Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures

This Technical Report gives guidance on the use of conformity assessment procedures for industrial piping in relation to EN 13480.

Metallische industrielle Rohrleitungen - Teil 7: Anleitung für den Gebrauch des Konformitätsbewertungsverfahrens

Tuyauteries industrielles métalliques - Partie 7 : Guide pour l'utilisation des procédures d'évaluation de la conformité

Kovinski industrijski cevovodi - 7. del: Navodila za ugotavljanje skladnosti

General Information

Status
Published
Public Enquiry End Date
02-May-2017
Publication Date
12-Dec-2017
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
27-Nov-2017
Due Date
01-Feb-2018
Completion Date
13-Dec-2017

RELATIONS

Buy Standard

Technical report
SIST-TP CEN/TR 13480-7:2018
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST-TP CEN/TR 13480-7:2018
01-januar-2018
1DGRPHãþD
SIST CEN/TR 13480-7:2002
Kovinski industrijski cevovodi - 7. del: Navodila za ugotavljanje skladnosti

Metallic industrial piping - Part 7: Guidance on the use of conformity assessment

procedures
Metallische industrielle Rohrleitungen - Teil 7: Anleitung für den Gebrauch des
Konformitätsbewertungsverfahrens

Tuyauteries industrielles métalliques - Partie 7 : Guide pour l'utilisation des procédures

d'évaluation de la conformité
Ta slovenski standard je istoveten z: CEN/TR 13480-7:2017
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST-TP CEN/TR 13480-7:2018 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TP CEN/TR 13480-7:2018
---------------------- Page: 2 ----------------------
SIST-TP CEN/TR 13480-7:2018
CEN/TR 13480-7
TECHNICAL REPORT
RAPPORT TECHNIQUE
July 2017
TECHNISCHER BERICHT
ICS 23.040.01 Supersedes CEN/TR 13480-7:2002
English Version
Metallic industrial piping - Part 7: Guidance on the use of
conformity assessment procedures

Tuyauteries industrielles métalliques - Partie 7 : Guide Metallische industrielle Rohrleitungen - Teil 7:

pour l'utilisation des procédures d'évaluation de la Anleitung für den Gebrauch des

conformité Konformitätsbewertungsverfahrens

This Technical Report was approved by CEN on 19 June 2017. It has been drawn up by the Technical Committee CEN/TC 267.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 13480-7:2017 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TP CEN/TR 13480-7:2018
CEN/TR 13480-7:2017 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

1 Scope .................................................................................................................................................................... 4

2 Normative references .................................................................................................................................... 4

3 Terms and definitions ................................................................................................................................... 4

4 Application of the PED ................................................................................................................................... 4

4.1 General ................................................................................................................................................................ 4

4.2 Conformity assessment procedures ......................................................................................................... 4

4.2.1 General ................................................................................................................................................................ 4

4.2.2 Choice of conformity assessment procedures ...................................................................................... 4

4.2.3 Conformity assessment procedures and the involvement of Responsible Authorities ........ 5

5 Subcontracting ................................................................................................................................................. 5

Annex A (informative) Conformity of industrial piping to the essential safety requirements

of Directive 2014/68/EU (Pressure equipment directive) .............................................................. 6

A.1 Introduction ...................................................................................................................................................... 6

A.2 Conformity assessment procedure ........................................................................................................... 6

A.3 Certification and CE marking ...................................................................................................................... 7

A.3.1 Declaration of conformity, CE marking ................................................................................................... 7

A.3.2 Notified body's identification mark and certificate ............................................................................ 7

Annex B (informative) Summary of inspection and testing activities ...................................................... 8

Bibliography ................................................................................................................................................................. 17

---------------------- Page: 4 ----------------------
SIST-TP CEN/TR 13480-7:2018
CEN/TR 13480-7:2017 (E)
European foreword

This document (CEN/TR 13480-7:2017) has been prepared by Technical Committee CEN/TC 267

“Industrial piping and pipelines”, the secretariat of which is held by AFNOR.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent

rights.
This document supersedes CEN/TR 13480-7:2002.

EN 13480, Metallic industrial piping consists of eight interdependent and not dissociable Parts which

include:
— Part 1: General
— Part 2: Materials
— Part 3: Design
— Part 4: Fabrication and installation
— Part 5: Inspection and testing
— Part 6: Additional requirements for buried piping
— CEN/TR 13480-7, Guidance on the use of conformity assessment procedures
— Part 8: Additional requirements for aluminium and aluminium alloy piping

The significant technical changes between this Technical Report and the previous edition are:

— a general revision of this document to comply with PED 2014/68/UE;

— in Table A.1, inclusion of new Modules designation and addition of the Module G ;

— in sub-clause A.3, revision of the documentation ;

— in Table B.2, update of cross references for detailed requirements in EN 13480-4:2017 and

EN 13480-5:2017.

