SIST EN ISO 9902-1:2002/A1:2009

Textile machinery - Noise test code - Part 1: Common requirements - Amendment 1 (ISO 9902-1:2001/Amd 1:2009)

This standard specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration and verification of the basic noise emission quantities of groups of textile machinery. It specifies noise measurement methods, mounting and operation conditions that shall be used for the test.

Textilmaschinen - Geräuschmessverfahren - Teil 1: Gemeinsame Anforderungen - Änderung 1 (ISO 9902-1:2001/Amd 1:2009)

Matériel pour l'industrie textile - Code d'essai acoustique - Partie 1: Exigences communes - Amendement 1 (ISO 9902-1:2001/Amd 1:2009)

Tekstilni stroji - Postopki za merjenje hrupa - 1. del: Splošne zahteve - Dopolnilo 1 (ISO 9902-1:2001/Amd 1:2009)

Ta standard določa vse informacije, potrebne za učinkovito izvajanje določanja, deklariranja in preverjanja osnovnega obsega emisij hrupa skupin tekstilnih strojev pod standardiziranimi pogoji. Določa preskusne postopke za merjenje hrupa, zahteve za priključitev in delovanje, ki se uporabljajo za preskus.

General Information

• Status: Published
• Public Enquiry End Date: 14-Nov-2008
• Publication Date: 03-May-2009
• ICS: 17.140.20 - Noise emitted by machines and equipment
• ICS: 59.120.01 - Textile machinery in general
• Technical Committee: VSN - Safety of machinery
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 17-Apr-2009
• Due Date: 22-Jun-2009
• Completion Date: 04-May-2009
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Mandate: M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
• Ref Project: EN ISO 9902-1:2001/A1:2009 - Textile machinery - Noise test code - Part 1: Common requirements - Amendment 1 (ISO 9902-1:2001/Amd 1:2009)

Relations

• Amends: SIST EN ISO 9902-1:2002 - Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001)
• Effective Date: 02-Oct-2008

Overview

SIST EN ISO 9902-1:2002/A1:2009 is an amendment to the international standard ISO 9902-1:2001 concerning noise testing procedures for textile machinery. Published by CEN (European Committee for Standardization), this amendment updates the common requirements for noise measurement in textile machinery to align with current technological and regulatory standards.

This standard forms a crucial part of the ISO 9902 series and supports compliance with essential safety and environmental requirements stipulated by European directives such as the Machinery Directive 2006/42/EC. It provides a harmonized noise test code ensuring consistent evaluation of airborne noise emissions from textile machinery and related equipment.

Key Topics

• Noise Test Code for Textile Machinery
  The standard specifies common requirements for measuring noise emissions, including methods and guidelines to produce reproducible and comparable noise test results.

• Adaptation to Updated References
  SIST EN ISO 9902-1:2002/A1:2009 revises and updates normative references by removing publication years and replacing outdated standards (e.g., EN 292-2 replaced by ISO 12100-2 on machinery safety principles).

• Scope Extension
  The amendment clarifies applicability to all textile machinery, plants, and equipment as defined in ISO 11111 parts 1 to 7, supporting a comprehensive coverage across the textile manufacturing sector.

• Noise Measurement Parameters
  Terms such as A-weighted sound power level and emission sound pressure level are defined and adapted referencing the latest ISO noise measurement standards (e.g., ISO 3740 series).

• Declaration of Noise Emissions
  Updated requirements emphasize that airborne noise emission information must accompany machinery documentation following ISO 12100-2, facilitating transparent communication for manufacturers and users.

• Compliance with European Directives
  The amendment includes informative annexes detailing the relationship between this standard and EU Directives (2006/42/EC and 98/37/EC), offering machinery manufacturers presumption of conformity when adhering to this standard.

Applications

• Textile Machinery Manufacturers
  Use SIST EN ISO 9902-1:2002/A1:2009 to conduct standardized noise testing for product development, certification, and regulatory compliance.

• Quality and Safety Inspectors
  Apply the noise test code to assess machinery noise emissions on production lines and in operational environments, ensuring worker safety and environmental standards.

