Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) (IEC 61300-2-1:2009)

This part of IEC 61300 evaluates the effects of vibration on fibre optic devices at the predominant frequency ranges and magnitudes that may be encountered during field service. NOTE Most vibrations encountered in service are not of a simple harmonic nature. However, it has been shown that tests based on vibrations of this type are satisfactory to simulating actual service.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-1: Prüfungen - Schwingprüfung (sinusförmig) (IEC 61300-2-1:2009)

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-1: Essais - Vibrations (sinusoïdales) (CEI 61300-2-1:2009)

La CEI 61300-2-1:2009 évalue les effets des vibrations sur les dispositifs à fibres optiques pour des plages et des amplitudes de fréquences prépondérantes qui peuvent être rencontrées pendant l'intervention sur site. Les changements par rapport à l'édition précédente concernent la reconsidération de la sévérité de l'essai, ainsi que la structure de cette norme.

Optični spojni elementi in pasivne komponente - Postopki osnovnega preskušanja in merjenja - 2-1. del: Testi - Vibracija (sinusoidna) (IEC 61300-2-1:2009)

Ta del IEC 61300 vrednoti učinke vibracije na optične elemente pri prevladujočih razponih frekvenc in magnitudah, na katere je mogoče naleteti med opravljanjem storitev na terenu. OPOMBA: Večina vibracij, na katere naletimo med opravljanjem storitev, ni preproste harmonične narave. Vendar je bilo dokazano, da so testi, osnovani na tem tipu vibracij, zadovoljivi za simuliranje dejanske storitve.

General Information

Status
Withdrawn
Publication Date
15-Dec-2009
Withdrawal Date
10-Mar-2024
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
11-Mar-2024
Due Date
03-Apr-2024
Completion Date
11-Mar-2024

Relations

Buy Standard

Standard
EN 61300-2-1:2010 - BARVE
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-2-1:2010
01-januar-2010
1DGRPHãþD
SIST EN 61300-2-1:2004
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH3RVWRSNLRVQRYQHJDSUHVNXãDQMD
LQPHUMHQMDGHO7HVWL9LEUDFLMD VLQXVRLGQD  ,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) (IEC 61300-2-1:2009)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-1: Prüfungen - Schwingprüfung (sinusförmig) (IEC 61300-2-
1:2009)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 2-1: Essais - Vibrations (sinusoïdales)
(CEI 61300-2-1:2009)
Ta slovenski standard je istoveten z: EN 61300-2-1:2009
ICS:
17.160 Vibracije, meritve udarcev in Vibrations, shock and
vibracij vibration measurements
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-2-1:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61300-2-1:2010

---------------------- Page: 2 ----------------------

SIST EN 61300-2-1:2010

EUROPEAN STANDARD
EN 61300-2-1

NORME EUROPÉENNE
November 2009
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61300-2-1:2003


English version


Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 2-1: Tests -
Vibration (sinusoidal)
(IEC 61300-2-1:2009)


Dispositifs d'interconnexion  Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Méthodes fondamentales d'essais und passive Bauteile -
et de mesures - Grundlegende Prüf- und Messverfahren -
Partie 2-1: Essais - Teil 2-1: Prüfungen -
Vibrations (sinusoïdales) Schwingung (sinusförmig)
(CEI 61300-2-1:2009) (IEC 61300-2-1:2009)




This European Standard was approved by CENELEC on 2009-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-1:2009 E

---------------------- Page: 3 ----------------------

SIST EN 61300-2-1:2010
EN 61300-2-1:2009 - 2 -
Foreword
The text of document 86B/2862/FDIS, future edition 3 of IEC 61300-2-1, prepared by SC 86B, Fibre optic
interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-1 on 2009-10-01.
This European Standard supersedes EN 61300-2-1:2003.
Changes from EN 61300-2-1:2003 are to reconsider the severity and the structure of this standard.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-2-1:2009 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 61300-2-1:2010
- 3 - EN 61300-2-1:2009
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.