EN 14749:2016+A1:2022
(Main)Furniture - Domestic and kitchen storage units and kitchen-worktops - Safety requirements and test methods
Furniture - Domestic and kitchen storage units and kitchen-worktops - Safety requirements and test methods
This European Standard specifies safety requirements and test methods for all types of kitchen and bathroom storage units and domestic storage furniture and their components.
It does not apply to non-domestic storage, office storage, industrial storage, catering equipment, retail storage and industrial storage lockers.
It does not apply to units covered by EN 71 1, Safety of toys - Part 1: Mechanical and physical properties and EN 60065, Audio, video and similar electronic apparatus - Safety requirements (IEC 60065).
It does not include requirements for the resistance to ageing, degradation, flammability and electrical safety.
Safety that is dependent upon the structure of the building is not included, e.g. the strength of wall hanging units includes only the cabinet and its components including wall attachment devices. The wall and the wall attachments are not included.
Annex A (normative) contains additional test methods.
Annex B (informative) contains a guide to testing of units and components according to this document.
Annex C (informative) contains an example of loading of wall hanging units.
Annex D (informative) contains a method for calculation of vertical and horizontal acting forces.
Möbel - Wohn- und Küchenbehältnismöbel und Küchenarbeitsplatten - Sicherheitstechnische Anforderungen und Prüfverfahren
Diese Europäische Norm legt sicherheitstechnische Anforderungen und Prüfverfahren für alle Arten von Behältnismöbeln für Küchen, Bäder und den Wohnbereich sowie ihre Bauteile fest.
Sie gilt nicht für Behältnismöbel für den Nicht-Wohnbereich, Behältnismöbel für Büros, industrielle Behältnismöbel, Einrichtungen für Großküchen, Behältnismöbel für den Einzelhandel und verschließbare Behältnismöbel für den Industriebereich.
Sie gilt nicht für Behältnismöbel, die durch die Normen EN 71-1, Sicherheit von Spielzeug — Teil 1: Mechanische und physikalische Eigenschaften und EN 60065, Audio-, Video- und ähnliche elektronische Geräte — Sicherheitsanforderungen (IEC 60065) erfasst sind.
Sie enthält keine Anforderungen an die Alterungsbeständigkeit, Verwitterung, Entflammbarkeit und elektrische Sicherheit.
Sicherheit, die von der Gebäudekonstruktion abhängig ist, ist nicht einbezogen, z. B. schließt die Festigkeit von wandbefestigten Hängebehältnismöbeln nur das Behältnismöbel und seine Bauteile, einschließlich Schrankaufhänger, ein. Die Wand selbst und die wandseitigen Befestigungsmittel sind nicht einbezogen.
Anhang A (normativ) enthält zusätzliche Prüfverfahren.
Anhang B (informativ) enthält einen Leitfaden für die Prüfung von Behältnismöbeln und Bauteilen nach diesem Dokument.
Anhang C (informativ) enthält ein Beispiel für die Beladung von wandbefestigten Hängebehältnismöbeln.
Anhang D (informativ) enthält ein Berechnungsverfahren für vertikal und horizontal wirkende Kräfte.
Ameublement - Meubles de rangement domestiques et de cuisine et plans de travail de cuisine - Exigences de sécurité et méthodes dessai
La présente Norme européenne spécifie les exigences de sécurité et les méthodes d’essai applicables à tous les types de meubles de rangement de cuisine, de salle de bain, y compris leurs composants, à usage domestique.
Elle ne s’applique pas aux meubles de rangement à usage collectif, aux meubles de rangement de bureau, aux meubles de rangement à usage industriel, aux équipements de restauration, ni aux armoires de rangement à usage commercial ou industriel.
Elle ne s'applique pas aux éléments couverts par l’EN 71-1, Sécurité des jouets – Partie 1 : propriétés mécaniques et physiques, ni à ceux couverts par l’EN 60065, Appareils audio, vidéo et appareils électroniques analogues – Exigences de sécurité. (IEC 60065).
La sécurité qui dépend de la structure du bâtiment n'est pas prise en compte. Par exemple, la résistance des meubles accrochés au mur inclut seulement le meuble et ses composants, y compris les dispositifs de fixations au mur. Elle ne concerne pas le mur et les fixations murales.
