Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems - Amendment 1 (ISO 19225:2017/Amd 1:2019)

2019-09-17 JF: TC request for the editorial change in Annex ZA to adress the Consultant's comment
2019-03-19 The Enquiry draft of the standard had not been submitted for the assessment. In February, the TC provided a detailed Annex ZA  in line with the general EC request. CCMC requested the missing assessment on 2019-03-19. The indicative deadline to receive it is 2019-04-24.

Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems - Amendment 1 (ISO 19225:2017/Amd 1:2019)

Not available

Machines d'exploitation de mines et carrières souterraines - Machines mobiles d'abattage de front de taille - Exigences de sécurité imposées aux haveuses à tambour(s) et aux rabots - Amendement 1 (ISO 19225:2017/Amd 1:2019)

Stroji za podzemne rudnike - Premični rudarski stroji na odkopu - Varnostne zahteve za valjčne nakladalne stroje in sisteme s plugom - Dopolnilo A1 (ISO 19225:2017/Amd 1:2019)

General Information

Status
Published
Public Enquiry End Date
30-Jan-2019
Publication Date
09-Mar-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
04-Nov-2019
Due Date
09-Jan-2020
Completion Date
10-Mar-2020

Relations

Buy Standard

Amendment
SIST EN ISO 19225:2018/A1:2020 - BARVE
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Amendment
SIST EN ISO 19225:2018/oprA1:2019
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19225:2018/A1:2020
01-april-2020
Stroji za podzemne rudnike - Premični rudarski stroji na odkopu - Varnostne
zahteve za valjčne nakladalne stroje in sisteme s plugom - Dopolnilo A1 (ISO
19225:2017/Amd 1:2019)
Underground mining machines - Mobile extracting machines at the face - Safety
requirements for shearer loaders and plough systems - Amendment 1 (ISO
19225:2017/Amd 1:2019)
Underground mining machines - Mobile extracting machines at the face - Safety
requirements for shearer loaders and plough systems - Amendment 1 (ISO
19225:2017/Amd 1:2019)
Machines d'exploitation de mines et carrières souterraines - Machines mobiles

d'abattage de front de taille - Exigences de sécurité imposées aux haveuses à tambour

(s) et aux rabots - Amendement 1 (ISO 19225:2017/Amd 1:2019)
Ta slovenski standard je istoveten z: EN ISO 19225:2017/A1:2019
ICS:
73.100.30 Oprema za vrtanje in Equipment for drilling and
izkopavanje mine excavation
SIST EN ISO 19225:2018/A1:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 19225:2018/A1:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 19225:2018/A1:2020
EN ISO 19225:2017/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2019
EUROPÄISCHE NORM
ICS 73.100.30
English Version
Underground mining machines - Mobile extracting
machines at the face - Safety requirements for shearer
loaders and plough systems - Amendment 1 (ISO
19225:2017/Amd 1:2019)

Machines d'exploitation de mines et carrières Bergbaumaschinen unter Tage - Mobile

souterraines - Machines mobiles d'abattage de front de Abbaumaschinen im Streb - Sicherheitsanforderungen

taille - Exigences de sécurité imposées aux haveuses à für Walzenlader und Hobelanlagen - Änderung 1 (ISO

tambour(s) et aux rabots - Amendement 1 (ISO 19225:2017/Amd 1:2019)
19225:2017/Amd 1:2019)

This amendment A1 modifies the European Standard EN ISO 19225:2017; it was approved by CEN on 29 September 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of

this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19225:2017/A1:2019 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 19225:2018/A1:2020
EN ISO 19225:2017/A1:2019 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

Annex ZA (informative) Relationship between this European Standard and the essential

requirements of Directive2006/42/EC aimed to be covered ......................................................... 4

---------------------- Page: 4 ----------------------
SIST EN ISO 19225:2018/A1:2020
EN ISO 19225:2017/A1:2019 (E)
European foreword

This document (EN ISO 19225:2017/A1:2019) has been prepared by Technical Committee ISO/TC 82

"Mining" in collaboration with Technical Committee CEN/TC 196 “Mining machinery and equipment -

Safety” the secretariat of which is held by DIN.

