SIST EN 61000-4-34:2007/A1:2009
(Amendment)Electromagnetic compatibility (EMC) -- Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase
Electromagnetic compatibility (EMC) -- Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase
The contents of the corrigendum of October 2009 have been included in this copy.
Elektromagnetische Verträglichkeit (EMV) -- Teil 4-34: Prüf- und Messverfahren - Prüfungen der Störfestigkeit von Geräten und Einrichtungen mit einem Eingangsstrom > 16 A je Leiter gegen Spannungseinbrüche, Kurzzeitunterbrechungen und Spannungsschwankungen
Compatibilité électromagnétique (CEM) -- Partie 4-34: Techniques d'essai et de mesure - Essais d'immunité aux creux de tension, coupures brèves et variations de tension pour matériel ayant un courant appelé de plus de 16 A par phase
Le contenu du corrigendum d'octobre 2009 a été pris en considération dans cet exemplaire.
Elektromagnetna združljivost (EMC) - 4-34. del: Preskusne in merilne tehnike - Preskusi odpornosti opreme z vhodnim tokom, večjim od 16 A na fazo, proti upadom napetosti, kratkim prekinitvam in nihanju napetosti (IEC 61000-4-34:2005/A1:2009)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61000-4-34:2007/A1:2009
01-november-2009
(OHNWURPDJQHWQD]GUXåOMLYRVW (0& GHO 3UHVNXVQHLQPHULOQHWHKQLNH
3UHVNXVLRGSRUQRVWLRSUHPH]YKRGQLPWRNRPYHþMLPRG$QDID]RSURWL
XSDGRPQDSHWRVWLNUDWNLPSUHNLQLWYDPLQQLKDQMXQDSHWRVWL ,(&
$
Electromagnetic compatibility (EMC) -- Part 4-34: Testing and measurement techniques -
Voltage dips, short interruptions and voltage variations immunity tests for equipment with
input current more than 16 A per phase
Elektromagnetische Verträglichkeit (EMV) -- Teil 4-34: Prüf- und Messverfahren -
Prüfungen der Störfestigkeit von Geräten und Einrichtungen mit einem Eingangsstrom >
16 A je Leiter gegen Spannungseinbrüche, Kurzzeitunterbrechungen und
Spannungsschwankungen
Compatibilité électromagnétique (CEM) -- Partie 4-34: Techniques d'essai et de mesure -
Essais d'immunité aux creux de tension, coupures brèves et variations de tension pour
matériel ayant un courant appelé de plus de 16 A par phase
Ta slovenski standard je istoveten z: EN 61000-4-34:2007/A1:2009
ICS:
33.100.20 Imunost Immunity
SIST EN 61000-4-34:2007/A1:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61000-4-34:2007/A1:2009
---------------------- Page: 2 ----------------------
SIST EN 61000-4-34:2007/A1:2009
EUROPEAN STANDARD
EN 61000-4-34/A1
NORME EUROPÉENNE
August 2009
EUROPÄISCHE NORM
ICS 33.100.20
English version
Electromagnetic compatibility (EMC) -
Part 4-34: Testing and measurement techniques -
Voltage dips, short interruptions and voltage variations immunity tests
for equipment with mains current more than 16 A per phase
(IEC 61000-4-34:2005/A1:2009)
Compatibilité électromagnétique (CEM) - Elektromagnetische
Partie 4-34: Techniques d'essai Verträglichkeit (EMV) -
et de mesure - Teil 4-34: Prüf- und Messverfahren -
Essais d'immunité aux creux de tension, Prüfungen der Störfestigkeit
coupures brèves et variations de tension von Geräten und Einrichtungen
pour matériel ayant un courant mit einem Netzstrom > 16 A je Leiter
d'alimentation de plus de 16 A par phase gegen Spannungseinbrüche,
(CEI 61000-4-34:2005/A1:2009) Kurzzeitunterbrechungen
und Spannungsschwankungen
(IEC 61000-4-34:2005/A1:2009)
This amendment A1 modifies the European Standard EN 61000-4-34:2007; it was approved by CENELEC on
2009-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61000-4-34:2007/A1:2009 E
---------------------- Page: 3 ----------------------
SIST EN 61000-4-34:2007/A1:2009
EN 61000-4-34:2007/A1:2009 - 2 -
Foreword
The text of document 77A/670/CDV, future amendment 1 to IEC 61000-4-34:2005, prepared by SC 77A,
Low frequency phenomena, of IEC TC 77, Electromagnetic compatibility, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 61000-4-34:2007
on 2009-07-01.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
(dop) 2010-04-01
an identical national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2012-07-01
with the amendment have to be withdrawn
__________
Endorsement notice
The text of amendment 1:2009 to the International Standard IEC 61000-4-34:2005 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________
---------------------- Page: 4 ----------------------
SIST EN 61000-4-34:2007/A1:2009
IEC 61000-4-34
®
Edition 1.0 2009-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
BASIC EMC PUBLICATION
PUBLICATION FONDAMENTALE EN CEM
AMENDMENT 1
AMENDEMENT 1
Electromagnetic compatibility (EMC) –
Part 4-34: Testing and measurement techniques – Voltage dips, short
interruptions and voltage variations immunity tests for equipment with mains
current more than 16 A per phase
Compatibilité électromagnétique (CEM) –
Partie 4-34: Techniques d'essai et de mesure – Essais d'immunité aux creux de
tension, coupures brèves et variations de tension pour matériel ayant un
courant d’alimentation de plus de 16 A par phase
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
J
CODE PRIX
ICS 33.100.20 ISBN 2-8318-1041-5
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 5 ----------------------
SIST EN 61000-4-34:2007/A1:2009
– 2 – 61000-4-34 Amend. 1 © IEC:2009
FOREWORD
This amendment has been prepared by subcommittee 77A: Low frequency phenomena, of
IEC technical committee 77: Electromagnetic compatibility.
