Chemicals used for treatment of water intended for human consumption - Sodium hexafluorosilicate

This document is applicable to sodium hexafluorosilicate used for treatment of water intended for human consumption. It describes the characteristics of sodium hexafluorosilicate and specifies the requirements and the corresponding test methods for sodium hexafluorosilicate. It gives information on its use in water treatment. It also determines the rules relating to safe handling and use of sodium hexafluorosilicate (see Annex B).

Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch - Natriumhexafluorsilikat

Dieses Dokument gilt für Natriumhexafluorsilikat zur Aufbereitung von Wasser für den menschlichen Gebrauch. Es beschreibt die Eigenschaften von Natriumhexafluorsilikat und legt die Anforderungen sowie die entsprechenden Prüfverfahren für Natriumhexafluorsilikat fest. Es enthält Angaben zu dessen Anwendung in der Wasseraufbereitung. Es legt darüber hinaus Regeln für die sichere Handhabung und Verwendung von Natriumhexafluorsilikat fest (siehe Anhang B).

Produits chimiques utilisés pour le traitement de l'eau destinée à la consommation humaine - Hexafluorosilicate de sodium

Le présent document s’applique à l’hexafluorosilicate de sodium utilisé pour le traitement de l’eau destinée à la consommation humaine. Il décrit les caractéristiques de l’hexafluorosilicate de sodium et spécifie les exigences et les méthodes d’essai correspondant à ce produit. Il donne des informations pour son emploi dans le traitement de l’eau. Il fixe également les règles

Kemikalije, ki se uporabljajo za pripravo pitne vode - Natrijev heksafluorosilikat

Ta dokument obravnava natrijev heksafluorosilikat, ki se uporablja za pripravo pitne vode. Opisuje značilnosti natrijevega heksafluorosilikata ter določa zahteve in ustrezne preskusne metode zanj. Podaja informacije za njegovo uporabo pri pripravi vode. Določa tudi pravila za varno ravnanje z natrijevim heksafluorosilikatom in njegovo uporabo (glej dodatek B).

General Information

Status
Published
Public Enquiry End Date
19-Jul-2020
Publication Date
08-Jun-2022
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
08-Jun-2022
Due Date
13-Aug-2022
Completion Date
09-Jun-2022

Relations

Buy Standard

Standard
EN 12174:2022 - BARVE
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 12174:2020 - BARVE
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12174:2022
01-julij-2022
Nadomešča:
SIST EN 12174:2014
Kemikalije, ki se uporabljajo za pripravo pitne vode - Natrijev heksafluorosilikat
Chemicals used for treatment of water intended for human consumption - Sodium
hexafluorosilicate
Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch -
Natriumhexafluorsilikat
Produits chimiques utilisés pour le traitement de l'eau destinée à la consommation
humaine - Hexafluorosilicate de sodium
Ta slovenski standard je istoveten z: EN 12174:2022
ICS:
13.060.20 Pitna voda Drinking water
71.100.80 Kemikalije za čiščenje vode Chemicals for purification of
water
SIST EN 12174:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 12174:2022

---------------------- Page: 2 ----------------------
SIST EN 12174:2022


EN 12174
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2022
EUROPÄISCHE NORM
ICS 71.100.80 Supersedes EN 12174:2013
English Version

Chemicals used for treatment of water intended for human
consumption - Sodium hexafluorosilicate
Produits chimiques utilisés pour le traitement de l'eau Produkte zur Aufbereitung von Wasser für den
destinée à la consommation humaine - menschlichen Gebrauch - Natriumhexafluorsilikat
Hexafluorosilicate de sodium
This European Standard was approved by CEN on 27 March 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12174:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 12174:2022
EN 12174:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Description . 5
4.1 Identification . 5
4.2 Commercial form . 6
4.3 Physical properties . 6
4.4 Chemical properties . 7
5 Purity criteria . 7
5.1 General. 7
5.2 Composition of commercial product . 7
5.3 Impurities and main by-products . 7
5.4 Chemical parameters. 8
6 Test methods . 9
6.1 Sampling . 9
6.2 Analyses. 9
7 Labelling - Transportation - Storage . 14
7.1 Means of delivery . 14
7.2 Labelling according to the EU legislation . 14
7.3 Transportation regulations and labelling . 15
7.4 Marking . 16
7.5 Storage . 16
Annex A (informative) General information on sodium hexafluorosilicate . 17
Annex B (normative) General rules relating to safety . 18
Bibliography . 19
2