This Amendment to the European Standard EN ISO 19225:2017 shall be given the status of a national

standard, either by publication of an identical text or by endorsement, at the latest by April 2020, and

conflicting national standards shall be withdrawn at the latest by April 2020.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a mandate given to CEN by the European Commission and the

European Free Trade Association, and supports essential requirements of EU Directive(s).

For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this

document.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of

North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

United Kingdom.
Endorsement notice

The text of ISO 19225:2017/Amd 1:2019 has been approved by CEN as EN ISO 19225:2017/A1:2019

without any modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 19225:2018/A1:2020
EN ISO 19225:2017/A1:2019 (E)
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Directive2006/42/EC aimed to be covered

This European Standard has been prepared under a Commission’s standardization request M/396

(Machinery) to provide one voluntary means of conforming to essential requirements of Directive

2006/42/EC (MD).

Once this standard is cited in the Official Journal of the European Union under that Directive,

compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of

the scope of this standard, a presumption of conformity with the corresponding essential requirements

of that Directive, and associated EFTA regulations.

Table ZA.1 — Correspondence between this European Standard and Directive 2006/42/EC (MD)

Essential Requirements of Clause(s)/sub-clause(s) of Remarks/Notes
Directive 2006/42/EC (MD) this EN
1.1.2. Principles of safety 5.4.1; 5.13; 6; 7.3.5
integration
1.1.3. Materials and products 5.10.1
1.1.5. Design of machinery to 5.12; 7.3.2
facilitate its handling
1.1.6. Ergonomics 5.4.3.1; 5.4.5; 5.4.6
1.1.7. Operating positions 5.4.5; 5.4.6
1.2.1. Safety and reliability of 5.4.2; 5.4.3; 5.4.3.1; 5.4.3.5;
control systems 5.4.6; 5.4.8; 5.4.8.2; 5.4.8.3
1.2.2. Control devices 5.4.1; 5.4.3; 5.4.3.1; 5.4.3.4;
5.4.3.5.3; 5.4.5; 5.4.6
1.2.3. Starting 5.4.3; 5.4.3.3; 5.4.3.5.3; 5.4.7
1.2.4.1. Normal stop 5.4.3; 5.4.3.5.1
1.2.4.2. Operational stop 5.4.3.5.3
1.2.4.3. Emergency stop 5.4.3.5.3; 5.4.5; 5.4.6; 5.4.7
1.2.4.4. Assembly of 5.4.3.5.3
machinery
1.2.5. Selection of control or 5.4.3; 5.4.3.1; 7.3.6
operating modes
1.2.6. Failure of the power 5.4.3; 5.4.3.5; 5.4.4; 5.4.8.3; 5.5
supply
1.3.1. Risk of loss of stability 5.3; 5.12; 7.3
1.3.2. Risk of break-up during 5.9; 5.10; 7.3.6
---------------------- Page: 6 ----------------------
SIST EN ISO 19225:2018/A1:2020
EN ISO 19225:2017/A1:2019 (E)
operation
1.3.3. Risks due to falling or 5.5
ejected objects
1.3.4. Risks due to surfaces, 5.2.1; 5.9.1
edges
or angles
1.3.7. Risks related to moving 5.9.1; 7.2
parts
1.3.8.1. Moving transmission 5.9
parts
1.3.8.2. Moving parts involved 5.9
in the process
1.3.9. Risks of uncontrolled 5.4.8.2; 5.4.8.3
movements
1.4.1. General requirements 5.9
1.4.2.1. Fixed guards 5.9
1.5.1. Electricity supply 5.4.3; 5.8
1.5.4. Errors of fitting 5.8; 5.9; 5.10; 7
1.5.5. Extreme temperatures 5.2.2; 5.9.3; 5.10.1
1.5.6. Fire 5.11
1.5.8. Noise 5.7.2; A
1.5.13. Emissions of hazardous 5.6.2; 5.6.3
materials and
substances
1.6.1. Machinery maintenance 5.10.1; 5.13; 73.6
1.6.2. Access to operating 5.13
positions and servicing
points
1.6.3. Isolation of energy 5.4.3.2; 5.4.8.5; 5.8.2
sources
1.6.4. Operator intervention 5.4.3.1
1.7.1. Information and 7.2
warnings on the
machinery
1.7.1.1. Information and 5.4.3; 7.3.5
information devices
1.7.1.2. Warning devices 5.4.3; 5.4.3.4;
1.7.2. Warning of residual 7.2
risks
---------------------- Page: 7 ----------------------
SIST EN ISO 19225:2018/A1:2020
EN ISO 19225:2017/A1:2019 (E)
1.7.3. Marking of machinery 5.12; 7.3.1; 7.3.5; 7.3.6; 7.4
1.7.4. Instructions 7.3; 7.3.6
1.7.4.1. General principles for 7.3
the drafting of
instructions
1.7.4.2. Contents of the 7.3.1; 7.3.2; 7.3.3; 7.3.4; 7.3.5;
instructions 7.3.6; A1
3.3 Control systems 5.4.3; 5.4.5; 5.4.6
3.3.3. Travelling function 5.4.5
3.3.4. Movement of pedestrian 5.4; 5.4.6
controlled machinery
3.5.2. Fire 5.11
3.6.1. Signs, signals and 5.4.3.1; 5.4.3.4; 5.4.5; 7.2
warnings
3.6.2. Marking 7.4
5.5. Fire 5.4.8.2

WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European

Standard is maintained in the list published in the Official Journal of the European Union. Users of this

standard should consult frequently the latest list published in the Official Journ

...

SLOVENSKI STANDARD
SIST EN ISO 19225:2018/oprA1:2019
01-januar-2019
6WURML]DSRG]HPQHUXGQLNH3UHPLþQLUXGDUVNLVWURMLQDRGNRSX9DUQRVWQH
]DKWHYH]DYDOMþQHQDNODGDOQHVWURMHLQVLVWHPHVSOXJRP'RSROQLOR$ ,62
'$PG
Underground mining machines - Mobile extracting machines at the face - Safety
requirements for shearer loaders and plough systems - Amendment 1 (ISO
19225:2017/DAmd 1:2018)
Machines d'exploitation de mines et carrières souterraines - Machines mobiles

d'abattage de front de taille - Exigences de sécurité imposées aux haveuses à tambour

(s) et aux rabots - Amendement 1 (ISO 19225:2017/DAmd 1:2018)
Ta slovenski standard je istoveten z: EN ISO 19225:2017/prA1
ICS:
73.100.30 Oprema za vrtanje in Equipment for drilling and
izkopavanje mine excavation
SIST EN ISO 19225:2018/oprA1:2019 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 19225:2018/oprA1:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 19225:2018/oprA1:2019
DRAFT AMENDMENT
ISO 19225:2017/DAM 1
ISO/TC 82 Secretariat: DIN
Voting begins on: Voting terminates on:
2018-11-21 2019-02-13
Underground mining machines — Mobile extracting
machines at the face — Safety requirements for shearer
loaders and plough systems
AMENDMENT 1

Machines d'exploitation de mines et carrières souterraines — Machines mobiles d'abattage de front de

taille — Exigences de sécurité imposées aux haveuses à tambour(s) et aux rabots
AMENDEMENT 1
ICS: 73.100.30
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 19225:2017/DAM 1:2018(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2018
---------------------- Page: 3 ----------------------
SIST EN ISO 19225:2018/oprA1:2019
ISO 19225:2017/DAM 1:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 4 ----------------------
SIST EN ISO 19225:2018/oprA1:2019
ISO 19225:2017/DAM 1:2018(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.