SIST EN IEC 61347-2-3:2025

Controlgear for electric light sources - Safety - Part 2-3: Particular requirements - AC or DC supplied electronic controlgear for fluorescent lamps (IEC 61347-2-3:2024)

IEC 61347-2-3:2024 is available as IEC 61347-2-3:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 61347-2-3:2024 specifies safety requirements for electronic controlgear for use on AC supplies at 50 Hz or 60 Hz up to 1 000 V or on DC supplies up to 1 000 V with lamp operating frequencies deviating from the supply frequency, associated with fluorescent lamps as specified in IEC 60081 and IEC 60901, low-pressure UV lamps, and other fluorescent lamps for high-frequency operation. This third edition cancels and replaces the second edition published in 2011 and Amendment 1:2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) introduction of dated references where appropriate;
b) clarification of sample item numbers;
c) alignment of clause numbers with those of IEC 61347-1.

Betriebsgeräte für elektrische Lichtquellen - Sicherheit - Teil 2-3: Besondere Anforderungen - wechsel- oder gleichstromversorgte elektronische Betriebsgeräte für Leuchtstofflampen (IEC 61347-2-3:2024)

Appareillages de commande pour les sources de lumière électriques - Sécurité - Partie 2-3: Exigences particulières - Appareillages électroniques alimentés en courant alternatif ou en courant continu pour lampes fluorescentes (IEC 61347-2-3:2024)

IEC 61347-2-3:2024 est disponible sous forme de IEC 61347-2-3:2024 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.

L'IEC 61347-2-3:2024 spécifie les exigences de sécurité des appareillages électroniques destinés à être utilisés avec des alimentations jusqu'à 1 000 V en courant alternatif à 50 Hz ou 60 Hz ou avec des alimentations jusqu'à 1 000 V en courant continu avec des fréquences de fonctionnement des lampes différentes de la fréquence du réseau d'alimentation, associés aux lampes fluorescentes spécifiées dans l'IEC 60081 et l'IEC 60901, à des lampes à infrarouge à basse pression et à d'autres lampes fluorescentes fonctionnant à haute fréquence. Cette troisième édition annule et remplace la deuxième édition parue en 2011 et l'Amendement 1:2016. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) ajout de références datées le cas échéant;
b) clarification des numéros d'entités d'échantillonnage;
c) alignement des numéros d'articles sur ceux de l'IEC 61347-1.

Stikalne naprave za sijalke - Varnost - 2-3. del: Posebne zahteve - Izmenično napajane elektronske predstikalne naprave za fluorescenčne sijalke (IEC 61347-2-3:2024)

General Information

• Status: Published
• Publication Date: 23-Dec-2024
• ICS: 29.130.01 - Switchgear and controlgear in general
• ICS: 29.140.99 - Other standards related to lamps
• Technical Committee: IESV - Lamps and related equipment
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 18-Dec-2024
• Due Date: 22-Feb-2025
• Completion Date: 24-Dec-2024
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Mandate: M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
• Ref Project: EN IEC 61347-2-3:2024 - Controlgear for electric light sources - Safety - Part 2-3: Particular requirements - AC or DC supplied electronic controlgear for fluorescent lamps

Relations

• Revised: SIST EN 61347-2-3:2011/AC:2012 - Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
• Effective Date: 28-Jul-2020
• Revises: SIST EN 61347-2-3:2011/A1:2017 - Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps (IEC 61347-2-3:2011/A1:2016)
• Effective Date: 28-Jul-2020
• Revises: SIST EN 61347-2-3:2011 - Lamp controlgear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
• Effective Date: 19-Mar-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2025
Stikalne naprave za sijalke - Varnost - 2-3. del: Posebne zahteve - Izmenično
napajane elektronske predstikalne naprave za fluorescenčne sijalke (IEC 61347-2-
3:2024)
Controlgear for electric light sources - Safety - Part 2-3: Particular requirements - AC or
DC supplied electronic controlgear for fluorescent lamps (IEC 61347-2-3:2024)
Betriebsgeräte für elektrische Lichtquellen - Sicherheit - Teil 2-3: Besondere
Anforderungen - wechsel- oder gleichstromversorgte elektronische Betriebsgeräte für
Leuchtstofflampen (IEC 61347-2-3:2024)
Appareillages de commande pour les sources de lumière électriques - Sécurité - Partie 2
-3: Exigences particulières - Appareillages électroniques alimentés en courant alternatif
ou en courant continu pour lampes fluorescentes (IEC 61347-2-3:2024)
Ta slovenski standard je istoveten z: EN IEC 61347-2-3:2024
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61347-2-3

NORME EUROPÉENNE
EUROPÄISCHE NORM December 2024
ICS 29.140.99 Supersedes EN 61347-2-3:2011; EN 61347-2-
3:2011/AC:2011; EN 61347-2-3:2011/A1:2017
English Version
Controlgear for electric light sources - Safety - Part 2-3:
Particular requirements - AC or DC supplied electronic
controlgear for fluorescent lamps
(IEC 61347-2-3:2024)
Appareillages de commande pour les sources de lumière Betriebsgeräte für elektrische Lichtquellen - Sicherheit -
électriques - Sécurité - Partie 2-3: Exigences particulières - Teil 2-3: Besondere Anforderungen - wechsel- oder
Appareillages électroniques alimentés en courant alternatif gleichstromversorgte elektronische Betriebsgeräte für
ou en courant continu pour lampes fluorescentes Leuchtstofflampen
(IEC 61347-2-3:2024) (IEC 61347-2-3:2024)
This European Standard was approved by CENELEC on 2024-10-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61347-2-3:2024 E