---------------------- Page: 4 ----------------------
SIST EN 12174:2022
EN 12174:2022 (E)
European foreword
This document (EN 12174:2022) has been prepared by Technical Committee CEN/TC 164 “Water
supply”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2022, and conflicting national standards
shall be withdrawn at the latest by November 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12174:2013.
In comparison with the previous edition, the following technical modifications have been made:
a) Modification of 7.3 on transportation regulations and labelling, adding the sentence “The user shall
be aware of the incompatibilities between transported products.”;
b) Modification of 7.4 on marking. The requirements of marking are also applied to the accompanying
documents.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
3

---------------------- Page: 5 ----------------------
SIST EN 12174:2022
EN 12174:2022 (E)
Introduction
In respect of potential adverse effects on the quality of water intended for human consumption caused
by the product covered by this document:
a) this document provides no information as to whether the product may be used without restriction
in any of the Member States of the EU or EFTA;
b) it should be noted that, while awaiting the adoption of verifiable European criteria, existing national
regulations concerning the use and/or the characteristics of this product remain in force.
NOTE Conformity with this document does not confer or imply acceptance or approval of the product in any
of the Member States of the EU or EFTA. The use of the product covered by this document is subject to regulation
or control by National Authorities (see Annex A).
4

---------------------- Page: 6 ----------------------
SIST EN 12174:2022
EN 12174:2022 (E)
1 Scope
This document is applicable to sodium hexafluorosilicate used for treatment of water intended for
human consumption. It describes the characteristics of sodium hexafluorosilicate and specifies the
requirements and the corresponding test methods for sodium hexafluorosilicate. It gives information on
its use in water treatment. It also determines the rules relating to safe handling and use of sodium
hexafluorosilicate (see Annex B).
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN ISO 3696:1995, Water for analytical laboratory use - Specification and test methods (ISO 3696:1987)
ISO 3165, Sampling of chemical products for industrial use — Safety in sampling
ISO 4281, Sodium hexafluorosilicate for industrial use — Determination of free acidity and total
hexafluorosilicate content — Titrimetric method
ISO 4793, Laboratory sintered (fritted) filters — Porosity grading, classification and designation
ISO 5444, Sodium fluorosilicate for industrial use — Determination of loss in mass at 105 degrees C
ISO 5993, Sodium hydroxide for industrial use — Determination of mercury content — Flameless atomic
absorption spectrometric method
ISO 6206, Chemical products for industrial use — Sampling — Vocabulary
ISO 6353-1, Reagents for chemical analysis — Part 1: General test methods
ISO 8213, Chemical products for industrial use — Sampling techniques — Solid chemical products in the
form of particles varying from powders to coarse lumps
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at https://www.electropedia.org/
4 Description
4.1 Identification
4.1.1 Chemical name
Disodium hexafluorosilicate.
4.1.2 Synonym or commons name
Sodium silicofluoride, sodium hexafluorosilicate.
5

