SIST EN 12312-13:2003+A1:2009
(Main)Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment
Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment
This European Standard specifies the technical requirements to minimise the hazards listed in clause 4 which can arise during the commissioning, operation and maintenance of lavatory service equipment when carried out in accordance with the specifications given by the manufacturer or his authorised representative. It also takes into account some requirements recognised as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and handling agencies.
This standard applies to:
- self-propelled lavatory vehicles;
- towable lavatory vehicles;
- moveable parts of ramp integrated systems,
designed for servicing aircraft and intended to be used under the conditions given in clause 1 of EN 1915-1:2001 (examples see annex A).
This standard does not establish requirements for hazards caused by noise and vibration.
This Part of EN 12312 is not applicable to lavatory service equipment which is manufactured before the date of publication of this standard by CEN.
This part of EN 12312 is intended to be used in conjunction with EN 1915-1, EN 1915-2, EN 1915-3 (for vehicles) and EN 1915-4.
Luftfahrt-Bodengeräte - Besondere Anforderungen - Teil 13: Toiletten-Servicegeräte
Matériel au sol pour aéronefs - Exigences particulières - Partie 13: Vide-toilettes
Podporna oprema na tleh za letalski promet - Posebne zahteve - 13. del: Servisna oprema za stranišča
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luftfahrt-Bodengeräte - Besondere Anforderungen - Teil 13: Toiletten-ServicegeräteMatériel au sol pour aéronefs - Exigences particulières - Partie 13: Vide-toilettesAircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment49.100Oprema za servis in vzdrževanje na tlehGround service and maintenance equipmentICS:Ta slovenski standard je istoveten z:EN 12312-13:2002+A1:2009SIST EN 12312-13:2003+A1:2009en01-julij-2009SIST EN 12312-13:2003+A1:2009SLOVENSKI
STANDARD
SIST EN 12312-13:2003+A1:2009
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12312-13:2002+A1
April 2009 ICS 49.100 Supersedes EN 12312-13:2002English Version
Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment
Matériel au sol pour aéronefs - Exigences particulières - Partie 13: Vide-toilettes
Luftfahrt-Bodengeräte - Besondere Anforderungen - Teil 13: Toiletten-Servicegeräte This European Standard was approved by CEN on 29 May 2002 and includes Amendment 1 approved by CEN on 1 March 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12312-13:2002+A1:2009: ESIST EN 12312-13:2003+A1:2009
EN 12312-13:2002+A1:2009 (E) 2 Contents page Foreword . 3Introduction . 41Scope . 42Normative references . 43Terms and definitions . 54List of hazards . 55Safety requirements and/or measures . 65.1General requirements . 65.2Tanks . 65.3Waste hoses . 75.4Rinsing system components . 75.5Workplaces . 86Information for use . 86.1Marking . 86.2Additional marking . 86.3Warnings . 86.4Instructions . 97Verification of requirements . 9Annex A (informative)
Examples of lavatory service equipment . 10Annex B (normative)
List of hazards . 11Annex ZA (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC"""" . 13Annex ZB (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC"""" . 14Bibliography . 15
SIST EN 12312-13:2003+A1:2009
EN 12312-13:2002+A1:2009 (E) 3 Foreword This document (EN 12312-13:2002+A1:2009) has been prepared by Technical Committee CEN/TC 274 "Aircraft ground support equipment", the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This document includes Amendment 1, approved by CEN on 2009-03-01. This document supersedes EN 12312-13:2002. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! ". This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directives, see informative Annexes ZA and ZB, which are integral parts of this document." The Parts of EN 12312 — Aircraft ground support equipment – Specific requirements — are: Part 1: Passenger stairs Part 2: Catering vehicles Part 3: Conveyor belt vehicles Part 4: Passenger boarding bridges Part 5: Aircraft fuelling equipment Part 6: Deicers and deicing/antiicing equipment Part 7: Aircraft movement equipment Part 8: Maintenance stairs and platforms Part 9: Container/Pallet loaders Part 10: Container/Pallet transfer transporters Part 11: Container/Pallet dollies and loose load trailers Part 12: Potable water service equipment Part 13: Lavatory service equipment Part 14: Disabled/Incapacitated passenger boarding equipment Part 15: Baggage and equipment tractors Part 16: Air start equipment Part 17: Air conditioning equipment Part 18: Nitrogen or Oxygen units Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions Part 20: Ground power equipment Annex A is informative and annex B is normative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-bourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 12312-13:2003+A1:2009
