Household and similar electrical appliances - Safety - Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals

IEC 60335-2-71:2018 deals with the safety of all kinds of electrical heating appliances used for livestock rearing and breeding, such as: heat-radiating appliances, electrical sitting-hens, incubators, chicken breeding units and heating plates for animals, the rated voltage of the appliances being not more than 250 V for single-phase appliances and 480 V for other appliances. This standard applies to heating appliances used for livestock rearing and breeding that include an electrical motor. This standard does not apply to: - appliances designed exclusively for industrial purposes; - appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas); - heating units embedded in the floor; - flexible sheet heating elements for room heating (IEC 60335-2-96); - room heaters (IEC 60335-2-30). This third edition cancels and replaces the second edition published in 2002, its Amendment 1 (2007) and its Amendment 2 (2012). This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - two paragraphs are deleted (Introduction); - normative references updated (Clause 2); - colour required for symbols (7.6); - some notes converted to normative text (19.2, 21.101, 22.104).

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-71: Besondere Anforderungen für Elektrowärmegeräte für Tieraufzucht und Tierhaltung

Appareils électrodomestiques et analogues - Sécurité - Partie 2-71: Règles particulières pour les appareils de chauffage électrique destinés à la reproduction et à l'élevage des animaux

L'IEC 60335-2-71:2018 traite de la sécurité de tous types d'appareils de chauffage électrique destinés à la reproduction et à l'élevage des animaux, tels que: appareils de chauffage radiant, couveuses électriques, incubateurs, unités d'élevage de poulets et plaques chauffantes pour animaux dont la tension assignée des appareils est inférieure ou égale à 250 V pour les appareils monophasés et 480 V pour les autres appareils. La présente norme s'applique aux appareils de chauffage destinés à la reproduction et à l'élevage des animaux qui comportent un moteur électrique. La présente norme ne s'applique pas: - aux appareils prévus exclusivement pour des usages industriels; - aux appareils destinés à être utilisés dans des locaux présentant des conditions particulières, telles que la présence d'une atmosphère corrosive ou explosive (poussière, vapeur ou gaz); - aux appareils de chauffage encastrés dans le sol; - aux films souples chauffants pour le chauffage des locaux (IEC 60335-2-96); - aux appareils de chauffage des locaux (IEC 60335-2-30). Cette troisième édition annule et remplace la deuxième édition parue en 2002, son Amendement 1 (2007) et son Amendement 2 (2012). Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - deux alinéas ont été supprimés (Introduction); - les références normatives ont été mises à jour (Article 2); - les couleurs sont désormais exigées pour les symboles (7.6); - certaines notes ont été transformées en texte normatif (19.2, 21.101, 22.104).

Gospodinjski in podobni električni aparati - Varnost - 2-71. del: Posebne zahteve za električne grelne aparate za vzrejo in rejo živali

General Information

Status
Published
Publication Date
20-Feb-2020
Withdrawal Date
20-Feb-2023
Current Stage
6060 - Document made available - Publishing
Start Date
21-Feb-2020
Completion Date
21-Feb-2020

Relations

Buy Standard

Standard
EN IEC 60335-2-71:2020 - BARVE
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60335-2-71:2020
01-april-2020
Nadomešča:
SIST EN 60335-2-71:2003
SIST EN 60335-2-71:2003/A1:2007

Gospodinjski in podobni električni aparati - Varnost - 2-71. del: Posebne zahteve

za električne grelne aparate za vzrejo in rejo živali

Household and similar electrical appliances - Safety - Part 2-71: Particular requirements

for electrical heating appliances for breeding and rearing animals

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-71:

Besondere Anforderungen für Elektrowärmegeräte für Tieraufzucht und Tierhaltung

Appareils électrodomestiques et analogues - Sécurité - Partie 2-71: Règles particulières

pour les appareils de chauffage électrique destinés à la reproduction et à l'élevage des

animaux
Ta slovenski standard je istoveten z: EN IEC 60335-2-71:2020
ICS:
65.020.30 Živinoreja Animal husbandry and
breeding
97.100.10 Električni grelniki Electric heaters
SIST EN IEC 60335-2-71:2020 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60335-2-71:2020
---------------------- Page: 2 ----------------------
SIST EN IEC 60335-2-71:2020
EUROPEAN STANDARD EN IEC 60335-2-71
NORME EUROPÉENNE
EUROPÄISCHE NORM
Fébruary 2020
ICS 65.020.30; 97.100.10 Supersedes EN 60335-2-71:2003 and all of its
amendments and corrigenda (if any)
English Version
Household and similar electrical appliances - Safety - Part 2-71:
Particular requirements for electrical heating appliances for
breeding and rearing animals
(IEC 60335-2-71:2018)

Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und

Partie 2-71: Règles particulières pour les appareils de ähnliche Zwecke - Teil 2-71: Besondere Anforderungen für

chauffage électrique destinés à la reproduction et à Elektrowärmegeräte für Tieraufzucht und Tierhaltung

l'élevage des animaux (IEC 60335-2-71:2018)
(IEC 60335-2-71:2018)

This European Standard was approved by CENELEC on 2018-02-27. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN IEC 60335-2-71:2020 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60335-2-71:2020
EN IEC 60335-2-71:2020 (E)
European foreword

The text of document 61H/348/CDV, future edition 3 of IEC 60335-2-71, prepared by SC 61H "Safety

of electrically-operated farm appliances" of IEC/TC 61 "Safety of household and similar electrical

appliances" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as

EN IEC 60335-2-71:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2020-08-21
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2023-02-21
the document have to be withdrawn

This document supersedes EN 60335-2-71:2003 and all of its amendments and corrigenda (if any).

This standard is not linked to European legislation.
This standard shall be read in conjunction with IEC 60335-1:2010+A1:2013+A2:2016

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice

The text of the International Standard IEC 60335-2-71:2018 was approved by CENELEC as a

European Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards

indicated:
IEC 60335-2-30 NOTE Harmonized as EN 60335-2-30
IEC 60335-2-96 NOTE Harmonized as EN 60335-2-96
---------------------- Page: 4 ----------------------
SIST EN IEC 60335-2-71:2020
EN IEC 60335-2-71:2020 (E)
Annex ZC
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments)

applies.

NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:

www.cenelec.eu.
The Annex ZC of Part 1 is applicable, except as follows:
Publication Year Title EN/HD Year
Addition
IEC 60068-2-11 - Basic environmental testing procedures - EN 60068-2-11 -
Part 2-11: Tests - Test Ka: Salt mist
IEC 61184 - EN 61184 -
ISO 3864-1 - Graphical symbols - Safety colours and - -
safety signs - Part 1: Design principles for
safety signs and safety markings
ISO 7010 2011 Graphical symbols - Safety colours and EN ISO 7010 2012
safety signs - Registered safety signs
---------------------- Page: 5 ----------------------
SIST EN IEC 60335-2-71:2020
---------------------- Page: 6 ----------------------
SIST EN IEC 60335-2-71:2020
IEC 60335-2-71
Edition 3.0 2018-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Household and similar electrical appliances – Safety –

Part 2-71: Particular requirements for electrical heating appliances for breeding

and rearing animals
Appareils électrodomestiques et analogues – Sécurité –
Partie 2-71: Exigences particulières pour les appareils de chauffage électrique
destinés à la reproduction et à l'élevage des animaux
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 65.020.30; 97.100.10 ISBN 978-2-8322-5274-1

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN IEC 60335-2-71:2020
– 2 – IEC 60335-2-71:2018 © IEC 2018
CONTENTS

FOREWORD ........................................................................................................................... 3

INTRODUCTION ..................................................................................................................... 6

1 Scope .............................................................................................................................. 7

2 Normative references ...................................................................................................... 7

3 Terms and definitions ...................................................................................................... 7

4 General requirement ........................................................................................................ 8

5 General conditions for the tests ....................................................................................... 8

6 Classification ................................................................................................................... 8

7 Marking and instructions .................................................................................................. 9

8 Protection against access to live parts ........................................................................... 11

9 Starting of motor-operated appliances ........................................................................... 11

10 Power input and current ................................................................................................. 11

11 Heating .......................................................................................................................... 11

12 Void ............................................................................................................................... 12

13 Leakage current and electric strength at operating temperature ..................................... 12

14 Transient overvoltages .................................................................................................. 12

15 Moisture resistance ....................................................................................................... 12

16 Leakage current and electric strength ............................................................................ 12

17 Overload protection of transformers and associated circuits .......................................... 13

18 Endurance ..................................................................................................................... 13

19 Abnormal operation ....................................................................................................... 13

20 Stability and mechanical hazards ................................................................................... 13

21 Mechanical strength ...................................................................................................... 14

22 Construction .................................................................................................................. 14

23 Internal wiring ................................................................................................................ 16

24 Components .................................................................................................................. 16

25 Supply connection and external flexible cords ............................................................... 16

26 Terminals for external conductors .................................................................................. 16

27 Provision for earthing .................................................................................................... 16

28 Screws and connections ................................................................................................ 17

