IEC/SC 61H - IEC_SC_61H

IEC 60335-2-71:2018 deals with the safety of all kinds of electrical heating appliances used for livestock rearing and breeding, such as: heat-radiating appliances, electrical sitting-hens, incubators, chicken breeding units and heating plates for animals, the rated voltage of the appliances being not more than 250 V for single-phase appliances and 480 V for other appliances. This standard applies to heating appliances used for livestock rearing and breeding that include an electrical motor. This standard does not apply to: - appliances designed exclusively for industrial purposes; - appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas); - heating units embedded in the floor; - flexible sheet heating elements for room heating (IEC 60335-2-96); - room heaters (IEC 60335-2-30). This third edition cancels and replaces the second edition published in 2002, its Amendment 1 (2007) and its Amendment 2 (2012). This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - two paragraphs are deleted (Introduction); - normative references updated (Clause 2); - colour required for symbols (7.6); - some notes converted to normative text (19.2, 21.101, 22.104).

Deals with the safety of electric animal-stunning equipment, These are for inductrial or commercial use, on farms or in areas where they may be a source of danger to the public. The standard covers manual, semi-automatic and automatic equipment. For electric fence energizers, see EN 60335-2-76. For electric fishing machines, see EN 60335-2-86.

NEXT ACTION: PUBLICATION EXPECTED BY 2019-06-30
2019-03-20 CV: project proceeded to BT (finalization) - BT deadline: 2019-04-16
2019-01-16 CV: LVD assessment  uploaded on HAS tool on 2018-12-29 (deadline: 2019-02-04). If positively assessed, project can proceed to BT (1 month consultation) for the approval of the new Annex ZZ
2018-12-07 SW: Waiting for annex ZZ to be added to the publication by BT decision after positive assessment.
2017-05-03: D156/C084 - Ratified standards not being made available.
Project on hold due to missing TC approval

TC 61 advise on 2016-02-01: Common modifications needed but experts on these products not yet detected and not declared their availability to prepare a suitable proposal

2015-03-11: PR=24832 covering CMs to EN 60335-2-76:2005/FprA2:2013 merged in A2:2015 * FprAE (23101)  also merged with 23990

To be implemented in all countries with exception of CH * See D129/130 (new implementation dates) and D129/131 (not to be published before 2008-01-01)

Amandma A1:2007 je dodatek k standardu SIST EN 60335-2-87:2003
Deals with the safety of electrcal animal-stunning equipment the rated voltage of which is not more than 250 V for single-phases appliances and 480 V for other appliances.

61H/240/RVC established on 2006-11-10: To be published without FDIS stage

Was initially linked to the LVD (2014/35/EU), but no expertise available to draft the Common Modifications - not to be offered anymore
61H/239/RVC established on 2006-11-10: To be published without FDIS stage

Incorporates EN 60335-2-76:2005/prAA (pr=16650)

Applicable to the safety of electric fence energizers, the rated voltage of which is not more than 250 V.

Deals with the safety of electric fishing machines, in which water may be electrified for catching fish or providing barriers to animals living in water. Examples are mains-operated and battery-operated electric fishing machines. The rated voltage of portable machines is less than 250 V, and less than 1000 V for fixed machines permanently connected to fixed wiring. For electric fence energizers, see EN 60335-2-76. For electric animal stunning equipment, see EN 60335-2-87.

Deals with the safety of all kinds of electrical heating appliances for rearing and breeding livestock. Examples are heat-radiating appliances, electrical sitting-hens, incubators, chicken breeding units and heating plates for animals. For room heaters, see EN 60335-2-30. For flexible-sheet heating elements for room heating, see EN 60335-2-96.

Deals with milking machines for milking farm animals, for use in stalls or in the open. Examples are bucket and direct-to-can milking machines, milking pipeline machines, recorder milking machines. The rated voltage is less than 250 V for single-phase operation and 480 V for other operations.

Deals with the safety of electric animal-stunning equipment, These are for inductrial or commercial use, on farms or in areas where they may be a source of danger to the public. The standard covers manual, semi-automatic and automatic equipment. For electric fence energizers, see EN 60335-2-76. For electric fishing machines, see EN 60335-2-86.

Work incorporated into PR=16649

This part of IEC 60335 deals with the safety of electric fence energizers, the rated voltage of which is not more than 250 V and by means of which fence wires in agricultural, domestic or feral animal control fences and security fences may be electrified or monitored. NOTE 101 Examples of electric fence energizers coming within the scope of this standard are: - mains-operated energizers; - battery-operated electric fence energizers suitable for connection to the mains, as shown in Figure 101 and Figure 102; - electric fence energizers operated by non-rechargeable batteries either incorporated or separate. This standard does not in general take into account - the use of appliances by young children or infirm persons without supervision; - the playing with appliances by young children. NOTE 102 Attention is drawn to the fact that - for appliances intended to be used on board ships or aircraft, additional requirements can be necessary; - in many countries, additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour, the national water supply authorities and similar authorities. NOTE 103 This standard does not apply to - electromagnetically coupled animal trainer collars; - appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas); - separate battery chargers (IEC 60335-2-29); - electric fishing machines (IEC 60335-2-86); - electric animal-stunning equipment (IEC 60335-2-87); - appliances for medical purposes (IEC 60601)

Superseded by EN 60335-2-76:2005

Deals with the safety of electric fishing machines, which electrify water for catching fish or to provide barriers for animals living in water. Examples include machines operated from the mains, from portable or stationary generators, and battery-operated. The rated voltage is less than 250 V for portable machines and less than 1000 V for permanent connection to fixed wiring.

Deals with the safety of electric fence energizers for agricultural, feral animal control and security fences. This includes mains-operated and battery-operated energizers.

EN following parallel vote * Superseded by EN 60335-2-71:2003

Deals with the safety of electric animal-stunning equipment. Applies to industrial or commercial use, for use on farms or in areas where they may be a source of danger to the public. The standard covers manual, semi-automatic and automatic equipment. For electric fishing machines see EN 60335-2-86. For electric fence energizers see EN 60335-2-76.

Superseded by EN 60335-2-71:2003

Certification period up to 2004-01-01 * Superseded by EN 60335-2-76:1999

Deals with the safety of milking machines to be used in stalls and in the open, which are designed for milking farm animals such as cows. The rated voltage of the milking machines is not more than 250 V for single-phase operation and 480 V for other operations.

Deals with the safety of all kinds of electrical heating appliances for animals used for livestock keeping and breeding such as: heat radiating appliances, electrical sitting-hens, incubators, chicken breeding units and heating plates for animals. The rated voltage of these appliances is not more than 250 V for single-phase operation and 480 V for other operations.

EN following parallel vote * Superseded by EN 60335-2-76:1999

EN following parallel vote * Superseded by EN 60335-2-76:1999

EN following parallel vote * Superseded by EN 60335-2-76:1999

Corrigendum to EN issued April 1993 * Supersedes HD 92 S1 * Superseded by EN 60335-2-76:1999

Corrigendum to EN issued April 1993 * Superseded by EN 60335-2-76:1999

Corrigendum to EN issued April 1993 * Superseded by EN 60335-2-76:1999