EN 13024-2:2004

Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard

This document covers the evaluation of conformity and the factory production control of flat thermally toughened borosilicate safety glass for use in buildings.
Note: For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

Glas im Bauwesen - Thermisch vorgespanntes Borosilicat-Einscheibensicherheitsglas - Teil 2: Konformitätsbewertung/Produktnorm

La présente Norme européenne couvre l'évaluation de la conformité et le contrôle de la production en usine du verre borosilicaté de sécurité trempé thermiquement plan utilisé dans la construction.
NOTE   Pour les produits verriers équipés d'un câblage ou de branchements électriques pour les besoins d'alarme ou de chauffage par exemple, d'autres directives comme par exemple la Directive sur les Courants Faibles peuvent s'appliquer.

Verre dans la construction - Verre borosilicaté de sécurité trempé thermiquement - Partie 2: Evaluation de la conformité

Le présent document couvre l'évaluation de la conformité et le contrôle de la production en usine du verre borosilicaté de sécurité trempé thermiquement plan utilisé dans la construction.
NOTE   Pour les produits verriers équipés d'un câblage ou de branchements électriques pour les besoins d'alarme ou de chauffage par exemple, d'autres directives comme par exemple la Directive sur les Courants Faibles peuvent s'appliquer.

Steklo v stavbah – Toplotno kaljeno borosilikatno varnostno steklo – 2. del: Ovrednotenje skladnosti/standard za izdelek

General Information

• Status: Published
• Publication Date: 12-Oct-2004
• Withdrawal Date: 30-Jul-2006
• ICS: 81.040.20 - Glass in building
• Technical Committee: CEN/TC 129 - Glass in building
• Drafting Committee: CEN/TC 129/WG 2 - Toughened, heat strengthened and enamelled glass
• Current Stage: 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
• Completion Date: 03-Dec-2017
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/135 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on flat glass, profiled glass and glass block products
• Ref Project: SIST EN 13024-2:2005 - Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standard

Relations

• Revised: FprEN 13024-2 - Glass in building - Thermally toughened borosilicate safety glass - Part 2: Product standard
• Effective Date: 13-Nov-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/Product standardSteklo v stavbah – Toplotno kaljeno borosilikatno varnostno steklo – 2. del: Ovrednotenje skladnosti/standard za izdelekVerre dans la construction - Verre borosilicaté de sécurité trempé thermiquement - Partie 2: Evaluation de la conformitéGlas im Bauwesen - Thermisch vorgespanntes Borosilicat-Einscheibensicherheitsglas - Teil 2: Konformitätsbewertung/ProduktnormTa slovenski standard je istoveten z:EN 13024-2:2004SIST EN 13024-2:2005en81.040.20ICS:SLOVENSKI
STANDARDSIST EN 13024-2:200501-marec-2005







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13024-2October 2004ICS 81.040.20English versionGlass in building - Thermally toughened borosilicate safety glass- Part 2: Evaluation of conformity/Product standardVerre dans la construction - Verre borosilicaté de sécuritétrempé thermiquement - Partie 2: Evaluation de laconformitéGlas im Bauwesen - Thermisch vorgespanntes Borosilicat-Einscheibensicherheitsglas - Teil 2:Konformitätsbewertung/ProduktnormThis European Standard was approved by CEN on 27 May 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13024-2:2004: E



EN 13024-2:2004 (E) 2 Contents Page Foreword.4 1 Scope.5 2 Normative references.5 3 Definitions.6 4 Requirements.6 4.1 Product description.6 4.2 Conformity with the definition of thermally toughened borosilicate safety glass.7 4.3 Determination of the characteristic’s performances.7 4.3.1 Characteristics of thermally toughened borosilicate safety glass.7 4.3.2 Determination of characteristics of thermally toughened borosilicate safety glass products.8 4.4 Durability.10 4.5 Dangerous substances.11 5 Evaluation of conformity.11 5.1 General.11 5.2 Initial type testing of the product (see 5.1, 2).11 5.2.1 General.11 5.2.2 Initial ty
...