EN 12150-2:2004

Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard

This document covers the evaluation of conformity and the factory production control of flat thermally toughened soda lime silicate safety glass for use in buildings.
Note: For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

Glas im Bauwesen - Thermisch vorgespanntes Kalknatron-Einscheibensicherheitsglas - Teil 2: Konformitätsbewertung/Produktnorm

Diese Europäische Norm umfasst die Konformitätsbewertung und die werkseigene Produktionskontrolle von flachem, thermisch vorgespanntem Kalknatron-Einscheibensicherheitsglas zur Anwendung im Bauwesen.
ANMERKUNG   Für Glaserzeugnisse mit elektrischer Verkabelung oder Anschlüssen, wie z. B. Alarm- oder Heizungs-anwendungen, können andere Richtlinien, z.B. die Niedrigspannungsrichtlinie, gelten.

Verre dans la construction - Verre de silicate sodo-calcique de sécurité trempé thermiquement - Partie 2 : Evaluation de la conformité/Norme de produit

Le présent document couvre l'évaluation de la conformité et le contrôle de la production en usine du verre de silicate sodo-calcique de sécurité plan trempé thermiquement plan utilisé dans la construction.
NOTE   Pour les produits verriers équipés d'un câblage ou de branchements électriques pour les besoins d'alarme ou de chauffage par exemple, d'autres directives comme par exemple la Directive sur les Courants Faibles peuvent s'appliquer.

Steklo v gradbeništvu - Toplotno kaljeno natrij-kalcijevo silikatno varnostno steklo - 2. del: Ovrednotenje skladnosti/standard za izdelek

General Information

• Status: Published
• Publication Date: 05-Oct-2004
• Withdrawal Date: 30-Jul-2006
• ICS: 81.040.20 - Glass in building
• Technical Committee: CEN/TC 129 - Glass in building
• Drafting Committee: CEN/TC 129/WG 2 - Toughened, heat strengthened and enamelled glass
• Current Stage: 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
• Completion Date: 03-Dec-2017
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/135 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on flat glass, profiled glass and glass block products
• Ref Project: SIST EN 12150-2:2005 - Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard

Relations

• Revised: FprEN 12150-2 - Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Product standard
• Effective Date: 26-Jul-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standardSteklo v gradbeništvu - Toplotno kaljeno natrij-kalcijevo silikatno varnostno steklo - 2. del: Ovrednotenje skladnosti/standard za izdelekVerre dans la construction - Verre de silicate sodo-calcique de sécurité trempé thermiquement - Partie 2 : Evaluation de la conformité/Norme de produitGlas im Bauwesen - Thermisch vorgespanntes Kalknatron-Einscheibensicherheitsglas - Teil 2: Konformitätsbewertung/Produktnorm81.040.20Steklo v gradbeništvuGlass in buildingICS:SIST EN 12150-2:2005enTa slovenski standard je istoveten z:EN 12150-2:200401-marec-2005SIST EN 12150-2:2005SLOVENSKI
STANDARD







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12150-2
October 2004 ICS 81.040.20
English version
Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
Verre dans la construction - Verre de silicate sodo-calcique de sécurité trempé thermiquement - Partie 2: Evaluation de la conformité
Glas im Bauwesen - Thermisch vorgespanntes Kalknatron-Einscheibensicherheitsglas - Teil 2: Konformitätsbewertung/Produktnorm This European Standard was approved by CEN on 27 May 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12150-2:2004: E



EN 12150-2:2004 (E) 2 Contents Page Foreword.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.6 4 Requirements.6 4.1 Product description.6 4.2 Conformity with the definition of thermally toughened soda lime silicate safety glass.7 4.3 Determination of the characteristic’s performances.7 4.3.1 Characteristics of thermally toughened soda lime silicate safety glass.7 4.3.2 Determination of characteristics of thermally toughened soda lime silicate safety glass products.8 4.4 Durability.10 4.5 Dangerous substances.11 5 Evaluation of conformity.11 5.1 General.11 5.2 Initial type testing of the product (see 5.1, 2).
...