SIST EN 13314:2003

Tanks for transport of dangerous goods - Service equipment for tanks - Fill hole cover

This European standard is applicable to fill hole covers and specifies the performance requirements, critical dimensions and tests necessary to verify the compliance of the equipment to this standard. The equipment specified in this standard is suitable for use with liquid petroleum products and other dangerous substances of class 3 (flammable liquids) of ADR - European Agreement concerning the International Carriage of Dangerous Goods By Road - which have a vapour pressure at 50°C not greater than 110kPa.

Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Fülllochdeckel

Diese Europäische Norm gilt für Füllochdeckel und legt Leistungsanforderungen, entscheidende Maße sowie Prüfungen fest, die erforderlich sind um nachzuweisen, daß die Ausrüstung der vorliegenden Norm entspricht. Die in dieser Norm beschriebene Ausrüstung ist zum Umfüllen flüssiger Erdölerzeugnisse und anderer gefährlicher Güter der Klasse 3 (feuergefährliche Güter) geeignet, deren Dampfdruck bei 50°C maximal 110 kPa beträgt und für deren Transport auf der Straße die ADR (European Agreement concerning the International Carriage of Dangerous Goods by Road) gilt.

Citernes de transport de matieres dangereuses - Equipements de service pour citernes - Couvercle de trou de remplissage

La présente Norme européenne s'applique aux couvercles de trou de remplissage et spécifie les exigences de performance, les dimensions et les essais nécessaires pour vérifier la conformité du dispositif a la présente norme.
L'équipement spécifié par la présente norme convient a une utilisation avec des produits pétroliers liquides et autres matieres dangereuses de la classe 3 de l'ADR - Accord européen relatif au transport international des marchandises dangereuses par route (liquides inflammables) dont la tension de vapeur ne dépasse pas 110 kPa a 50 °C (y compris l'essence) et qui n'appartiennent a aucune sous-classification des produits toxiques ou corrosifs.

Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Pokrov polnilne odprtine

General Information

• Status: Published
• Publication Date: 30-Nov-2003
• ICS: 13.300 - Protection against dangerous goods
• ICS: 23.020.20 - Vessels and containers mounted on vehicles
• Technical Committee: TLP - Pressure vessels
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2003
• Due Date: 01-Dec-2003
• Completion Date: 01-Dec-2003
• Directive: 94/55/EC - Transport of dangerous goods by road
• Directive: 96/49/EC - Transport of dangerous goods by rail
• Directive: 96/86/EC - Transport of dangerous goods by road (94/55/EC Dir. amendment)
• Directive: 96/87/EC - Transport of dangerous goods by rail (96/49/EC Dir. amendment)
• Ref Project: EN 13314:2002 - Tanks for transport of dangerous goods - Service equipment for tanks - Fill hole cover

Relations

• Child: SIST EN 13317:2003 - Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Pokrov polnilne odprtineTanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - FülllochdeckelCiternes de transport de matieres dangereuses - Equipements de service pour citernes - Couvercle de trou de remplissageTanks for transport of dangerous goods - Service equipment for tanks - Fill hole cover23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 13314:2002SIST EN 13314:2003en01-december-2003SIST EN 13314:2003SLOVENSKI
STANDARD



SIST EN 13314:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13314October 2002ICS 13.300; 23.020.20English versionTanks for transport of dangerous goods - Service equipment fortanks - Fill hole coverCiternes de transport de matières dangereuses -Equipements de service pour citernes - Couvercle de troude remplissageTanks für die Beförderung gefährlicher Güter -Bedienungsausrüstung von Tanks - FülllochdeckelThis European Standard was approved by CEN on 19 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13314:2002 ESIST EN 13314:2003



EN 13314:2002 (E)2ContentspageForeword.3Introduction.41Scope.52Normative references.53Terms and definitions.54Function.65Design characteristics.65.1Leak tightness.65.1.1Pressure tightness.65.1.2Drop test.65.2Temperature range.65.3Latching mechanism.65.4Materials of construction.65.5Dimensional characteristics.65.6Electrical resistance.76Tests.76.1General.76.2Production tests.76.2.1General.76.2.2Seat tightness test.76.2.3Test results.76.3Type tests.76.3.1General.76.3.2Seat tightness test.86.3.3Drop test.86.3.4Test results.97Marking.98Installation, operating and maintenance instructions.9Annex A (normative)
Drop test apparatus.10SIST EN 13314:2003



EN 13314:2002 (E)3ForewordThis document (EN 13314:2002) has been prepared by Technical Committee CEN /TC 296, "Tanks for transport ofdangerous goods", the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by April 2003, and conflicting national standards shall be withdrawn at the latest byApril 2003.This document has been prepared under a mandate given to CEN by the European Commission and the EuropeanFree Trade Association, and supports the objectives of the framework Directives on Transport of DangerousGoods.This European Standard has been submitted for reference into the RID and/or in the technical annexes of the ADR.Therefore in this context the standards listed in the normative references and covering basic requirements of theRID/ADR not addressed within the present standard are normative only when the standards themselves arereferred to in the RID and/or in the technical annexes of the ADR.This European Standard forms part of a coherent standards programme comprising the following standards:Tanks for transport of dangerous goods - Service equipment for tanksEN 13081, Vapour collection adaptor and coupler.EN 13082, Vapour transfer valve.EN 13083, Adapter for bottom loading and unloading.prEN 13308, Non-pressure balanced footvalve.EN 13314, Fill hole cover.EN 13315, Gravity discharge coupler.prEN 13316, Pressure balanced footvalve.prEN 13317, Manhole cover assembly.WI 296009, Pressure and vacuum breather vent.WI 296010, Emergency pressure relief valve.Annex A is normative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 13314:2003



EN 13314:2002 (E)4IntroductionThe fill hole cover, the subject of this standard, is an operating device on top of a transportable tank which allowsthe opening and closing of the fill hole.The fill hole cover allows the top filling of the tank compartment.The fill hole cover may also act as a liquid or vapour emergency pressure relief valve.SIST EN 13314:2003



EN 13314:2002 (E)51 ScopeThis European Standard covers the fill hole cover and specifies the performance requirements, dimensions andtests necessary to verify the compliance of the equipment to this standard.The equipment specified by this standard is suitable for use with liquid petroleum products and other dangeroussubstances of Class 3 of ADR - European Agreement concerning the International Carriage of Dangerous Goodsby Road – (flammable l
...