29 Clearances, creepage distances and solid insulation ..................................................... 17

30 Resistance to heat and fire ............................................................................................ 17

31 Resistance to rusting ..................................................................................................... 17

32 Radiation, toxicity and similar hazards ........................................................................... 17

Annexes ............................................................................................................................... 18

Bibliography .......................................................................................................................... 19

Table 101 – Temperature rises of other parts ........................................................................ 12

Table 102 – Temperature rises of other parts ........................................................................ 13

---------------------- Page: 8 ----------------------
SIST EN IEC 60335-2-71:2020
IEC 60335-2-71:2018 © IEC 2018 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-71: Particular requirements for electrical heating appliances
for breeding and rearing animals
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 60335-2-71 has been prepared by subcommittee 61H: Safety of

electrically-operated farm appliances, of IEC technical committee 61: Safety of household and

similar electrical appliances.

This third edition cancels and replaces the second edition published in 2002, its Amendment 1

(2007) and its Amendment 2 (2012). This edition constitutes a technical revision.

---------------------- Page: 9 ----------------------
SIST EN IEC 60335-2-71:2020
– 4 – IEC 60335-2-71:2018 © IEC 2018

This edition includes the following significant technical changes with respect to the previous

edition:
– two paragraphs are deleted (Introduction);
– normative references updated (Clause 2);
– colour required for symbols (7.6);
– some notes converted to normative text (19.2, 21.101, 22.104).
The text of this International Standard is based on the following documents:
FDIS Report on voting
61H/348/CDV 61H/357/RVC

Full information on the voting for the approval of this International Standard can be found in

the report on voting indicated in the above table.

This document has been drafted in accordance with the ISO/IEC Directives, Part 2.

A list of all parts of the IEC 60335 series, under the general title: Household and similar

electrical appliances – Safety, can be found on the IEC website.

This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its

amendments. It was established on the basis of the fifth edition (2010) of that standard.

NOTE 1 When “Part 1” is mentioned in this standard, it refers to IEC 60335-1.

This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to

convert that publication into the IEC standard: Safety requirements for electrical heating

appliances for breeding and rearing animals.

When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies

as far as is reasonable. When this standard states “addition”, “modification” or “replacement”,

the relevant text in Part 1 is to be adapted accordingly.
NOTE 2 The following numbering system is used:

– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;

– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including

those in a replaced clause or subclause;
– additional Annexes are lettered AA, BB, etc.
NOTE 3 The following print types are used:
– requirements: in roman type
– test specifications: in italic type
– notes: in small roman type.

Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and

associated noun are also in bold.

NOTE 4 The attention of National Committees is drawn to the fact that equipment manufacturers and testing

organizations may need a transitional period following publication of a new, amended or revised IEC publication in

which to make products in accordance with the new requirements and to equip themselves for conducting new or

revised tests.

It is the recommendation of the committee that the content of this publication be adopted for implementation

nationally not earlier than 12 months or later than 36 months from the date of publication.

---------------------- Page: 10 ----------------------
SIST EN IEC 60335-2-71:2020
IEC 60335-2-71:2018 © IEC 2018 – 5 –

The committee has decided that the contents of this document will remain unchanged until the

stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to

the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates

that it contains colours which are considered to be useful for the correct

understanding of its contents. Users should therefore print this document using a

colour printer.
---------------------- Page: 11 ----------------------
SIST EN IEC 60335-2-71:2020
– 6 – IEC 60335-2-71:2018 © IEC 2018
INTRODUCTION

It has been assumed in the drafting of this International Standard that the execution of its

provisions is entrusted to appropriately qualified and experienced persons.

This standard recognizes the internationally accepted level of protection against hazards such

as electrical, mechanical, thermal, fire and radiation of appliances when operated as in

normal use taking into account the manufacturer's instructions. It also covers abnormal

situations that can be expected in practice and takes into account the way in which

electromagnetic phenomena can affect the safe operation of appliances.

This standard takes into account the requirements of IEC 60364 as far as possible so that

there is compatibility with the wiring rules when the appliance is connected to the supply

mains. However, national wiring rules may differ.

If an appliance within the scope of this standard also incorporates functions that are covered

by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as

far as is reasonable. If applicable, the influence of one function on the other is taken into

account.

When a part 2 standard does not include additional requirements to cover hazards dealt with

in Part 1, Part 1 applies.

NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it is

not necessary to specify particular requirements for the appliance in question over and above the general

requirements.

This standard is a product family standard dealing with the safety of appliances and takes

precedence over horizontal and generic standards covering the same subject.
NOTE 2 Horizontal and generi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.