Railway applications - Infrastructure - Mechanical requirements for joints in running rails

This European Standard deals with mechanical rail joints for flat bottom rails 46 kg/m and over.
The scope of this standard is:
-   to establish requirements for insulated and non-insulated rail joints, for stressed rail (continuous welded rail, CWR) and unstressed rail (jointed track);
-   to define mechanical and electrical requirements for type approval and for acceptance of insulated rail joints which are manufactured in a factory (prefab construction) as well as assembled on-site (site construction).
This standard specifies the minimum requirements. Special applications as for instance tram systems may require different demands in certain paragraphs and should be agreed between customer and supplier.
The scope also excludes expansion joints (it is covered in EN 13232-8), and special joints in switch constructions.

Bahnanwendungen - Infrastruktur - Mechanische Anforderungen an Fahrschienenstöße

Diese Europäische Norm behandelt mechanische Schienenstöße für Vignolschienen ab 46 kg/m.
Diese Norm hat folgenden Anwendungsbereich:
-   Festlegung der Anforderungen an Isolierstöße und unisolierte Schienenstöße von belasteten Schienen (durchgehend verschweißte Schienen (CWR)) und unbelasteten Schienen (verschraubte Schienen);
-   Festlegung der mechanischen und elektrischen Anforderungen an die Typprüfung und Annahme von Isolierstößen, die in einem Werk hergestellt werden (vorgefertigte Herstellung) und von Isolierstößen, die vor Ort zusammengebaut werden (Vor-Ort-Herstellung).
Diese Norm legt die Mindestanforderungen fest. Für besondere Anwendungen, wie z. B. Straßenbahnsysteme, können bezüglich bestimmter Abschnitte andere Anforderungen gelten, die zwischen Verbraucher und Lieferant zu vereinbaren sind.
Vom Anwendungsbereich ausgenommen sind auch Auszugsvorichtungen (die in EN 13232-8 behandelt werden) und besondere Stöße in Weichenkonstruktionen.

Applications ferroviaires - Infrastructures - Exigences mécaniques des joints dans les rails de roulement

La présente Norme européenne traite des joints mécaniques pour rails Vignole de masse supérieure ou égale à 46 kg/m.
Le domaine d’application de la présente Norme est le suivant :
-   établir les exigences relatives aux joints isolés et non isolés, pour les rails avec contraintes (longs rails soudés, LRS) et les rails sans contraintes (voie avec joints) ;
-   définir les exigences mécaniques et électriques relatives à l’homologation et à l’acceptation des joints isolés fabriqués en usine (construction préfabriquée) et installés sur le chantier (construction sur site).
La présente norme définit les exigences minimales. Les applications spéciales telles, par exemple, que les systèmes de tramway peuvent exiger des demandes différentes dans certains paragraphes et doivent être convenues entre le client et le fournisseur.
Le domaine d’application exclut également les joints de dilatation (ce point est couvert par l’EN 13232-8), ainsi que les joints spéciaux dans les constructions d’aiguillages.

Železniške naprave - Infrastruktura - Mehanske zahteve za spoje v voznih tirnicah

General Information

Status
Not Published
Public Enquiry End Date
09-Jul-2015
Technical Committee
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
18-Dec-2019
Due Date
23-Dec-2019
Completion Date
18-Dec-2019

Buy Standard

Draft
prEN 16843:2015
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 16843:2015
01-junij-2015
Železniške naprave - Infrastruktura - Mehanske zahteve za spoje v voznih tirnicah
Railway applications - Infrastructure - Mechanical requirements for joints in running rails
Bahnanwendungen - Infrastruktur - Mechanische Anforderungen an Fahrschienenstöße
Applications ferroviaires - Infrastructures - Exigences mécaniques des joints dans les
rails de roulement
Ta slovenski standard je istoveten z: prEN 16843
ICS:
45.080 7UDþQLFHLQåHOH]QLãNLGHOL Rails and railway
components
93.100 Gradnja železnic Construction of railways
oSIST prEN 16843:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16843:2015

---------------------- Page: 2 ----------------------
oSIST prEN 16843:2015

EUROPEAN STANDARD
DRAFT
prEN 16843
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2015
ICS 93.100
English Version
Railway applications - Infrastructure - Mechanical requirements
for joints in running rails
Applications ferroviaires - Infrastructures - Exigences Bahnanwendungen - Infrastruktur - Mechanische
mécaniques des joints dans les rails de roulement Anforderungen an Fahrschienenstöße
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16843:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 16843:2015
prEN 16843:2015 (E)
Contents Page
Foreword .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Symbols and abbreviations .8
5 Requirements .9
5.1 Quality systems .9
5.1.1 General .9
5.1.2 Design requirements for mechanical rail joints – General .9
5.1.3 Joint clearance capacity for jointed track .9
5.1.4 Maximum rail length for jointed track . 10
5.1.5 Design approval .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.