EN 12312-13:2002+A1:2009 (E) 4 Introduction This European Standard specifies health and safety requirements, as well as some functional and performance requirements for lavatory service equipment intended for servicing all aircraft types commonly in service in civil air transport. The minimum essential criteria are considered to be of primary importance in providing safe, serviceable, economical, and practical lavatory service equipment. Deviations from the recommended criteria should occur only after careful consideration, extensive testing, risk assessment and thorough service evaluation have shown alternative methods or conditions to be satisfactory. This European Standard is a Type C standard as stated in !EN ISO 12100". 1 Scope This European Standard specifies the technical requirements to minimise the hazards listed in clause 4 which can arise during the commissioning, operation and maintenance of lavatory service equipment when carried out in accordance with the specifications given by the manufacturer or his authorised representative. It also takes into account some requirements recognised as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and handling agencies. This standard applies to: self-propelled lavatory vehicles; towable lavatory vehicles; moveable parts of ramp integrated systems, designed for servicing aircraft and intended to be used under the conditions given in clause 1 of EN 1915-1:2001 (examples see annex A). This standard does not establish requirements for hazards caused by noise and vibration. This Part of EN 12312 is not applicable to lavatory service equipment which is manufactured before the date of publication of this standard by CEN. !This part of EN 12312 is intended to be used in conjunction with EN 1915-1, EN 1915-2, EN 1915-3 (for vehicles) and EN 1915-4." 2 Normative references !The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies." !deleted text" EN 954-1:1996, Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design EN 1050:1996, Safety of machinery — Principles for risk assessment !deleted text" !EN 1837", Safety of machinery — Integral lighting of machines SIST EN 12312-13:2003+A1:2009
EN 12312-13:2002+A1:2009 (E) 5 EN 1915-1:2001, Aircraft ground support equipment — General requirements — Part 1: Basic safety requirements !EN 1915-2", Aircraft ground support equipment — General requirements — Part 2: Stability and strength requirements, calculations and test methods !EN 1915-3, Aircraft ground support equipment — General requirements — Part 3: Vibration measurement methods and reduction EN 1915-4, Aircraft ground support equipment — General requirements — Part 4: Noise measurement methods and reduction" !EN ISO 12100-1:2003, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology (ISO 12100-1:2003)" !EN ISO 12100-2:2003, Safety of machinery — Basic concepts, general principles for design — Part 2: Techni-cal principles (ISO 12100-2:2003)" !ISO 17775, Aircraft — Ground-service connections — Potable water, toilet-flush water and toilet drain"
3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in !EN ISO 12100:2003" and EN 1915-1:2001 together with the following apply. 3.1 lavatory service equipment ground support equipment (GSE) for aircraft toilet servicing 3.2 lavatory vehicle self-propelled or towable lavatory service equipment 3.3 waste system part of the lavatory service equipment to collect the waste from toilet systems on aircraft 3.4 rinsing system part of the lavatory service equipment for flushing and refilling aircraft toilet systems 3.5 open work material flooring material for standing areas with openings to allow self-draining and cleaning 4 List of hazards The list of risks and hazards (see annex B) is based on EN 1050:1996 and contains the hazards and hazardous situations, as far as they are dealt with in this European Standard, identified by risk assessment as significant for lavatory service equipment and which require action to eliminate or reduce risks. Not covered are risks and hazards due to a standard automotive chassis, the traffic, !repair" and general misuse. SIST EN 12312-13:2003+A1:2009
EN 12312-13:2002+A1:2009 (E) 6 5 Safety requirements and/or measures 5.1 General requirements 5.1.1 !!!!Lavatory service equipment shall conform to the relevant requirements of EN 1915-1, EN 1915-2, EN 1915-3 and EN 1915-4 unless otherwise specified in this standard." They shall also conform to the specific requirements of this standard. 5.1.2 Stability and strength calculations shall be carried out in accord
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.