SIST EN 12390-15:2019
(Main)Testing hardened concrete - Part 15: Adiabatic method for the determination of heat released by concrete during its hardening process
Testing hardened concrete - Part 15: Adiabatic method for the determination of heat released by concrete during its hardening process
The European Standard specifies the procedure for the determination of heat released by concrete during its hardening process in adiabatic condition.
Prüfung von Festbeton - Teil 15: Adiabatisches Verfahren zur Bestimmung der Wärme, die während des Erhärtungsprozesses von Beton freigesetzt wird
Dieses Dokument legt das Verfahren zur Bestimmung der Wärme fest, die von Beton während des Erhärtungsprozesses unter adiabatischen Bedingungen freigesetzt wird.
Die Prüfung eignet sich für Probekörper, für die der Nennwert D der gröbsten der im Beton verwendeten Gesteinskörnungen (Dmax) höchstens 32 mm beträgt.
Essai pour béton durci - Partie 15: Méthode adiabatique de détermination de la chaleur dégagée par le béton au cours de son processus de durcissement
Le présent document spécifie le mode opératoire de détermination de la chaleur dégagée par le béton au cours de son processus de durcissement en condition adiabatique.
L’essai est adapté aux éprouvettes ayant une valeur déclarée D de la partie la plus grosse des granulats réellement utilisés dans le béton (Dmax) ne dépassant pas 32 mm.
Preskušanje strjenega betona - 15. del: Adiabatska metoda za ugotavljanje toplote, ki se sprosti med procesom strjevanja betona
Ta evropski standard določa postopek za ugotavljanje toplote, ki se sprosti med procesom strjevanja betona v adiabatskem stanju.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12390-15:2019
01-oktober-2019
Preskušanje strjenega betona - 15. del: Adiabatska metoda za ugotavljanje toplote,
ki se sprosti med procesom strjevanja betona
Testing hardened concrete - Part 15: Adiabatic method for the determination of heat
released by concrete during its hardening process
Prüfung von Festbeton - Teil 15: Adiabatisches Verfahren zur Bestimmung der Wärme,
die während des Erhärtungsprozesses von Beton freigesetzt wird
Essai pour béton durci - Partie 15: Méthode adiabatique de détermination de la chaleur
dégagée par le béton au cours de son processus de durcissement
Ta slovenski standard je istoveten z: EN 12390-15:2019
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
SIST EN 12390-15:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12390-15:2019
---------------------- Page: 2 ----------------------
SIST EN 12390-15:2019
EN 12390-15
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2019
EUROPÄISCHE NORM
ICS 91.100.30
English Version
Testing hardened concrete - Part 15: Adiabatic method for
the determination of heat released by concrete during its
hardening process
Essai pour béton durci - Partie 15 : Méthode Prüfung von Festbeton - Teil 15: Adiabatisches
adiabatique de détermination de la chaleur dégagée Verfahren zur Bestimmung der Wärme, die während
par le béton en cours de durcissement des Erhärtungsprozesses von Beton freigesetzt wird
This European Standard was approved by CEN on 17 June 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12390-15:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 12390-15:2019
EN 12390-15:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms, definitions, symbols and scripts . 4
3.1 Terms and definitions . 4
3.2 Symbols and scripts . 5
4 Principle . 6
5 Apparatus . 6
5.1 Thermometers . 6
5.2 Balance . 6
5.3 Temperature monitoring and control system . 6
5.4 Adiabatic calo
...
SLOVENSKI STANDARD
oSIST prEN 12390-15:2016
01-april-2016
Preskušanje strjenega betona - 15. del: Adiabatska metoda za ugotavljanje toplote,
ki se sprosti med procesom strjevanja betona
Testing hardened concrete - Part 15: Adiabatic method for the determination of heat
released by concrete during its hardening process
Prüfung von Festbeton - Teil 15: Adiabatisches Verfahren zur Bestimmung der Wärme,
die während des Erhärtungsprozesses von Beton freigesetzt wird
Essai pour béton durci - Partie 15: Méthode adiabatique de détermination de la chaleur
dégagée par le béton au cours de son processus de durcissement
Ta slovenski standard je istoveten z: prEN 12390-15
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
oSIST prEN 12390-15:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 12390-15:2016
---------------------- Page: 2 ----------------------
oSIST prEN 12390-15:2016
DRAFT
EUROPEAN STANDARD
prEN 12390-15
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2016
ICS 91.100.30
English Version
Testing hardened concrete - Part 15: Adiabatic method for
the determination of heat released by concrete during its
hardening process
Essai pour béton durci - Partie 15 Prüfung von Festbeton - Teil 15: Adiabatisches
Verfahren zur Bestimmung der Wärme, die während
des Erhärtungsprozesses von Beton freigesetzt wird
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 104.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12390-15:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 12390-15:2016
prEN 12390-15:2016 (E)
Contents Page
European Foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms, definitions, symbols and scripts . 4
3.1 Terms and definitions . 4
3.2 Symbols and scripts . 5
4 Principle . 6
5 Apparatus . 6
5.1 Thermometers . 6
5.2 Balance .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.