Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery

This document specifies the technical conditions for inspection and delivery of wrought aluminium and aluminium alloy foil. The gauge range covered is 6 ?m to 200 ?m.
It does not apply to lacquered, painted, embossed or laminated products.

Aluminium und Aluminiumlegierungen - Folien - Teil 1: Technische Lieferbedingungen

Diese Europäische Norm legt die Technischen Lieferbedingungen für Folien aus Aluminium und Aluminium-Knetlegierungen fest. Sie gilt für einen Dickenbereich von 6 µm bis 200 µm.
Sie gilt nicht für lackierte, gefärbte, geprägte oder kaschierte Erzeugnisse.
ANMERKUNG   Einige in der vorliegenden Norm aufgeführte Erzeugnisse können Gegenstand eines Patents oder von Patentanmeldungen sein. Ihre Auflistung in dieser Norm bedeutet aber keinesfalls, dass dadurch eine Lizenzübertragung unter diesem Patentrecht erfolgt.
CEN/TC 132 bekräftigt seine Vorgehensweise, dass in dem Fall, wenn ein Patentinhaber sich weigert, für genormte Erzeugnisse Lizenzen unter angemessenen und nicht diskriminierenden Bedingungen zu erteilen, dieses Erzeugnis aus der entsprechenden Norm entfernt werden muss.

Aluminium et alliages d'aluminium - Feuille mince - Partie 1 : Conditions techniques de contrôle et de livraison

Cette Norme européenne spécifie les conditions techniques de contrôle et de livraison des feuilles minces en aluminium et alliages d'aluminium corroyés. Elle s'applique aux épaisseurs de 6 µm a 200 µm.
Elles ne s'applique pas aux produits vernis, peints, gaufrés ou contre-collés.

Aluminij in aluminijeve zlitine - Folija - 1. del: Tehnični pogoji za prevzem in dobavo

General Information

Status
Published
Publication Date
28-Feb-2007
Withdrawal Date
28-Feb-2007
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Mar-2007
Due Date
01-Mar-2007
Completion Date
01-Mar-2007

RELATIONS

Buy Standard

Standard
SIST EN 546-1:2007
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and deliveryGREDYRAluminium et alliages d'aluminium - Feuille mince - Partie 1 : Conditions techniques de contrôle et de livraisonAluminium und Aluminiumlegierungen - Folien - Teil 1: Technische LieferbedingungenTa slovenski standard je istoveten z:EN 546-1:2006SIST EN 546-1:2007en77.150.10Aluminijski izdelkiAluminium productsICS:SIST EN 546-1:19981DGRPHãþDSLOVENSKI

STANDARDSIST EN 546-1:200701-marec-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 546-1December 2006ICS 77.150.10Supersedes EN 546-1:1996

English VersionAluminium and aluminium alloys - Foil - Part 1: Technicalconditions for inspection and deliveryAluminium et alliages d'aluminium - Feuille mince - Partie 1: Conditions techniques de contrôle et de livraisonAluminium und Aluminiumlegierungen - Folien - Teil 1:Technische LieferbedingungenThis European Standard was approved by CEN on 25 November 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36

B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 546-1:2006: E

EN 546-1:2006 (E) 2 Contents Page Foreword..............................................................................................................................................................3 1 Scope......................................................................................................................................................4 2 Normative references............................................................................................................................4 3 Terms and definitions...........................................................................................................................4 4 Ordering information.............................................................................................................................5 5 Requirements.........................................................................................................................................5 5.1 Production and manufacturing processes.........................................................................................5 5.2 Quality control........................................................................................................................................6 5.3 Chemical composition..........................................................................................................................6 5.4 Mechanical properties...........................................................................................................................6 5.5 Freedom from defects...........................................................................................................................6 5.6 Tolerances on dimensions...................................................................................................................6 5.7 Special properties..................................................................................................................................6 6 Test procedure.......................................................................................................................................6 6.1 Sampling.................................................................................................................................................6 6.2 Methods of testing.................................................................................................................................8 6.3 Retests....................................................................................................................................................8 7 Conformity with standards...................................................................................................................9 8 Marking of products..............................................................................................................................9 9 Packaging...............................................................................................................................................9 10 Complaints of non-conformity.............................................................................................................9 Bibliography......................................................................................................................................................10

EN 546-1:2006 (E) 3 Foreword This document (EN 546-1:2006) has been prepared by Technical Committee CEN/TC 132 “Aluminium and aluminium alloys”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at the latest by June 2007. This document supersedes EN 546-1:1996. Within its programme of work, Technical Committee CEN/TC 132 entrusted CEN/TC 132/WG 6 "Foil and finstock" to revise EN 546-1:1996. The following modifications have been made:  Clause 3: deletion of subclauses 3.1 to 3.6. Reference to EN 12258-1, and definition of converter foil, consumer/household foil and container foil added;  Clause 4: title is changed, and wording is clarified;  subclauses 5.2, 6.1.1 and 6.2.1: text amended. EN 546 comprises the following parts under the general title "Aluminium and aluminium alloys – Foil":  Part 1: Technical conditions for inspection and delivery  Part 2: Mechanical properties  Part 3: Tolerances on dimensions  Part 4: Special property requirements Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. CEN/TC 132 affirms it is its policy that in the case when a patentee refuses to grant licenses on standardised standard products under reasonable and not discriminatory conditions, then this product shall be removed from the corresponding standard. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EN 546-1:2006 (E) 4 1 Scope This document specifies the technical conditions for inspection and delivery of wrought aluminium and aluminium alloy foil. The gauge range covered is 6 µm to 200 µm. It does not apply to lacquered, painted, embossed or laminated products. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 515, Aluminium and aluminium alloys — Wrought products — Temper designations EN 546-2, Aluminium and aluminium alloys — Foil —Part 2: Mechanical properties EN 546-3, Aluminium and aluminium alloys — Foil — Part 3: Tolerances on dimensions EN 546-4, Aluminium and aluminium alloys — Foil — Part 4: Special property requirements EN 573-3, Aluminium and aluminium alloys — Chemical composition and form of wrought products — Part 3: Chemical composition EN 12258-1:1998, Aluminium and aluminium alloys — Terms and definitions — Part 1: General terms EN 14242, Aluminium and aluminium alloys — Chemical analysis — Inductively coupled plasma optical emission spectral analysis EN 14361, Aluminium and aluminium alloys — Chemical analysis — Sampling from metal melts 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 12258-1:1998 and the following apply. 3.1 converter foil rolled aluminium in the gauge range of 6 µm to 200 µm, produced either by double rolling or single rolling, typically soft annealed and supplied for further processing such as lacquering or laminating 3.2 consumer/household foil foil in the gauge range of 10 µm to 24 µm, intended for general use, principally for use in culinary applications such as cooking and storage 3.3 container foil single rolled material in the gauge range 35 µm to 200 µm, produced at soft or intermediate temper and often involving alloys of the 3xxx and 8xxx series. The foil can be coloured/printed, and is usually supplied lubricated for press forming into smooth or wrinkled walled containers for foodstuffs and the like

EN 546-1:2006 (E) 5 4 Ordering information The order shall specify the product required and shall contain the following information : a) description of the product:  type of converting and intended use;  alloy designation;  form of the product, i.e. single-rolled or double-rolled; b) temper designation of the material to be delivered as defined in EN 515; c) number of this European Standard EN 546-1, or separate specification, if any; d) dimensions of the product: 

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.