La présente Norme ne comporte pas d’exigence relative à la résistance au vieillissement, à la dégradation, à l’inflammabilité, ni à la sécurité électrique.
L’Annexe A (normative) fournit des méthodes d’essai supplémentaires.
L’Annexe B (informative) fournit des lignes directrices pour réaliser les essais conformément au présent document.
L’Annexe C (informative) fournit un exemple de calcul de chargement pour les meubles accrochés au mur.
L’Annexe D (informative) fournit un exemple de calcul des forces horizontales et verticales.
L’Annexe A (normative) fournit des méthodes d’essai supplémentaires.
L’Annexe B (informative) fournit des lignes directrices pour réaliser les essais conformément au présent document.
L’Annexe C (informative) fournit un exemple de calcul de chargement pour les meubles accrochés au mur.
L’Annexe D (informative) fournit un exemple de calcul des forces horizontales et verticales.
Pohištvo - Shranjevalne enote za domačo uporabo in kuhinje ter kuhinjske delovne plošče - Varnostne zahteve in preskusne metode
Ta evropski standard določa varnostne zahteve in preskusne metode za vse vrste shranjevalnih enot za kuhinje in kopalnice ter shranjevalnega pohištva za domačo uporabo in njihove sestavne dele.
Ne uporablja se za shranjevalno pohištvo za javno rabo, shranjevalno pohištvo za pisarne, industrijsko shranjevalno pohištvo, opremo za pripravo in dostavo hrane, opremo trgovskih prostorov ter za omarice na zaklep.
Ne uporablja se za enote, ki jih obravnavata standarda EN 71-1, Varnost igrač – 1. del: Mehanske in fizikalne lastnosti, ter EN 60065, Avdio, video in podobni elektronski aparati – Varnostne zahteve (IEC 60065).
Ne vključuje zahtev za odpornost proti staranju, razpadu, vnetljivosti in električno varnost.
Varnost, odvisna od konstrukcije stavbe, ni vključena, npr. trdnost visečih enot na steni vključuje samo omarice in njihove sestavne dele, vključno s stenskimi pritrditvenimi napravami. Stene in stenski pritrditveni elementi niso vključeni.
Dodatek A (normativni) vsebuje dodatne preskusne metode.
Dodatek B (informativni) vsebuje navodila za preskušanje enot in sestavnih delov v skladu s tem dokumentom.
Dodatek C (informativni) vsebuje primer obremenitve za viseče enote na steni.
Dodatek D (informativni) vsebuje metodo za izračun navpično in vodoravno delujočih sil.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2022
Nadomešča:
SIST EN 14749:2016
Pohištvo - Shranjevalne enote za domačo uporabo in kuhinje ter kuhinjske
delovne plošče - Varnostne zahteve in preskusne metode
Furniture - Domestic and kitchen storage units and kitchen-worktops - Safety
requirements and test methods
Möbel - Wohn- und Küchenbehältnismöbel und Küchenarbeitsplatten -
Sicherheitstechnische Anforderungen und Prüfverfahren
Ameublement - Meubles de rangement domestiques et de cuisine et plans de travail de
cuisine - Exigences de sécurité et méthodes dessai
Ta slovenski standard je istoveten z: EN 14749:2016+A1:2022
ICS:
97.040.10 Kuhinjsko pohištvo Kitchen furniture
97.140 Pohištvo Furniture
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 14749:2016+A1
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2022
EUROPÄISCHE NORM
ICS 97.040.10; 97.140 Supersedes EN 14749:2016
English Version
Furniture - Domestic and kitchen storage units and
kitchen-worktops - Safety requirements and test methods
Ameublement - Meubles de rangement domestiques et Möbel - Wohn- und Küchenbehältnismöbel und
de cuisine et plans de travail de cuisine - Exigences de Küchenarbeitsplatten - Sicherheitstechnische
sécurité et méthodes d¿essai Anforderungen und Prüfverfahren
This European Standard was approved by CEN on 21 November 2015 and includes Amendment 1 approved by CEN on 13 March
2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14749:2016+A1:2022 E
worldwide for CEN national Members.
