13.030.99 - Other standards related to wastes

This document specifies a method for the determination of the ultimate anoxic biodegradability of plastics made of organic compounds, where the amount of the produced nitrogen and carbon dioxide at the end of the test is measured.
The test substance is exposed to an inoculum stemming from the denitrification tank of a wastewater treatment plant. Testing is performed under defined laboratory conditions.

This document is used in the framework of the waste processing industry and defines the processing of relevant information for the deposit of garbage between access chips and the collection container systems.
This document is not intended to be used for container identification.
NOTE The container identification is covered by EN 14803.
This document provides the technical specification and the restrictions that are defined on top of the ISO 14443 series (Parts 1, 2 and 3).

This document summarizes methods for the determination of the parameters pH, ammonium, AOX, As, Ba, Cd, Cl-, easily liberatable cyanide, Co, Cr, Cr(VI), Cu, DOC/TOC, electrical conductivity, F-, Hg, Mo, Ni, NO2-, Pb, phenol index, total S, Sb, Se, SO42-, TDS, V and Zn in aqueous eluates for the characterization of waste.

This document defines the primary space debris mitigation requirements applicable to all elements of systems launched into, or passing through, near-Earth space, including launch vehicle orbital stages, operating spacecraft and any objects released as part of normal operations or disposal actions.
The requirements contained in this document are intended to reduce the growth of space debris by ensuring that spacecraft and launch vehicle orbital stages are designed, operated and disposed of in a ...view more

This document specifies a method for determining the ultimate aerobic biodegradability of plastic
materials under controlled composting conditions by gravimetric measurement of the amount of carbon
dioxide evolved. The method is designed to yield an optimum rate of biodegradation by adjusting the
humidity, aeration and temperature of the composting vessel.
The method applies to the following materials:
— natural and/or synthetic polymers and copolymers, and mixtures of these;
— plastic mat...view more

This Technical Report provides information on the alignment between Directive 2012/19/EU and EN 50625 series standards and EN 50614.

This Technical Report provides information on the alignment between Directive 2012/19/EU and EN 50625 series standards and EN 50614.

Clause 1 is replaced with the following:
This European Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard for photovoltaic panels, FprEN 50625-2-4 and Technical Specification for de-pollution - General CLC/TS 50625-3-1:2015.

This clause of part 1 is replaced with the following:
This European Standard is applicable to the treatment of photovoltaic panels as mentioned in the WEEE Directive under Annex 4.
The scope of this document is limited to photovoltaic panels with a minimum surface area of 0,2 m2.
This European Standard applies to the treatment of photovoltaic panels until end-of-waste status is fulfilled, or photovoltaic panel fractions are recycled, recovered or disposed.
This European Standard addresses al...view more

This clause of part 1 is replaced with the following: This European Standard is applicable to the treatment of photovoltaic panels as mentioned in the WEEE Directive under Annex 4. The scope of this document is limited to photovoltaic panels with a minimum surface area of 0,2 m2. This European Standard applies to the treatment of photovoltaic panels until end-of-waste status is fulfilled, or photovoltaic panel fractions are recycled, recovered or disposed. This European Standard addresses all op...view more

Clause 1 is replaced with the following: This European Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard for photovoltaic panels, FprEN 50625-2-4 and Technical Specification for de-pollution - General CLC/TS 50625-3-1:2015.

Clause 1 of CLC/TS 50625-3-1:2015 is replaced with the following:
This European Technical Specification is intended to be used in conjunction with CLC/TS 50625-3-1 Collection, logistics and treatment requirements for WEEE - Part 1: General treatment requirements, EN 50625 1, Collection, logistics and Treatment requirements for WEEE - Part 2-2: Treatment requirements for WEEE containing CRTs and flat panel displays, EN 50625-2-2 and Collection, logistics and treatment requirements for WEEE - Par...view more

This Technical Specification addresses the processes regarding the recycling of copper and/or precious metals contained in WEEE and fractions of WEEE.
NOTE 1   For the treatment of WEEE EN 50625-1 applies.
This Technical Specification relates to the chemical and metallurgical processes used for the recycling of copper and/or precious metals contained in WEEE and fractions of WEEE, thereby differentiating it from manual/mechanical processing (see Annex A).
All chemical and metallurgical processe...view more

This Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard for temperature exchange equipment, EN 50625-2-3, and the Technical Specification for de-pollution, CLC/TS 50625 3-1.

This Technical Specification applies to the following operations: collection, handling, sorting, storage, preparation for transport and transport of WEEE. It is applicable to all WEEE prior to arriving at the treatment facility or arriving at a preparation for re-use facility.
This Technical Specification addresses all operators that perform collection and logistics operations.
This technical specification does not cover treatment of WEEE. In case of treatment activities undertaken at col...view more

This Technical Specification addresses the processes regarding the recycling of copper and/or precious metals contained in WEEE and fractions of WEEE. NOTE 1 For the treatment of WEEE EN 50625-1 applies. This Technical Specification relates to the chemical and metallurgical processes used for the recycling of copper and/or precious metals contained in WEEE and fractions of WEEE, thereby differentiating it from manual/mechanical processing (see Annex A). All chemical and metallurgical processes a...view more

Clause 1 of CLC/TS 50625-3-1:2015 is replaced with the following: This European Technical Specification is intended to be used in conjunction with CLC/TS 50625-3-1 Collection, logistics and treatment requirements for WEEE - Part 1: General treatment requirements, EN 50625 1, Collection, logistics and Treatment requirements for WEEE - Part 2-2: Treatment requirements for WEEE containing CRTs and flat panel displays, EN 50625-2-2 and Collection, logistics and treatment requirements for WEEE - Part...view more

This Technical Specification is intended to be used in conjunction with the WEEE Treatment Standard for temperature exchange equipment, EN 50625-2-3, and the Technical Specification for de-pollution, CLC/TS 50625 3-1.

This European Standard is applicable to the treatment of waste temperature exchange equipment and other WEEE containing VFC or VHC in refrigerants or blowing agents. This European Standard applies to the treatment of temperature exchange equipment until end-of-waste status is fulfilled, or temperature exchange equipment fractions are recycled, recovered, or disposed of. This European Standard addresses all operators involved in the treatment including related handling, sorting and storage of tem...view more

This Technical Specification applies to the following operations: collection, handling, sorting, storage, preparation for transport and transport of WEEE. It is applicable to all WEEE prior to arriving at the treatment facility or arriving at a preparation for re-use facility. This Technical Specification addresses all operators that perform collection and logistics operations. This technical specification does not cover treatment of WEEE. In case of treatment activities undertaken at collection...view more