• Regulatory Authorities
  Reference this amendment when enforcing noise emission limits and verifying conformity with European safety directives concerning textile machinery.

• Environmental and Occupational Health Specialists
  Utilize the noise measurement methods to evaluate noise pollution in textile plants and recommend mitigation strategies.

Related Standards

• ISO 9902 Series
  Parts 1 to 7 cover noise test codes for various textile machinery types and specific noise emission measurement protocols.

• ISO 11111 Series
  Defines types and classifications of textile machinery and equipment, referenced here for scope inclusion.

• ISO 3740 Series
  Provides foundational methods for determining sound power levels of noise sources.

• ISO 12100-2
  Specifies safety design principles applicable to machinery, supporting the safe operation of textile equipment.

• European Directives 2006/42/EC and 98/37/EC
  Machinery safety directives supported by this standard, enabling compliance and CE marking.

---

Keywords: EN ISO 9902-1 amendment, textile machinery noise testing, noise emission measurement, ISO 9902-1:2001/A1:2009, machinery noise standards, European Machinery Directive, textile equipment noise code, airborne noise emissions, machinery safety compliance

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2009
Tekstilni stroji - Postopki za merjenje hrupa - 1. del: Splošne zahteve - Dopolnilo 1
(ISO 9902-1:2001/Amd 1:2009)
Textile machinery - Noise test code - Part 1: Common requirements - Amendment 1 (ISO
9902-1:2001/Amd 1:2009)
Textilmaschinen - Geräuschmessverfahren - Teil 1: Gemeinsame Anforderungen -
Änderung 1 (ISO 9902-1:2001/Amd 1:2009)
Matériel pour l'industrie textile - Code d'essai acoustique - Partie 1: Exigences
communes - Amendement 1 (ISO 9902-1:2001/Amd 1:2009)
Ta slovenski standard je istoveten z: EN ISO 9902-1:2001/A1:2009
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
59.120.01 Tekstilni stroji na splošno Textile machinery in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 9902-1:2001/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2009
ICS 17.140.20; 59.120.01
English Version
Textile machinery - Noise test code - Part 1: Common
requirements - Amendment 1 (ISO 9902-1:2001/Amd 1:2009)
Matériel pour l'industrie textile - Code d'essai acoustique - Textilmaschinen - Geräuschmessverfahren - Teil 1:
Partie 1: Exigences communes - Amendement 1 (ISO Gemeinsame Anforderungen - Änderung 1 (ISO 9902-
9902-1:2001/Amd 1:2009) 1:2001/Amd 1:2009)
This amendment A1 modifies the European Standard EN ISO 9902-1:2001; it was approved by CEN on 12 March 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9902-1:2001/A1:2009: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 9902-1:2001/A1:2009) has been prepared by Technical Committee ISO/TC 72
"Textile machinery and machinery for dry-cleaning and industrial laundering" in collaboration with Technical
Committee CEN/TC 214 "Textile machinery and accessories", the secretariat of which is held by SNV.
This Amendment to the European Standard EN ISO 9902-1:2001 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and
conflicting national standards shall be withdrawn at the latest by September 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 9902-1:2001/Amd1:2009 has been approved by CEN as a EN ISO 9902-1:2001/A1:2009
without any modification.
INTERNATIONAL ISO
STANDARD 9902-1
First edition
2001-03-15
AMENDMENT 1
2009-03-15
Textile machinery — Noise test code —
Part 1:
Common requirements
AMENDMENT 1
Matériel pour l'industrie textile — Code d'essai acoustique —
Partie 1: Exigences communes
AMENDEMENT 1
Reference number
ISO 9902-1:2001/Amd.1:2009(E)
©
ISO 2009
SIST EN ISO 9902-1:2002/A
...