---------------------- Page: 7 ----------------------
SIST EN 12174:2022
EN 12174:2022 (E)
4.1.3 Relative molecular mass
188,055.
4.1.4 Empirical formula
Na SiF .
2 6
4.1.5 Chemical formula
Na SiF .
2 6
1
4.1.6 CAS-Registry Number
16893-85-9.
2
4.1.7 EINECS reference
240-934-8.
4.2 Commercial form
The product is a crystalline powder.
4.3 Physical properties
4.3.1 Appearance and odour
The product is a colourless, odourless fine crystalline powder.
4.3.2 Density
3
The particle density of the crystals is 2,8 g/cm at 20 °C.
3
The bulk density of the product is approximately 1,5 g/cm at 20 °C.
4.3.3 Solubility
The solubility of the product in water is 7 g/l at 20 °C.
4.3.4 Vapour pressure
Not applicable.
3

4.3.5 Boiling point at 100 kPa
Not applicable.
4.3.6 Crystallization point
The product melts above 500 °C.
4.3.7 Specific heat
Not known.

1
Chemical Abstracts Service Registry Number.
2
European Inventory of Existing Commercial Chemical Substances.
3
100 kPa = 1 bar.
6

---------------------- Page: 8 ----------------------
SIST EN 12174:2022
EN 12174:2022 (E)
4.3.8 Viscosity dynamic
Not applicable.
4.3.9 Critical temperature
Not applicable.
4.3.10 Critical pressure
Not applicable.
4.3.11 Physical hardness
Not applicable.
4.4 Chemical properties
The pH value of a saturated aqueous solution (7 g/l) of sodium hexafluorosilicate is approximately 10.
Sodium hexafluorosilicate reacts with acids to form hydrofluoric acid. For additional information on
sodium hexafluorosilicate, see Annex A.
5 Purity criteria
5.1 General
This document specifies the minimum purity requirements for sodium hexafluorosilicate used for the
treatment of water intended for human consumption. Limits are given for impurities commonly present
in the product. Depending on the raw material and the manufacturing process, other impurities may be
present and, if so, this shall be notified to the user and when necessary to relevant authorities.
The national regulations allow users to clarify whether the product is of appropriate purity for the
treatment of water intended for human consumption, taking into account raw water quality, required
dosage, contents of other impurities and additives used in the product and not stated in this document.
Limits have been given for impurities and chemicals parameters where these are likely to be present in
significant quantities from the current production process and raw materials. If the production process
or raw materials lead to significant quantities of impurities, by-products or additives being present, this
shall be notified to the user.
5.2 Composition of commercial product
The content of sodium hexafluorosilicate shall not be less than a mass fraction of 98 % (Na SiF ).
2 6
The concentration of sodium hexafluorosilicate shall be within ± 5 % of the manufacturer's declared
value.
5.3 Impurities and main by-products
The product shall conform to the requirements specified in Table 1.
7

---------------------- Page: 9 ----------------------
SIST EN 12174:2022
EN 12174:2022 (E)
Table 1 — Impurities
Impurity Limit
 in mass fraction in % of
commercial product
Water – insoluble matter max. 0,5
Moisture max. 0,3
5.4 Chemical parameters
The product shall conform to the requirements specified in Table 2.
Table 2 — Chemical parameters
Parameter Limit
 mg/kg of commercial
product

Ant
...

SLOVENSKI STANDARD
oSIST prEN 12174:2020
01-julij-2020
Kemikalije, ki se uporabljajo za pripravo pitne vode - Natrijev heksafluorosilikat
Chemicals used for treatment of water intended for human consumption - Sodium
hexafluorosilicate
Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch -
Natriumhexafluorsilikat
Produits chimiques utilisés pour le traitement de l'eau destinée à la consommation
humaine - Hexafluorosilicate de sodium
Ta slovenski standard je istoveten z: prEN 12174
ICS:
13.060.20 Pitna voda Drinking water
71.100.80 Kemikalije za čiščenje vode Chemicals for purification of
water
oSIST prEN 12174:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 12174:2020