The text of this amendment is based on the following documents:
Enquiry draft Report on voting
77A/670/CDV 77A/688/RVC
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the maintenance result date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
Main title
Replace the part title on the cover page, the title page, above the Foreword and the Scope by
the following:
Part 4-34: Testing and measurement techniques –
Voltage dips, short interruptions and voltage variations immunity tests
for equipment with mains current more than 16 A per phase
1 Scope
Replace the entire second paragraph of the scope by the following:
This standard applies to electrical and electronic equipment having a rated mains current
exceeding 16 A per phase. (See Annex E for guidance on electrical and electronic equipment
rated at more than 200 A per phase.) It covers equipment installed in residential areas as well
as industrial machinery, specifically voltage dips and short interruptions for equipment
connected to either 50 Hz or 60 Hz a.c. networks, including 1-phase and 3-phase mains.
NOTE 1 Equipment with a rated mains current of 16 A or less per phase is covered by publication IEC 61000-4-11.
NOTE 2 There is no upper limit on rated mains current in this publication. However, in some countries, the rated
mains current may be limited to some upper value, for example 75 A or 250 A, because of mandatory safety
standards.
3.6 rated input voltage
Delete this term and definition and renumber the following terms and definitions accordingly.
---------------------- Page: 6 ----------------------
SIST EN 61000-4-34:2007/A1:2009
61000-4-34 Amend. 1 © IEC:2009 – 3 –
5 Test levels
Modify the first sentence as follows:
The voltages in this standard use the rated voltage for the equipment as a basis for voltage
test level specification (U ).
T
5.1 Voltage dips and short interruptions
Delete the last two paragraphs before Table 1, beginning with “Shorter durations in the
table…”, and ending with “…after the voltage dip.”
Table 1 – Preferred test level and durations for voltage dips
Replace the existing Table 1 by the following new Table 1:
a
Test level and durations for voltage dips (t ) (50 Hz/60 Hz)
Classes
s
Class 1 Case-by-case according to the equipment requirements
70 % during
Class 2 0 % during 1 cycle
c
25/30 cycles
d
70 % during 80 % during
40 % during
Class 3 0 % during 1 cycle
c c
c
25/30 cycles 250/300 cycles
10/12 cycles
b
X X X X
Class X
a
Classes as per IEC 61000-2-4; see Annex B.
b
To be defined by product committee. For equipment connected directly or indirectly to public network, the levels
must not be less severe than class 2.
c
"25/30 cycles" means "25 cycles for 50 Hz test" and "30 cycles for 60 Hz test", “10/12 cycles” means “10 cycles
for 50 Hz test” and “12 cycles for 60 Hz test” and “250/300 cycles” means “250 cycles for 50 Hz test” and “300
cycles for 60 Hz test”.
d
May be replaced by product committee with a test level of 50 % for equipment that is intended primarily for
200 V or 208 V nominal operation.
5.2 Voltage variations (optional)
Add the following paragraph immediately below Table 3:
For voltage variations in three-phase systems with or without neutral, all the three phases
shall be tested simultaneously. Simultaneous voltage variations in three-phase systems are
positioned at the zero-crossing of one of the voltages.
---------------------- Page: 7 ----------------------
SIST EN 61000-4-34:2007/A1:2009
– 4 – 61000-4-34 Amend. 1 © IEC:2009
Table 4 – Generator specifications
Replace the existing Table 4 by the following new Table 4:
Output voltage at no load
As required in Table 1, ±5 % of residual voltage value
Voltage at the output of the generator during equipment As required in Table 1, ±10 % of residual voltage value,
test measured as r.m.s. value refre
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.