SIST EN ISO 8849:2018
(Main)Small craft - Electrically operated direct-current bilge pumps (ISO 8849:2003)
Small craft - Electrically operated direct-current bilge pumps (ISO 8849:2003)
This International Standard specifies requirements for electrically operated direct-current bilge pumps
intended for use in removing bilge water from small craft with a hull length up to 24 m. It applies to electrically
operated bilge pumps rated for less than 50 V direct current (d.c.).
This International Standard does not cover pumps intended for damage control.
Kleine Wasserfahrzeuge - Elektrisch angetriebene Gleichstrom- Bilgepumpen (ISO 8849:2003)
Petits navires - Pompes de cale à moteur électrique en courant continu (ISO 8849:2003)
Mala plovila - Električne kalužne črpalke za enosmerno napetost (ISO 8849:2003)
Ta mednarodni standard določa zahteve za električne kalužne črpalke za enosmerno napetost, namenjene za uporabo pri odstranjevanju kalužne vode iz malih plovil z dolžino trupa do 24 m. Uporablja se za električne kalužne črpalke z nazivno napetostjo manj kot 50 V pri enosmernem toku.
Ta mednarodni standard ne zajema črpalk, ki se uporabljajo za obvladovanje poškodb.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 8849:2018
01-december-2018
1DGRPHãþD
SIST EN ISO 8849:2004
0DODSORYLOD(OHNWULþQHNDOXåQHþUSDONH]DHQRVPHUQRQDSHWRVW ,62
Small craft - Electrically operated direct-current bilge pumps (ISO 8849:2003)
Kleine Wasserfahrzeuge - Elektrisch angetriebene Gleichstrom- Bilgepumpen (ISO
8849:2003)
Petits navires - Pompes de cale à moteur électrique en courant continu (ISO 8849:2003)
Ta slovenski standard je istoveten z: EN ISO 8849:2018
ICS:
47.020.60 (OHNWULþQDRSUHPDODGLMLQ Electrical equipment of ships
NRQVWUXNFLMQDPRUMX and of marine structures
47.080 ýROQL Small craft
SIST EN ISO 8849:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 8849:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 8849:2018
EN ISO 8849
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2018
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 8849:2003
English Version
Small craft - Electrically operated direct-current bilge
pumps (ISO 8849:2003)
Petits navires - Pompes de cale à moteur électrique en Kleine Wasserfahrzeuge - Elektrisch angetriebene
courant continu (ISO 8849:2003) Gleichstrom- Bilgepumpen (ISO 8849:2003)
This European Standard was approved by CEN on 16 April 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8849:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 8849:2018
EN ISO 8849:2018 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of Directive 2013/53/EU aimed to be covered . 4
2
---------------------- Page: 4 ----------------------
SIST EN ISO 8849:2018
EN ISO 8849:2018 (E)
European foreword
The text of ISO 8849:2003 has been prepared by Technical Committee ISO/TC 188 “Small craft” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 8849:2018.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2019, and conflicting national standards shall be
withdrawn at the latest by March 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8849:2003.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive 2013/53/EU.
For relationship with EU Directive 2013/53/EU, see informative Annex ZA, which is an integral part of
this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
the United Kingdom.
Endorsement notice
The text of ISO 8849:2003 has been approved by CEN as EN ISO 8849:2018 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 8849:2018
EN ISO 8849:2018 (E)
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of Directive 2013/53/EU aimed to be covered
This European standard has been prepared under a Commission’s standardization request M/542
C(2015) 8736 final to provide one voluntary means of conforming to Essential Requirements of Directive
2013/53/EU.
Once this standard is cited in the Official Journal of the European Union under that Directive, compliance
with the normative clauses of this standard given in Table ZA.1 confers, within the limits of the scope of
this standard, a presumption of conformity with the corresponding Essential Requirements of that
Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Annex I and Annex II of
Directive 2013/53/EU
Essential Requirements of Clause(s)/sub- Remarks/Notes
Directive 2013/53/EU clause(s) of
this EN
Annex I, Part A, 3.5 (c) - Flooding, 4, 6 This International Standard does not cover pumps
removal of water by pumps and intended for damage control.
other means.
Annex I, Part A, 5.3 - Electrical 4, 5, 6 This International Standard does not deal with the
system following elements of this essential requirement;
— Electric shock;
— Interaction with electric propulsion circuits;
Annex I, Part A, 5.6.1 – Fire 4.8, 4.9, 5.5 In respect of preventing a fire hazard.
protection , General
Annex II, Components of 4.2 This standard is relevant in respect of the
Watercraft requirements for ignition protection of electrically
operated D.C. bilge pumps that are suitable for
(1) - Ignition protected
watercraft with inboard or stern drive petrol
equipment for inboard and stern
engines.
drive petrol engines and petrol
tank spaces EN28846 is the European Endorsement of ISO 8846
in respect of ignition protection.
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
4
---------------------- Page: 6 ----------------------
SIST EN ISO 8849:2018
INTERNATIONAL ISO
STANDARD 8849
Second edition
2003-10-01
Small craft — Electrically operated direct-
current bilge pumps
Petits navires — Pompes de cale à moteur électrique en courant
continu
Reference number
ISO 8849:2003(E)
©
ISO 2003
---------------------- Page: 7 ----------------------
SIST EN ISO 8849:2018
ISO 8849:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.or
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.