SIST ETS 300 133-6 E2:2003

• Abstract:

  Revision of ETS 300 133 in consideration of change requests received by RES 4.

• Status: Published
• Publication Date: 30-Nov-2003
• Withdrawal Date: 30-Sep-2003
• ICS: 33.070.20 - Paging systems
• ICS: 33.100.01 - Electromagnetic compatibility in general
• Technical Committee: RES - Radio equipment and systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2003
• Due Date: 01-Dec-2003
• Completion Date: 01-Dec-2003
• Ref Project: ETSI ETS 300 133-6 ed.2 (1997-11) - ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Enhanced Radio MEssage System (ERMES); Part 6: Base station conformance specification

Overview

SIST ETS 300 133-6 E2:2003 is a Slovenian national adoption of the European standard ETS 300 133-6 Edition 2, developed under the framework of the European Telecommunications Standards Institute (ETSI). The standard focuses on Electromagnetic Compatibility and Radio Spectrum Matters (ERM), specifically addressing the Enhanced Radio MEssage System (ERMES) and detailing the Base Station conformance specification. This document is an essential reference for ensuring uniform technical requirements and test methods for base stations within the ERMES paging system, supporting reliable and compatible telecommunications infrastructure across Europe.

Key Topics

• Base Station Requirements: Defines the physical and functional characteristics required for ERMES base stations, including transmitter specifications, control, and timing equipment.
• Radio Frequency (RF) Parameters: Specifies the modulation technique (4-level Pulse Amplitude Modulated/Frequency Modulation or 4-PAM/FM), frequency tolerances, symbol rates, and in-channel RF spectrum masks for signal compliance.
• Testing Procedures: Outlines standardized test setups and methods for validating symbol transition shaping, RF spectrum, frequency accuracy, and symbol rates under defined operating conditions.
• Interface Definitions: Details the primary interfaces (I1 and optional I2) used for base station communication with both paging receivers and network controllers, supporting service, control, and operational data exchange.
• Revision Scope: This edition incorporates feedback from change requests coordinated by RES 4 and aligns with other relevant ERMES standards to maintain up-to-date and interoperable system requirements.

Applications

The standard plays a vital role in the practical deployment and maintenance of paging networks and other critical radio messaging applications, offering value in several domains:

• Paging System Manufacturers: Ensures that all ERMES base stations meet uniform technical criteria for seamless compatibility across products from different vendors.
• Network Operators: Guides the installation and testing processes, supporting reliable operation, interoperability, and regulatory compliance for public and private paging networks.
• Testing Laboratories: Provides detailed test methods and measurement guidelines for certifying base station conformance, simplifying the certification process.
• Regulatory Authorities: Assists in the formulation and enforcement of national and European policies for electromagnetic compatibility and optimal usage of the radio spectrum.

By adhering to this standard, organizations can guarantee that base stations will function harmoniously within the broader ERMES ecosystem, reducing the risk of interference and technical issues.

Related Standards

Compliance with SIST ETS 300 133-6 E2:2003 often requires reference to additional related standards within the ERMES suite and other telecommunications regulations. Key related standards include:

• ETS 300 133-3: Network aspects for ERMES systems.
• ETS 300 133-4: Air interface specification, including modulation and data transmission protocols.
• ETS 300 133-7: Operation and maintenance aspects for ERMES.
• ETS 300 113: Technical characteristics and test conditions for land mobile radio equipment intended for data and speech transmission.

Referencing these standards ensures a comprehensive approach to implementing, testing, and maintaining ERMES base stations within the scope of electromagnetic compatibility and radio spectrum management.

---

Keywords: ERMES, base station conformance, electromagnetic compatibility, radio spectrum matters, paging system, SIST ETS 300 133-6 E2:2003, 4-PAM/FM modulation, telecommunications standards, RF testing, European Telecommunications Standards Institute, radio messaging, network interoperability.