SLOVENSKI STANDARD
SIST EN ISO 9902-1:2002/oprA1:2008
01-november-2008
Tekstilni stroji - Postopki za merjenje hrupa - 1. del: Splošne zahteve - Dopolnilo 1
(ISO 9902-1:2001/DAM 1:2008)
Textile machinery - Noise test code - Part 1: Common requirements - Amendment 1 (ISO
9902-1:2001/DAM 1:2008)
Textilmaschinen - Geräuschmessverfahren - Teil 1: Gemeinsame Anforderungen -
Änderung 1 (ISO 9902-1:2001/DAM 1:2008)
Matériel pour l'industrie textile - Code d'essai acoustique - Partie 1: Exigences
communes - Amendement 1 (ISO 9902-1:2001/DAM 1:2008)
Ta slovenski standard je istoveten z: EN ISO 9902-1:2001/prA1
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
59.120.01 Tekstilni stroji na splošno Textile machinery in general
SIST EN ISO 9902-1:2002/oprA1:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN ISO 9902-1:2002/oprA1:2008

SIST EN ISO 9902-1:2002/oprA1:2008
EUROPEAN STANDARD
DRAFT
EN ISO 9902-1:2001
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
May 2008
ICS 17.140.20; 59.120.01
English Version
Textile machinery - Noise test code - Part 1: Common
requirements - Amendment 1 (ISO 9902-1:2001/DAM 1:2008)
Matériel pour l'industrie textile - Code d'essai acoustique - Textilmaschinen - Geräuschmessverfahren - Teil 1:
Partie 1: Exigences communes - Amendement 1 (ISO Gemeinsame Anforderungen - Änderung 1 (ISO 9902-
9902-1:2001/DAM 1:2008) 1:2001/DAM 1:2008)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 214.
This draft amendment A1, if approved, will modify the European Standard EN ISO 9902-1:2001. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9902-1:2001/prA1:2008: E
worldwide for CEN national Members.

SIST EN ISO 9902-1:2002/oprA1:2008
EN ISO 9902-1:2001/prA1:2008 (E)
Contents Page
Foreword.3

SIST EN ISO 9902-1:2002/oprA1:2008
EN ISO 9902-1:2001/prA1:2008 (E)
Foreword
This document (EN ISO 9902-1:2001/prA1:2008) has been prepared by Technical Committee ISO/TC 72
"Textile machinery and machinery for dry-cleaning and industrial laundering" in collaboration with Technical
Committee CEN/TC 214 “Textile machinery and accessories” the secretariat of which is held by SNV.
This document is currently submitted to the parallel Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
Endorsement notice
The text of ISO 9902-1:2001/DAM 1:2008 has been approved by CEN as a EN ISO 9902-1:2001/prA1:2008
without any modification.
SIST EN ISO 9902-1:2002/oprA1:2008

SIST EN ISO 9902-1:2002/oprA1:2008
DRAFT AMENDMENT ISO 9902-1:2001/DAmd 1
ISO/TC 72/SC 8 Secretariat: DIN
Voting begins on: Voting terminates on:
2008-05-08 2008-10-08
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Textile machinery — Noise test code —
Part 1:
Common requirements
AMENDMENT 1
Matériel pour l'industrie textile — Code d'essai acoustique —
Partie 1: Exigences communes
AMENDEMENT 1
ICS 17.140.20; 59.120.01
ISO/CEN PARALLEL ENQUIRY
The CEN Secretary-General has advised the ISO Secretary-General that this ISO/DIS covers a subject
of interest to European standardization. In accordance with the ISO-lead mode of collaboration as
defined in the Vienna Agreement, consultation on this ISO/DIS has the same effect for CEN
members as would a CEN enquiry on a draft European Standard. Should this draft be accepted, a
final draft, established on the basis of comments received, will be submitted to a parallel two-month FDIS
vote in ISO and formal vote in CEN.
In accordance with the provisions of Council Resolution 15/1993 this document is circulated in
the English language only.
Conformément aux dispositions de la Résolution du Conseil 15/1993, ce document est distribué
en version anglaise seulement.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©
International Organization for Standardization, 2008

SIST EN ISO 9902-1:2002/oprA1:2008
ISO 9902-1:2001/DAmd 1
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
Th
...