2023) has been prepared by Technical Committee ISO/TC 206 "Fine
ceramics" in collaboration with Technical Committee CEN/TC 184 “Advanced technical ceramics” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2024, and conflicting national standards shall be
withdrawn at the latest by May 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 26443:2016.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom
...
SLOVENSKI STANDARD
oSIST prEN ISO 26443:2023
01-september-2023
Fina keramika (sodobna keramika, sodobna tehnična keramika) - Preskus z
vtiskanjem po Rockwellu za ovrednotenje sprijemnosti keramičnih prevlek
(ISO/FDIS 26443:2023)
Fine ceramics (advanced ceramics, advanced technical ceramics) - Rockwell indentation
test for evaluation of adhesion of ceramic coatings (ISO/FDIS 26443:2023)
Hochleistungskeramik - Rockwell-Eindringprüfung zur Bewertung der Haftung von
keramischen Schichten (ISO/FDIS 26443:2023)
Céramiques techniques - Évaluation de l'adhérence des revêtements céramiques par
l'essai de pénétration Rockwell (ISO/FDIS 26443:2023)
Ta slovenski standard je istoveten z: prEN ISO 26443
ICS:
25.220.99 Druge obdelave in prevleke Other treatments and
coatings
81.060.30 Sodobna keramika Advanced ceramics
oSIST prEN ISO 26443:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 26443:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 26443:2023
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 26443
ISO/TC 206
Fine ceramics (advanced ceramics,
Secretariat: JISC
advanced technical ceramics) —
Voting begins on:
2023-06-05 Rockwell indentation test for
evaluation of adhesion of ceramic
Voting terminates on:
2023-08-28
coatings
Céramiques techniques — Évaluation de l'adhérence des revêtements
céramiques par l'essai de pénétration Rockwell
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 26443:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 26443:2023
ISO/FDIS 26443:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 26443
ISO/TC 206
Fine ceramics (advanced ceramics,
Secretariat: JISC
advanced technical ceramics) —
Voting begins on:
Rockwell indentation test for
evaluation of adhesion of ceramic
Voting terminates on:
coatings
Céramiques techniques — Évaluation de l'adhérence des revêtements
céramiques par l'essai de pénétration Rockwell
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
ISO/CEN PARALLEL PROCESSING
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
ISO/FDIS 26443:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
© ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 4 ----------------------
oSIST prEN ISO 26443:2023
ISO/FDIS 26443:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.