SIST EN 13428:2004

Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction

This document specifies a procedure for assessment of packaging to ensure that the weight and/or volume of
its material content is at the minimum commensurate with the maintenance of :
 functionality throughout the supply and user chain ;
 safety and hygiene for both product and user/consumer ;
 acceptability of the packed product to the user/consumer.
This document also specifies the methodology and procedure for determining the presence of the four heavy
metals named in article 11 of the packaging and packaging waste Directive 94/62/EC and for determining the
presence and minimisation of any dangerous substances or preparations if they are present in packaging and
are likely to be released into the environment as a result of waste management operations. The procedures
are referenced in CR 13695-1 and CEN/TR 13695-2.
NOTE The substitution of one packaging material by another is not a basis for source reduction.
This document cannot by itself provide presumption of conformity. The procedure for applying this document
is contained in EN 13427.

Verpackung - Spezifische Anforderungen an die Herstellung und Zusammensetzung - Ressourcenschonung durch Verpackungsminimierung

Emballage - Exigences spécifiques a la fabrication et a la composition - Prévention par la réduction a la source

Embalaža - Posebne zahteve za proizvodnjo in sestavo - Preventiva z zmanjševanjem pri izvoru

General Information

• Status: Published
• Publication Date: 31-Aug-2004
• ICS: 13.030.99 - Other standards related to wastes
• ICS: 55.020 - Packaging and distribution of goods in general
• Technical Committee: EPO - Packaging - sales and grouped
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-2004
• Due Date: 01-Sep-2004
• Completion Date: 01-Sep-2004
• Directive: 94/62/EC - European Parliament and Council Directive 94/62/EC of 20 December 1994 on packaging and packaging waste
• Directive: TP141 - Uredba o ravnanju z embalažo in odpadno embalažo
• Directive: TP230 - Uredba o embalaži in odpadni embalaži
• Mandate: M/317 - Second standardization mandate to CEN related to the packaging and packaging waste directive 94/62/EC
• Ref Project: EN 13428:2004 - Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction

Relations

• Replaces: SIST EN 13428:2001 - Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction
• Effective Date: 01-Sep-2004

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13428:2004
01-september-2004
Nadomešča:
SIST EN 13428:2001
Embalaža - Posebne zahteve za proizvodnjo in sestavo - Preventiva z
zmanjševanjem pri izvoru
Packaging - Requirements specific to manufacturing and composition - Prevention by
source reduction
Verpackung - Spezifische Anforderungen an die Herstellung und Zusammensetzung -
Ressourcenschonung durch Verpackungsminimierung
Emballage - Exigences spécifiques a la fabrication et a la composition - Prévention par la
réduction a la source
Ta slovenski standard je istoveten z: EN 13428:2004
ICS:
13.030.99 Drugi standardi v zvezi z Other standards related to
odpadki wastes
55.020 Pakiranje in distribucija blaga Packaging and distribution of
na splošno goods in general
SIST EN 13428:2004 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13428:2004

---------------------- Page: 2 ----------------------
SIST EN 13428:2004



EUROPEAN STANDARD
EN 13428

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2004
ICS 13.030.99; 55.020 Supersedes EN 13428:2000
English version
Packaging - Requirements specific to manufacturing and
composition - Prevention by source reduction
Emballage - Exigences spécifiques à la fabrication et à la Verpackung - Spezifische Anforderungen an die
composition - Prévention par la réduction à la source Herstellung und Zusammensetzung - Ressourcenschonung
durch Verpackungsminimierung
This European Standard was approved by CEN on 5 May 2004.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.




EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13428:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 13428:2004
EN 13428:2004 (E)
Contents Page
Foreword.4
Introduction .5
1 Scope .6
2 Normative references .6
3 Terms and definitions .6
4 Requirements.7
4.1 Application .7
4.2 Packaging assessment .7
4.2.1 General.7
4.2.2 Determination of critical area .7
4.2.3 Determination of presence of dangerous substances or preparations.8
4.2.4 Determination of the four named heavy metals .8
4.3 Demonstration of Conformity.8
4.
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Packaging - Requirements specific to manufacturing and composition - Prevention by source reductionEmbalaža - Posebne zahteve za proizvodnjo in sestavo - Preventiva z zmanjševanjem pri izvoruEmballage - Exigences spécifiques a la fabrication et a la composition - Prévention par la réduction a la sourceVerpackung - Spezifische Anforderungen an die Herstellung und Zusammensetzung - Ressourcenschonung durch VerpackungsminimierungTa slovenski standard je istoveten z:EN 13428:2004SIST EN 13428:2004en,fr,de55.02013.030.99ICS:SIST EN 13428:20011DGRPHãþDSLOVENSKI
STANDARDSIST EN 13428:200401-september-2004







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13428
July 2004 ICS 13.030.99; 55.020
Supersedes EN 13428:2000 English version
Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction
Emballage - Exigences spécifiques à la fabrication et à la composition - Prévention par la réduction à la source
Verpackung - Spezifische Anforderungen an die Herstellung und Zusammensetzung - Ressourcenschonung durch Verpackungsminimierung This European Standard was approved by CEN on 5 May 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13428:2004: E



EN 13428:2004 (E) 2 Contents Page Foreword.4 Introduction.5 1 Scope.6 2 Normative references.6 3 Terms and definitions.6 4 Requirements.7 4.1 Application.7 4.2 Packaging assessment.7 4.2.1 General.7 4.2.2 Determination of critical area.7 4.2.3 Determination of presence of dangerous substances or preparations.8 4.2.4 Determination of the four named heavy metals.8 4.3 Demonstration of Conformity.8 4.3.1 Demonstration of source reduction.8 4.3.2 Demonstration of minimisation of dangerous substances or preparations.9 4.3.3 Demonstration of conformity with the limit for the presence of the named heavy metals.9 5 List of performance criteria.
...