NOTE These technical changes are the significant technical changes but it is not an exhaustive list of

all modifications.
---------------------- Page: 5 ----------------------
SIST-TP CEN/TR 13480-7:2018
CEN/TR 13480-7:2017 (E)
1 Scope

This Technical Report gives guidance on the use of conformity assessment procedures for industrial

piping in relation to EN 13480.
2 Normative references
Not applicable.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
responsible authority
competent organization which is independent of the manufacturer

Note 1 to entry: For application within the jurisdiction of the European Union this organization may be a

Notified Body or a user inspectorate where appropriate, according to module chosen and designated by a member

state. For the purpose of this standard, all these organizations have been collectively termed “responsible

authorities”.
3.2
fluid
gases, liquids and vapours in pure phase as well as mixtures thereof
Note 1 to entry: A fluid may contain a suspension of solids.
4 Application of the PED
4.1 General

According to the PED, the manufacturer shall determine for each industrial piping and pipeline:

a) the category of the industrial piping and pipeline;

b) the procedures to be applied to assess conformity of the industrial piping and pipeline with the

requirements of the PED.
4.2 Conformity assessment procedures
4.2.1 General

The manufacturer shall subject each item of equipment to a procedure to assess the conformity with the

essential requirements of the PED. Annex A describes the conformity assessment requirements of the

PED. It is applicable to piping systems which are to be installed in an EU Member State.

4.2.2 Choice of conformity assessment procedures

The conformity assessment procedures to be applied to an item or pressure equipment with a view to

affixing the CE marking shall be determined by the category in which the equipment is classified. The

procedures that are to be applied for the various categories are given in Table A.1.

The manufacturer has the option of selecting between a procedure of conformity assessment involving

a certified quality assurance system (if available) and one which does not.

The manufacturer may choose to apply one of the procedures which apply to a higher category.

---------------------- Page: 6 ----------------------
SIST-TP CEN/TR 13480-7:2018
CEN/TR 13480-7:2017 (E)

4.2.3 Conformity assessment procedures and the involvement of Responsible Authorities

The manufacturer is responsible for ensuring that the requirements of this Technical Report, including

inspection and testing activities, are fully applied. If a CE marking is sought, it is a requirement of the

PED that (in many cases) there is a supplementary involvement of a Responsible Authority (e.g. Notified

Body) to ensure the requirements of the PED are met.

The kind and extent of responsible authority involvement in inspection and testing activities will

depend upon the conformity assessment procedure chosen by the manufacturer. For each appropriate

conformity assessment procedure the participation is indicated in Table B.1.

Annex B has been provided in order to give guidance to the manufacturer so that he may be aware of

the various stages where a responsible authority may be involved. Details of the inspection and testing

activities are described in subsequent subclauses, the reference of which is given in Table B.1.

5 Subcontracting

The manufacturer is responsible for the fabrication and the installation, even if this work will be

subcontracted to other fabricators and/or installers.

Where the manufacturer is producing the equipment under a conformity assessment procedure

requiring intervention of a responsible authority, the manufacturer shall inform the responsible

authority of his intention to subcontract so that the responsible authority has the opportunity to take

part in the subcontractor surveillance.

Where the manufacturer is producing the equipment under a conformity assessment procedure based

on quality assurance, e.g. D, H, H1, the controls the manufacturer applies over subcontractors shall be

described in his appropriate quality system.
---------------------- Page: 7 ----------------------
SIST-TP CEN/TR 13480-7:2018
CEN/TR 13480-7:2017 (E)
Annex A
(informative)
Conformity of industrial piping to the essential safety requirements of
Directive 2014/68/EU (Pressure equipment directive)
A.1 Introduction

This annex describes the conformity assessment requirements of Directive 2014/68/EU. It is applicable

to piping systems which are to be installed in an EU Member State.

In the EU Member States, the authorized inspection bodies are identical to the notified bodies.

A.2 Conformity assessment procedure

Where piping is subject to the conformity assessment procedure, the manufacturer shall identify the

appropriate piping category based upon the classification of the piping as defined in EN 13480-1:2017,

Table 5.1-1, and subsequently shall select one of the conformity assessment modules available for that

piping category in accordance with Table A.1.

NOTE The conformity assessment procedure attributed to a higher category can be applied to piping

classified in a lower category.

The activities to be performed by the parties involved in each of the conformity assessment procedures

during design and fabrication/installation of the piping in accordance with this European Standard are

summarized in Annex B.
Table A.1 — Piping categories and conformity assessment modules
Category Category Conformity assessment module Conformity assessment module
(PED) (EN 13480–1) considered in EN 13480 not considered in EN 13480
— 0 — —
III III B (design type)+D, B (design B (production type)+E, B
type)+F, H (production type)+C2
II II A2, D1 E1
I I A —

If the manufacturer selected a module applicable to PED Category IV, the following applies:

If module G is selected, the columns for B (design type) and F in Table B.2 shall be used.

If module H1 is selected, the columns H (without the requirements DESIGN) and B (design type) in Table B.2 shall be

used.

1) For intervention of user inspectorates, see Article 16 of Directive 2014/68/EU (Pressure Equipment Directive).

---------------------- Page: 8 ----------------------
SIST-TP CEN/TR 13480-7:2018
CEN/TR 13480-7:2017 (E)
A.3 Certification and CE marking
A.3.1 Decl
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.