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Enhanced Radio MEssage System (ERMES); Part 6: Base station conformance specification33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.070.20Sistem za osebni klicPaging systemsICS:Ta slovenski standard je istoveten z:ETS 300 133-6 Edition 2SIST ETS 300 133-6 E2:2003en01-december-2003SIST ETS 300 133-6 E2:2003SLOVENSKI
STANDARD
EUROPEAN ETS 300 133-6TELECOMMUNICATION November 1997STANDARD Second EditionSource: ERM Reference: RE/ERM-RP04-007-6ICS:33.020Key words:Base station, ERMES, paging, radioElectromagnetic compatibilityand Radio spectrum Matters (ERM);Enhanced Radio MEssage System (ERMES);Part 6: Base station conformance specificationETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [e-mail].: [phone] - Fax: [phone]Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1997. All rights reserved.SIST ETS 300 133-6 E2:2003

Page 2ETS 300 133-6: November 1997Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 133-6 E2:2003

Page 3ETS 300 133-6: November 1997ContentsForeword.5Intellectual Property Rights.51Scope.72Normative references.73Definitions and abbreviations.73.1Definitions.73.2Abbreviations.74Base Station (BS) description.85RF requirements.85.1General.85.1.1Extreme test conditions.85.2Modulation.85.2.1Symbol transition shaping.85.2.2In-channel RF spectrum.85.3Frequency tolerances.95.4Symbol rate.96Test methods.96.1General.96.2Modulation.96.2.1Symbol transition shaping.96.2.2RF spectrum.96.3Frequency tolerances.106.3.1Centre frequency.106.3.2Symbol frequency.106.4Symbol rate.10History.11SIST ETS 300 133-6 E2:2003

Page 4ETS 300 133-6: November 1997Blank pageSIST ETS 300 133-6 E2:2003

Page 5ETS 300 133-6: November 1997ForewordThis second edition European Telecommunication Standard (ETS) has been produced by theElectromagnetic compatibility and Radio spectrum Matters (ERM) Technical Committee of the EuropeanTelecommunications Standards Institute (ETSI).This ETS comprises seven parts with the generic title "Electromagnetic compatibility and Radio spectrumMatters (ERM); Enhanced Radio MEssage System (ERMES)". The title of each part is listed below:Part 1:"General aspects";Part 2:"Service aspects";Part 3:"Network aspects";Part 4:"Air interface specification";Part 5:"Receiver conformance specification";Part 6:"Base station conformance specification";Part 7:"Operation and maintenance aspects".This part, ETS 300 133-6, gives the Enhanced Radio MEssage System (ERMES) base stationconformance specification and includes the technical characteristics of the transmitters.Transposition datesDate of adoption:7 November 1997Date of latest announcement of this ETS (doa):28 February 1998Date of latest publication of new National Standardor endorsement of this ETS (dop/e):31 August 1998Date of withdrawal of any conflicting National Standard (dow):31 August 1998Intellectual Property RightsIPRs essential or potentially essential to this ETS may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, andcan be found in ETR 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRsnotified to ETSI in respect of ETSI standards", which is available free of charge from the ETSISecretariat. Latest updates are available on the ETSI Web server (http://www.etsi.fr/ipr).Pursuant to the ETSI Interim IPR Policy, no investigation, including IPR searches, has been carried out byETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETR 314 (or theupdates on http://www.etsi.fr/ipr) which are, or may be, or may become, essential to this ETS.SIST ETS 300 133-6 E2:2003

Page 6ETS 300 133-6: November 1997Blank pageSIST ETS 300 133-6 E2:2003

Page 7ETS 300 133-6: November 19971ScopeThis European Telecommunication Standard (ETS) defines the requirements for base stations operatingon the Enhanced Radio Message System (ERMES). A general description of the base station is given anddetailed Radio Frequency (RF) characteristics defined.2Normative referencesThis ETS incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references subsequent amendments to, or revisions of any of thes
...