---------------------- Page: 2 ----------------------
oSIST prEN 12174:2020


DRAFT
EUROPEAN STANDARD
prEN 12174
NORME EUROPÉENNE

EUROPÄISCHE NORM

May 2020
ICS 71.100.80 Will supersede EN 12174:2013
English Version

Chemicals used for treatment of water intended for human
consumption - Sodium hexafluorosilicate
Produits chimiques utilisés pour le traitement de l'eau Produkte zur Aufbereitung von Wasser für den
destinée à la consommation humaine - menschlichen Gebrauch - Natriumhexafluorsilikat
Hexafluorosilicate de sodium
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 164.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12174:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 12174:2020
prEN 12174:2020 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Description . 5
4.1 Identification . 5
4.2 Commercial form . 6
4.3 Physical properties . 6
4.4 Chemical properties . 7
5 Purity criteria . 7
5.1 General. 7
5.2 Composition of commercial product . 7
5.3 Impurities and main by-products . 7
5.4 Chemical parameters. 8
6 Test methods . 8
6.1 Sampling . 8
6.2 Analyses. 8
7 Labelling - Transportation - Storage . 14
7.1 Means of delivery . 14
7.2 Labelling according to the EU legislation . 14
7.3 Transportation regulations and labelling . 14
7.4 Marking . 15
7.5 Storage . 15
Annex A (informative) General information on sodium hexafluorosilicate . 16
Annex B (normative) General rules relating to safety . 17
Bibliography . 18
2

---------------------- Page: 4 ----------------------
oSIST prEN 12174:2020
prEN 12174:2020 (E)
European foreword
This document (prEN 12174:2020) has been prepared by Technical Committee CEN/TC 164 “Water
supply”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 12174:2013.
In comparison with the previous edition, the following technical modifications have been made:
a) Modification of 7.3 on transportation regulations and labelling, adding the sentence “The user must
be aware of the incompatibilities between transported products.”;
b) Modification of 7.4 on marking. The requirements of marking are also applied to the accompanying
documents.
3

---------------------- Page: 5 ----------------------
oSIST prEN 12174:2020
prEN 12174:2020 (E)
Introduction
In respect of potential adverse effects on the quality of water intended for human consumption caused
by the product covered by this document:
a) this document provides no information as to whether the product may be used without restriction
in any of the Member States of the EU or EFTA;
b) it should be noted that, while awaiting the adoption of verifiable European criteria, existing national
regulations concerning the use and/or the characteristics of this product remain in force.
NOTE Conformity with this document does not confer or imply acceptance or approval of the product in any
of the Member States of the EU or EFTA. The use of the product covered by this document is subject to regulation
or control by National Authorities.
4

---------------------- Page: 6 ----------------------
oSIST prEN 12174:2020
prEN 12174:2020 (E)
1 Scope
This document is applicable to sodium hexafluorosilicate used for treatment of water intended for
human consumption. It describes the characteristics of sodium hexafluorosilicate and specifies the
requirements and the corresponding test methods for sodium hexafluorosilicate. It gives information on
its use in water treatment. It also determines the rules relating to safe handling and use of sodium
hexafluorosilicate (see Annex B).
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN ISO 3696:1995, Water for analytical laboratory use — Specification and test methods (ISO 3696:1987)
ISO 3165, Sampling of chemical products for industrial use — Safety in sampling
ISO 4281, Sodium hexafluorosilicate for industrial use — Determination of free acidity and total
hexafluorosilicate content — Titrimetric method
ISO 4793, Laboratory sintered (fritted) filters — Porosity grading, classification and designation
ISO 5444, Sodium fluorosilicate for industrial use — Determination of loss in mass at 105 degrees C
ISO 5993, Sodium hydroxide for industrial use — Determination of mercury content — Flameless atomic
absorption spectrometric method
ISO 6206, Chemical products for industrial use — Sampling — Vocabulary
ISO 6353-1, Reagents for chemical analysis — Part 1: General test methods
ISO 8213, Chemical products for industrial use — Sampling techniques — Solid chemical products in the
form of particles varying from powders to coarse lumps
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at https://www.electropedia.org/
4 Description
4.1 Identification
4.1.1 Chemical name
Disodium hexafluorosilicate.
4.1.2 Synonym or commons name
Sodium silicofluoride, sodium hexafluorosilicate.
5