EN 14749:2016+A1 :2022 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Test procedure and tolerances . 9
4.1 General . 9
4.2 Sequence of testing . 9
4.3 Tolerances . 9
5 Safety requirements . 9
5.1 Principles of safety requirements . 9
5.1.1 General . 9
5.1.2 Determination of centre of gravity . 10
5.1.3 Determination of total mass . 10
5.2 General safety requirements . 10
5.2.1 General . 10
5.2.2 Units moving vertically . 11
5.2.3 Lids . 11
5.2.4 Vertically moving roll fronts and vertically moving sliding doors . 11
5.2.5 Extension elements . 11
5.3 Structural safety requirements . 11
5.3.1 General . 11
5.3.2 Shelves . 11
5.3.3 Shelf supports . 12
5.3.4 Storage area/-volume for heavy appliances . 12
5.3.5 Pivoted doors . 12
5.3.6 Sliding doors and horizontal roll fronts . 12
5.3.7 Extension elements . 12
5.3.8 Bottom hinged flaps . 14
5.3.9 Top hinged flaps . 14
5.3.10 Kitchen-worktops and other top surfaces . 14
5.3.11 Wall hanging units and top hanging units . 15
5.4 Stability . 16
5.4.1 General . 16
5.4.2 Kitchen floor units with kitchen-worktops . 17
5.4.3 Additional stability requirements for TV-furniture . 17
5.5 Floor standing units intended to be attached to the building . 20
5.6 Vertical glass components . 20
6 Product information . 21
7 Test report . 21
Annex A (normative) Additional test methods . 22
A.1 Vertical downwards static load of top hinged flaps . 22
A.2 Test methods for the determination of the stability of TV-furniture . 22
A.2.1 Test Equipment . 22
EN 14749:2016+A1 :2022 (E)
A.2.2 Stability test methods for TV-furniture . 23
A.3 Sidewards detachment test . 25
Annex B (informative) Guide to testing of units and components . 27
Annex C (informative) Example of loading of wall hanging units and top hanging units (see
5.3.11.3 overload). 32
Annex D (informative) Method for calculation of vertical and horizontal acting forces . 33
Bibliography . 37
EN 14749:2016+A1 :2022 (E)
European foreword
This document (EN 14749:2016+A1:2022) has been prepared by Technical Committee CEN/TC 207
“Furniture”, the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2022, and conflicting national standards
shall be withdrawn at the latest by November 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes !EN 14749:2016".
This document includes Amendment 1 approved by CEN on 13 March 2022.
The start and finish of text introduced or altered by amendment is indicated in the text by tags !".
Compared to EN 14749:2005 the following modifications have been made:
a) structure revised;
b) the most test methods removed and replaced by a reference to EN 16122:2012, Domestic and non-
domestic storage furniture — Test methods for the determination of strength, durability and stability;
c) Clause 3 “Terms and definitions” extended;
d) tests for stability of TV-furniture added;
e) Annex B (informative) “Guide to testing of units and components” amended;
f) Annex D (informative) “Relation between safety requirements, total mass and position of centre of
gravity of loaded units or loaded components” deleted;
g) new Annex D (informative) containing a method for calculation of vertical and horizontal acting
forces added.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
EN 14749:2016+A1 :2022 (E)
Introduction
With this revision the included test methods have been as far as possible taken out of the standard and
referenced to:
— EN 16122:2012, Domestic and non-domestic storage furniture — Test methods for the determination
of strength, durability and stability.
This standard was prepared in order to provide assurance that domestic storage furniture and kitchen-
worktops comply with the given requirements and are safe.
The intention of this European Standard is the prevention of serious injury through normal use, as well
as foreseeable misuse. It cannot ensure that structural failure will not eventually occur as a result of
habitual misuse.
Co-ordinating sizes for kitchen furniture (including kitchen-worktops) kitchen appliances, sinks and
decorative panels are covered by EN 1116, Kitchen furniture — Co-ordinating sizes for kitchen furniture
and kitchen appliances.
EN 14749:2016+A1 :2022 (E)
1 Scope
!This document specifies safety requirements and test methods for all types of kitchen and bathroom
storage units and domestic storage furniture, including TV-furniture, and their components."
It does not apply to non-domestic storage, office storage, industrial storage, catering equipment, retail
storage and industrial storage lockers.
!It does not apply to furnitu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.