SIST EN 1240:2011
(Main)Adhesives - Determination of hydroxyl value and/or hydroxyl content
Adhesives - Determination of hydroxyl value and/or hydroxyl content
This European Standard specifies a method to determine the hydroxyl value and/or the hydroxyl content of adhesives, adhesive components, their basic constituents and related products. This method can also be used to determine the hydroxyl value and/or the hydroxyl content of surface protection systems of concrete.
Klebstoffe - Bestimmung der Hydroxylzahl und/oder des Hydroxylgehaltes
La présente Norme européenne spécifie une méthode de détermination de la valeur hydroxyle et/ou de la teneur en hydroxyle des adhésifs, des composants d'adhésifs, de leurs constituants de base et des produits connexes. Cette méthode peut également être utilisée pour déterminer la valeur hydroxyle et/ou la teneur en hydroxyle des systèmes de protection de surface du béton.
Adhésifs - Détermination de la valeur hydroxyle et/ou de la teneur en hydroxyle
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Hydroxylzahl und/oder des Hydroxylgehaltes von Klebstoffen, Klebstoff-Komponenten, ihren Grundbestandteilen sowie verwandter Produkte fest. Dieses Verfahren kann auch zur Bestimmung der Hydroxylzahl und/oder des Hydroxylgehaltes von Beton-oberflächenschutzsystemen verwendet werden.
Lepila - Določevanje hidroksilnega števila in/ali hidroksilnih skupin
Ta evropski standard opredeljuje metodo za določevanje hidroksilnega števila in/ali hidroksilnih skupin lepil, komponent lepil, njihovih osnovnih sestavin in sorodnih proizvodov. Ta metoda se lahko uporablja tudi za določevanje hidroksilnega števila in/ali hidroksilnih skupin betonskih sistemov za površinsko zaščito.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.XSLQKlebstoffe - Bestimmung der Hydroxylzahl und/oder des HydroxylgehaltesAdhésifs - Détermination de la valeur hydroxyle et/ou de la teneur en hydroxyleAdhesives - Determination of hydroxyl value and/or hydroxyl content83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 1240:2011SIST EN 1240:2011en,fr,de01-november-2011SIST EN 1240:2011SLOVENSKI
STANDARDSIST EN 1240:19991DGRPHãþD
SIST EN 1240:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1240
April 2011 ICS 83.180 Supersedes EN 1240:1998English Version
Adhesives - Determination of hydroxyl value and/or hydroxyl content
Adhésifs - Détermination de la valeur hydroxyle et/ou de la teneur en hydroxyle
Klebstoffe - Bestimmung der Hydroxylzahl und/oder des Hydroxylgehaltes This European Standard was approved by CEN on 10 March 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1240:2011: ESIST EN 1240:2011
EN 1240:2011 (E)
2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .44Principles .45Reagents .56Apparatus .57Procedures .58Expression of results .69Test report .7 SIST EN 1240:2011
EN 1240:2011 (E)
3 Foreword This document (EN 1240:2011) has been prepared by Technical Committee CEN/TC 193 “Adhesives”, the secretariat of which is held by AENOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at the latest by October 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1240:1998. The main modifications regarding the previous version are in the Foreword, Normative References and 6.5. SAFETY STATEMENT— Persons using this document should be familiar with the normal laboratory practice, if applicable. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. ENVIRONMENTAL STATEMENT — It is understood that some of the material permitted in this standard may have negative environmental impact. As technological advantages lead to acceptable alternatives for these materials, they will be eliminated from this standard to the extent possible. At the end of the test, the user of the standard should take care to carry out an appropriate disposal of the wastes, according to local regulation. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 1240:2011
EN 1240:2011 (E)
4 1 Scope This European Standard specifies a method to determine the hydroxyl value and/or the hydroxyl content of adhesives, adhesive components, their basic constituents and related products. This method can also be used to determine the hydroxyl value and/or the hydroxyl content of surface protection systems of concrete. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 923:2005+A1:2008, Adhesives
Terms and definitions EN 1067, Adhesives
Examination and preparation of samples for testing EN 1241, Adhesives
Determination of acid value EN ISO 15528, Paints, varnishes and raw materials for paints and varnishes
Sampling (
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Klebstoffe - Bestimmung der Hydroxylzahl und/oder des HydroxylgehaltesAdhésifs - Détermination de la valeur hydroxyle et/ou de la teneur en hydroxyleAdhesives - Determination of hydroxyl value and/or hydroxyl content83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:FprEN 1240kSIST FprEN 1240:2010en,fr,de01-december-2010kSIST FprEN 1240:2010SLOVENSKI
STANDARD
kSIST FprEN 1240:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 1240
September 2010 ICS 83.180 Will supersede EN 1240:1998English Version
Adhesives - Determination of hydroxyl value and/or hydroxyl content
Adhésifs - Détermination de la valeur hydroxyle et/ou de la teneur en hydroxyle
Klebstoffe - Bestimmung der Hydroxylzahl und/oder des Hydroxylgehaltes This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 193.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 1240:2010: EkSIST FprEN 1240:2010
FprEN 1240:2010 (E)
2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .44Principles .45Reagents .56Apparatus .57Procedures .58Expression of results .69Test report .7 kSIST FprEN 1240:2010
FprEN 1240:2010 (E)
3 Foreword This document (FprEN 1240:2010) has been prepared by Technical Committee CEN/TC 193 “Adhesives”, the secretariat of which is held by AENOR. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 1240:1998. The main modifications regarding the previous version are in the Foreword, Normative References and 6.5. SAFETY STATEMENT— Persons using this document should be familiar with the normal laboratory practice, if applicable. This document does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. ENVIRONMENTAL STATEMENT — It is understood that some of the material permitted in this standard may have negative environmental impact. As technological advantages lead to acceptable alternatives for these materials, they will be eliminated from this standard to the extent possible. At the end of the test, the user of the standard should take care to carry out an appropriate disposal of the wastes, according to local regulation. kSIST FprEN 1240:2010
FprEN 1240:2010 (E)
4 1 Scope This European Standard specifies a method to determine the hydroxyl value and/or the hydroxyl content of adhesives, adhesive components, their basic constituents and related products. This method can also be used to determine the hydroxyl value and/or the hydroxyl content of surface protection systems of concrete. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 923:2005+A1:2008, Adhesives
Terms and definitions EN 1067, Adhesives
Examination and preparation of samples for testing EN 1241, Adhesives
Determination of acid value EN 21512, Paints and varnishes
Sampling of products in liquid or paste form (ISO 1512:1991) EN ISO 1042:1999, Laboratory glassware
One-mark volumetric flasks (ISO 1042:1998) EN ISO 3696:1995, Water for analytical laboratory use
Specification and test methods (ISO 3696:1987) EN ISO 15605, Adhesives Sampling (ISO 15605:2000) ISO 385-1:1984, Laboratory glassware
Burettes
Part 1: General requirements ISO 648:2008, Labora
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.