European foreword
The text of document 34C/1586/CDV, future edition 3 of IEC 61347-2-3, prepared by SC 34C
"Auxiliaries for lamps" of IEC/TC 34 "Lighting" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 61347-2-3:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-12-31
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-12-31
document have to be withdrawn
This document supersedes EN 61347-2-3:2011 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61347-2-3:2024 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60598-2-22 NOTE Approved as EN IEC 60598-2-22
IEC 61195:1999 NOTE Approved as EN 61195:1999 (not modified)
IEC 61195:1999/A1:2012 NOTE Approved as EN 61195:1999/A1:2013 (not modified)
IEC 61195:1999/A2:2014 NOTE Approved as EN 61195:1999/A2:2015 (not modified)
IEC 61199:2011 NOTE Approved as EN 61199:2011 (not modified)
IEC 61199:2011/A1:2012 NOTE Approved as EN 61199:2011/A1:2013 (not modified)
IEC 61199:2011/A2:2014 NOTE Approved as EN 61199:2011/A2:2015 (not modified)
IEC 61347-2-3:2011 NOTE Approved as EN 61347-2-3:2011 (not modified)
IEC 61347-2-3:2011/A1:2016 NOTE Approved as EN 61347-2-3:2011/A1:2017 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60081 1997 Double-capped fluorescent lamps - EN 60081 1998
Performance specifications
+ A1 (mod) 2000 + A1 2002
+ A2 2003 + A2 2003
+ A3 2005 + A3 2005
+ A4 2010 + A4 2010
+ A5 2013 + A5 2013
+ A6 (mod) 2017 + A6 2017
- - + A11 2018
IEC 60901 1996 Single-capped fluorescent lamps - Performance EN 60901 1996
specifications
+ A1 1997 + A1 1997
- - + A1:1997/corrig 1997
endum Oct.
+ A2 2000 + A2 2000
+ A3 2004 + A3 2004
+ A4 2007 + A4 2008
+ A5 2011 + A5 2012
+ A6 (mod) 2014 + A6 2017
IEC 60929 2011 AC and/or DC-supplied electronic control gear EN 60929 2011
for tubular fluorescent lamps - Performance
requirements
- - + AC 2011
+ A1 2015 + A1 2016
IEC 61347-1 2015 Lamp controlgear - Part 1: General and safety EN 61347-1 2015
requirements
+ A1 2017 + A1 2021
Publication Year Title EN/HD Year
IEC 61347-2-7 2011 Lamp controlgear - Part 2-7: Particular EN 61347-2-7 2012
requirements for battery supplied electronic
controlgear for emergency lighting (self-
contained)
+ A1 2017 + A1 2019
+ A2 2021 - -
IEC 61547 - Equipment for general lighting purposes - EMC EN IEC 61547 -
immunity requirements
IEC 61347-2-3 ®
Edition 3.0 2024-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Controlgear for electric light sources – Safety –

Part 2-3: Particular requirements – AC or DC supplied electronic controlgear for

fluorescent lamps
Appareillages de commande pour les sources de lumière électriques – Sécurité –

Partie 2-3: Exigences particulières – Appareillages électroniques alimentés en

courant alternatif ou en courant continu pour lampes fluorescentes

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99  ISBN 978-2-8322-8847-4

– 2 – IEC 61347-2-3:2024 © IEC 2024
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 General requirements . 9
5 General notes on tests . 10
6 Classification . 10
7 Marking . 10
7.1 Marking and information . 10
7.1.1 Mandatory marking . 10
7.1.2 Information to be provided . 10
7.2 Durability and legibility of markings . 10
7.3 Built-in controlgear . 10
8 Terminals . 11
9 Earthing . 11
10 Protection against accidental contact with live parts . 11
11 Moisture resistance and insulation . 11
12 Electric strength . 11
13 Thermal endurance test for windings of ballasts . 11
14 Fault conditions . 11
15 Protection of associated components. 11
15.1 Maximum allowed peak voltage under normal operation conditions . 11
15.2 Maximum working voltage under normal and abnormal operating conditions . 12
15.3 Maximum working voltage and rectifying effect . 12
15.4 Output voltage and abnormal conditions . 12
15.5 Isolation of input terminals of controllable electronic controlgear . 12
16 Abnormal conditions . 13
16.1 Abnormal conditions for AC and DC controlgear . 13
16.2 Additional abnormal conditions for DC supplied electronic controlgear . 13
17 Behaviour of the controlgear at end of lamp life . 14
17.1 End of lamp life effects . 14
17.2 Asymmetric pulse test . 14
17.3 Asymmetric power test . 16
17.4 Open filament test . 18
17.4.1 Selection . 18
17.4.2 Measurements to be carried out prior to test procedure A . 18
17.4.3 Test procedure A . 19
17.4.4 Test procedure B . 19
18 Construction . 21
19 Creepage distances and clearances . 21
20 Screws, current-carrying parts and connections . 21
21 Resistance to heat, fire and tracking . 21
22 Resistance to corrosion . 21

IEC 61347-2-3:2024 © IEC 2024 – 3 –
23 Applicable annexes of IEC 61347-1 . 22
Annex A (normative) Measurement of high-frequency leakage current . 27
Annex B (normative
...