EN 13314:2002

Tanks for transport of dangerous goods - Service equipment for tanks - Fill hole cover

This European standard is applicable to fill hole covers and specifies the performance requirements, critical dimensions and tests necessary to verify the compliance of the equipment to this standard. The equipment specified in this standard is suitable for use with liquid petroleum products and other dangerous substances of class 3 (flammable liquids) of ADR - European Agreement concerning the International Carriage of Dangerous Goods By Road - which have a vapour pressure at 50°C not greater than 110kPa.

Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Fülllochdeckel

Diese Europäische Norm gilt für Füllochdeckel und legt Leistungsanforderungen, entscheidende Maße sowie Prüfungen fest, die erforderlich sind um nachzuweisen, daß die Ausrüstung der vorliegenden Norm entspricht. Die in dieser Norm beschriebene Ausrüstung ist zum Umfüllen flüssiger Erdölerzeugnisse und anderer gefährlicher Güter der Klasse 3 (feuergefährliche Güter) geeignet, deren Dampfdruck bei 50°C maximal 110 kPa beträgt und für deren Transport auf der Straße die ADR (European Agreement concerning the International Carriage of Dangerous Goods by Road) gilt.

Citernes de transport de matières dangereuses - Equipements de service pour citernes - Couvercle de trou de remplissage

La présente Norme européenne s'applique aux couvercles de trou de remplissage et spécifie les exigences de performance, les dimensions et les essais nécessaires pour vérifier la conformité du dispositif à la présente norme.
L'équipement spécifié par la présente norme convient à une utilisation avec des produits pétroliers liquides et autres matières dangereuses de la classe 3 de l'ADR - Accord européen relatif au transport international des marchandises dangereuses par route (liquides inflammables) dont la tension de vapeur ne dépasse pas 110 kPa à 50 °C (y compris l'essence) et qui n'appartiennent à aucune sous-classification des produits toxiques ou corrosifs.

Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Pokrov polnilne odprtine

General Information

• Status: Published
• Publication Date: 22-Oct-2002
• Withdrawal Date: 29-Apr-2003
• ICS: 13.300 - Protection against dangerous goods
• ICS: 23.020.10 - Stationary containers and tanks
• ICS: 23.020.20 - Vessels and containers mounted on vehicles
• Technical Committee: CEN/TC 296 - Tanks for transport of dangerous goods
• Drafting Committee: CEN/TC 296/WG 7 - Service equipment (including equipment for vapour recovery, bottom loading, the confinement and handling of petroleum products)
• Current Stage: 9020 - Submission to 2 Year Review Enquiry - Review Enquiry
• Start Date: 15-Jan-2024
• Completion Date: 15-Jan-2024
• Directive: 94/55/EC - Transport of dangerous goods by road
• Directive: 96/49/EC - Transport of dangerous goods by rail
• Directive: 96/86/EC - Transport of dangerous goods by road (94/55/EC Dir. amendment)
• Directive: 96/87/EC - Transport of dangerous goods by rail (96/49/EC Dir. amendment)
• Directive: TRRTP121 - Sklep o objavi prilog A in B k Evropskemu sporazumu o mednarodnem cestnem prevozu nevarnega blaga (ADR)
• Ref Project: SIST EN 13314:2003 - Tanks for transport of dangerous goods - Service equipment for tanks - Fill hole cover

Relations

• Child: EN 13317:2002 - Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Pokrov polnilne odprtineTanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - FülllochdeckelCiternes de transport de matieres dangereuses - Equipements de service pour citernes - Couvercle de trou de remplissageTanks for transport of dangerous goods - Service equipment for tanks - Fill hole cover23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 13314:2002SIST EN 13314:2003en01-december-2003SIST EN 13314:2003SLOVENSKI
STANDARD



SIST EN 13314:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13314October 2002ICS 13.300; 23.020.20English versionTanks for transport of dangerous goods - Service equipment fortanks - Fill hole coverCiternes de transport de matières dangereuses -Equipements de service pour citernes - Couvercle de troude remplissageTanks für die Beförderung gefährlicher Güter -Bedienungsausrüstung von Tanks - FülllochdeckelThis European Standard was approved by CEN on 19 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13314:2002 ESIST EN 13314:2003



EN 13314:2002 (E)2ContentspageForeword.3Introduction.41Scope.52Normative references.53Terms and definitions.54Function.65Design characteristics.65.1Leak tightness.65.1.1Pressure tightness.65.1.2Drop test.65.2Temperature range.65.3Latching mechanism.65.4Materials of construction.65.5Dimensional characteristics.65.6Electrical resistance.76Tests.
...