---------------------- Page: 7 ----------------------
oSIST prEN 12174:2020
prEN 12174:2020 (E)
4.1.3 Relative molecular mass
188,055.
4.1.4 Empirical formula
Na SiF .
2 6
4.1.5 Chemical formula
Na SiF .
2 6
1
4.1.6 CAS-Registry Number
16893-85-9.
2
4.1.7 EINECS reference
240-934-8.
4.2 Commercial form
The product is a crystalline powder.
4.3 Physical properties
4.3.1 Appearance and odour
The product is a colourless, odourless fine crystalline powder.
4.3.2 Density
3
The particle density of the crystals is 2,8 g/cm at 20 °C.
3
The bulk density of the product is approximately 1,5 g/cm at 20 °C.
4.3.3 Solubility
The solubility of the product in water is 7 g/l at 20 °C.
4.3.4 Vapour pressure
Not applicable.
3
4.3.5 Boiling point at 100 kPa
Not applicable.
4.3.6 Crystallization point
The product melts above 500 °C.
4.3.7 Specific heat
Not known.
4.3.8 Viscosity dynamic
Not applicable.

1
Chemical Abstracts Service Registry Number.
2
European Inventory of Existing Commercial Chemical Substances.
3
100 kPa = 1 bar.
6

---------------------- Page: 8 ----------------------
oSIST prEN 12174:2020
prEN 12174:2020 (E)
4.3.9 Critical temperature
Not applicable.
4.3.10 Critical pressure
Not applicable.
4.3.11 Physical hardness
Not applicable.
4.4 Chemical properties
The pH value of a saturated aqueous solution (7 g/l) of sodium hexafluorosilicate is approximately 10.
Sodium hexafluorosilicate reacts with acids to form hydrofluoric acid. For additional information on
sodium hexafluorosilicate, see Annex A.
5 Purity criteria
5.1 General
This document specifies the minimum purity requirements for sodium hexafluorosilicate used for the
treatment of water intended for human consumption. Limits are given for impurities commonly present
in the product. Depending on the raw material and the manufacturing process, other impurities may be
present and, if so, this shall be notified to the user and when necessary to relevant authorities.
The national regulations allow users to clarify whether the product is of appropriate purity for the
treatment of water intended for human consumption, taking into account raw water quality, required
dosage, contents of other impurities and additives used in the product and not stated in this document.
Limits have been given for impurities and chemicals parameters where these are likely to be present in
significant quantities from the current production process and raw materials. If the production process
or raw materials lead to significant quantities of impurities, by-products or additives being present, this
shall be notified to the user.
5.2 Composition of commercial product
The content of sodium hexafluorosilicate shall not be less than a mass fraction of 98 % (Na SiF ).
2 6
The concentration of sodium hexafluorosilicate shall be within ± 5 % of the manufacturer's declared
value.
5.3 Impurities and main by-products
The product shall conform to the requirements specified in Table 1.
Table 1 — Impurities
Impurity Limit
 in mass fraction in % of
commercial product
Water – insoluble matter max. 0,5
Moisture max. 0,3
7

---------------------- Page: 9 ----------------------
oSIST prEN 12174:2020
prEN 12174:2020 (E)
5.4 Chemical parameters
The product shall conform to the requirements specified in Table 2.
Table 2 — Chemical parameters
Parameter Limit
 mg/kg of commercial
product

Antimony (Sb) max. 80
Arsenic (As) max. 400
Cadmium (Cd) max. 40
Chromium (Cr) max. 400
Lead (Pb) max. 400
Mercury (Hg) max. 10
Nickel (Ni) max. 400
Selenium (Se) max. 80
NOTE  Other chemical parameters and indicator parameters
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.