oSIST prEN 12350-6:2026
(Main)Testing fresh concrete - Part 6: Density
- Abstract
This document specifies a method for determining the density of compacted fresh concrete both in the laboratory and in the field.
It may not be applicable to very stiff concrete which cannot be compacted by normal vibration.
- Status
- Not Published
- Public Enquiry End Date
- 30-Dec-2026
- Technical Committee
- BBB - Concrete, reinforced concrete and prestressed concrete
- Current Stage
- 4020 - Public enquire (PE) (Adopted Project)
- Start Date
- 02-Nov-2026
- Due Date
- 22-Mar-2027
Relations
- Effective Date
- 12-Nov-2025
Get Certified
Connect with accredited certification bodies for this standard

DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.

Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
oSIST prEN 12350-6:2026 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Testing fresh concrete - Part 6: Density". This standard covers: This document specifies a method for determining the density of compacted fresh concrete both in the laboratory and in the field. It may not be applicable to very stiff concrete which cannot be compacted by normal vibration.
This document specifies a method for determining the density of compacted fresh concrete both in the laboratory and in the field. It may not be applicable to very stiff concrete which cannot be compacted by normal vibration.
oSIST prEN 12350-6:2026 is classified under the following ICS (International Classification for Standards) categories: 91.100.30 - Concrete and concrete products. The ICS classification helps identify the subject area and facilitates finding related standards.
oSIST prEN 12350-6:2026 has the following relationships with other standards: It is inter standard links to SIST EN 12350-6:2019. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
oSIST prEN 12350-6:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2026
Preskušanje svežega betona - 6. del: Gostota
Testing fresh concrete - Part 6: Density
Prüfung von Frischbeton - Teil 6: Frischbetonrohdichte
Essais pour béton frais - Partie 6 : Masse volumique
Ta slovenski standard je istoveten z: prEN 12350-6
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2026
ICS 91.100.30 Will supersede EN 12350-6:2019
English Version
Testing fresh concrete - Part 6: Density
Essais pour béton frais - Partie 6 : Masse volumique Prüfung von Frischbeton - Teil 6: Frischbetonrohdichte
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 104.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye
and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
C O M I T É E U R O P É E N D E N O R M A L I S A T I O N
E U R O P Ä I S C H E S K O M I T E E F Ü R N O R M U N G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12350-6:2026 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Apparatus . 4
6 Sampling . 5
7 Procedure . 5
7.1 Calibration . 5
7.2 Mass of density container . 5
7.3 Filling the density container . 5
7.4 Compacting the concrete . 5
7.4.1 General. 5
7.4.2 Mechanical compaction . 6
7.4.3 Compacting by hand with compacting rod or bar . 6
7.5 Surface levelling . 6
7.6 Weighing . 6
8 Calculation of density . 6
9 Test report . 7
10 Precision . 7
Annex A (normative) Calibration of density container . 9
Bibliography . 10
European foreword
This document (prEN 12350-6:2026) has been prepared by Technical Committee CEN/TC 104 “Concrete
and related products”, the secretariat of which is held by SN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 12350-6:2019.
EN 12350-6:2019:
a) editorial revisions;
b) homogenization of maximum instrumental measurement uncertainty (EN 12350 series) for same
mass;
This document is one of a series on testing concrete.
EN 12350, Testing fresh concrete, consists in the following parts:
— Part 1: Sampling and common apparatus
— Part 2: Slump test
— Part 3: Vebe test
— Part 4: Degree of compactability
— Part 5: Flow table test
— Part 6: Density
— Part 7: Air content – Pressure methods
— Part 8: Self-compacting concrete – Slump-flow test
— Part 9: Self-compacting concrete – V-funnel test
— Part 10: Self-compacting concrete – L-box test
— Part 11: Self-compacting concrete – Sieve segregation test
— Part 12: Self-compacting concrete – J-ring test
— Part 13: Bleeding test – Static and pressure
— Part 14: Inverted cone flow time
— Part 15: Slump flow velocity
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
1 Scope
This document specifies a method for determining the density of compacted fresh concrete both in the
laboratory and in the field.
It may not be applicable to very stiff concrete which cannot be compacted by normal vibration.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 12350-1, Testing fresh concrete — Part 1: Sampling and common apparatus
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp/
— IEC Electropedia: available at https://www.electropedia.org/
4 Principle
Fresh concrete is compacted into a rigid and watertight container of known volume and mass and is then
weighed.
5 Apparatus
5.1 Common apparatus for fresh concrete testing.
The apparatus listed below for the execution of this test method shall be in accordance with the
specification given in EN 12350-1 and as specified below.
5.2 Density container, having the same specification and dimensions as the container specified in
EN 12350-1.
5.3 Filling frame, filling may be simplified by using a filling frame fitted tightly to the density container.
5.4 Means of compacting the concrete, which may be one of the following:
c) internal (poker) vibrator;
d) vibrating table;
e) compacting rod;
f) compacting bar.
5.5
...



