TP198 - Pravilnik o cestnem pregledu tehnične brezhibnosti gospodarskih vozil

This document specifies basic guidelines for the implementation and maintenance of country codes.
This code is intended for use in any application requiring the expression of current country names in
coded form.

This document specifies the minimum requirements and test methods for lashing points for cargo securing on commercial vehicles and intermodal loading units for cargo transport.
This document does not apply to:
-   Vehicles and intermodal loading units manufactured before publication of this standard;
-   Vehicles and intermodal loading units designed and constructed exclusively for the transport of bulk materials;
-   Vehicles and intermodal loading units designed and constructed exclusively for the transport of specific cargo with particular securing requirements;
-   Vehicles (delivery vans) in conformance to ISO 27956;
-   ISO series 1 freight containers.

This document specifies minimum requirements for the strength and attachment of tarpaulins used on swap bodies and utility vehicles for road and road/rail combined (intermodal transport) traffic.

This document specifies minimum requirements for the strength and attachment of tarpaulins used as curtainsiders on intermodal loading units and commercial vehicles.
NOTE   The described tarpaulins according to this standard only work for load securing with a body according to EN12642, Code XL or EN 283.

This European Standard applies to body structures on commercial vehicles and on trailers.
This European Standard sets out basic minimum requirements for standard vehicle bodies (side walls, front and rear walls) and for reinforced vehicle bodies and specifies appropriate tests.
This standard applies to all commercial vehicles which are related by design and body type to the body structures described below.
Forces applied according to the test requirements described below can be invoked for load securing purposes.
The floor of the vehicle is a part of the sub frame. As long as the floor strength is not defined, the manufacturer should give the necessary information. It is recommended to specify the loading capacity of the floor, the test and marking should be carried out analogous to EN 283.
This European Standard does not apply to vans according to ISO 27956.

ISO 1161:2016 establishes the basic dimensions and the functional and strength requirements of corner and intermediate fittings for series 1 freight containers, i.e. containers which conform to ISO 668 and ISO 1496 (all parts) with the exception of air mode containers (see ISO 8323).

This European Standard is applicable to the design of securing methods (blocking, lashing, and combinations) for securing of loads for surface transport by road vehicles or parts of them (lorries, trailers, containers and swap bodies), including their transport on vessels or by rail and/or combinations thereof. Hump shunting with acceleration over 1 g during railway transport is excluded, as it is not foreseen in combined transport. (Web lashings see EN 12195-2, lashing chains see EN 12195-3, lashing steel wire ropes see EN 12195-4). This European Standard does not apply for vehicles with a total weight equal to or lower than 3 500 kg.
NOTE Lighter vehicles can have driving characteristics, which give higher values of acceleration on the road. For dimensioning of load securing a distinction is made between stable loads and loads liable to tilting. Furthermore, the acceleration coefficients for surface transport are specified. For over top lashing the force loss in the tension force of the lashing at the outer edges between load and lashing is taken into account. The securing forces to be chosen for calculation in this EN 12195-1 are static forces produced by blocking or tensioning of lashings and dynamic forces, which act on the lashing as a reaction of the load movements. Examples for the application of calculations are given in Annex A.

ISO 1496-1:2013 specifies the basic specifications and testing requirements for ISO series 1 freight containers of the totally enclosed general purpose types and certain specific purpose types (closed, vented, ventilated or open top) which are suitable for international exchange and for conveyance by road, rail and sea, including interchange between these forms of transport.

This European Standard is applicable to the design of securing methods (blocking, lashing, and combinations) for securing of loads for surface transport by road vehicles or parts of them (lorries, trailers, containers and swap bodies), including their transport on vessels or by rail and/or combinations thereof. Hump shunting with acceleration over 1 g during railway transport is excluded, as it is not foreseen in combined transport. (Web lashings see EN 12195-2, lashing chains see EN 12195-3, lashing steel wire ropes see EN 12195-4).
This European Standard does not apply for vehicles with a total weight equal to or lower than 3 500 kg.
NOTE Lighter vehicles can have driving characteristics, which give higher values of acceleration on the road.
For dimensioning of load securing a distinction is made between stable loads and loads liable to tilting. Furthermore, the acceleration coefficients for surface transport are specified.
For over top lashing the force loss in the tension force of the lashing at the outer edges between load and lashing is taken into account. The securing forces to be chosen for calculation in this EN 12195-1 are static forces produced by blocking or tensioning of lashings and dynamic forces, which act on the lashing as a reaction of the load movements.
Examples for the application of calculations are given in Annex A.

This Part 4 of EN 12195
- specifies safety requirements for lashing steel wire ropes and flat lashing steel wire ropes and lashing combina-tions with lashing steel wire ropes for the safe surface transport of loads on load carriers, e. g. trucks and trailers which are used on roads or located on vessels or on rail waggons and/or combinations thereof;
- stipulates procedures for testing lashing steel wire ropes and flat lashing steel wire ropes;
- deals with hazards which could occur when lashing steel wire ropes and flat lashing steel wire ropes are in use as intended and under conditions foreseen by the manufacturer (see clause 4 and Annex A).

This Part of EN 12195 specifies safety requirements for lashing chains and lashing combinations with chain for the safe surface transport of goods on load carriers, e.g. trucks and trailers which are used on roads or located on vessels or on rail waggons and/or combinations thereof. The standard includes only tensioning devices to be hand driven with a maximum handforce of 500 N. It does not give requirements for multi-purpose lover blocks other than to the type of fine calibrated chain and the additional marking  of the maximum hand-operating force.
This part of EN 12195 deals with hazards which could occur when lashing chains are in use as intended and under conditions foreseen by the manufacturer (see clause 4 and Annex A).

This Part of EN 12195 specifies safety requirements for web lashing made from man-made fibres with flat woven webbings for multiple use and of lashing combinations with woven webbings for the safe surface transport of goods on road vehicles, e.g. trucks and trailers which are used on roads or located on vessels or on rail waggons and/or combinations thereof; specifies methods for testing of web lashing for securing of loads; etc.

This European Standard lays down the basic testing requirements for swap bodies of class A, B and C, which are suitable for conveyance by road and rail vehicles, including interchange between these modes of transport. This standard does not apply to specific cargo swap bodies (e.g. tank type swap bodies).

Amends subclauses 5.8.2, 5.10.1.1, 6.4.2, 6.6.2, B.2.2, tables 2, 3, figures A.6, B.3, B.5, D.1, F.1, replaces subclause 5.10.3.

Specifies the basic specifications and testing requirements for containers of the dry bulk non-pressurized type which are suitable for international exchange and for conveyance by road, rail and sea. Annexes F and G are for information only.

ISO 1496-2:2008 gives the basic specifications and testing requirements for ISO series 1 thermal containers for international exchange and for conveyance of goods by road, rail and sea, including interchange between these forms of transport.

Cancels and replaces the third edition (1991). Specifies the basic specifications and testing requirements for ISO series 1 tank containers suitable for the carriage of gases, liquids and solid substances (dry bulk) which may be loaded or unloaded as liquids by gravity or pressure discharge, for international exchange and for conveyance by road, rail and sea, including interchange between these forms of transport. The requirements are minimum requirements.

Adds a final paragraph to subclause 5.2, replaces note 3, replaces the last paragraph of subclause 6.1, replaces the first paragraph of subclause F.3.1, and adds figure F.1.

Amends subclauses 1.1, 5.9.1.1, 6.4.2, B.2.2, F.2.2, table 2 and 3, figure D.1, replaces subclause 5.9.3, title of figures B.3 and B.5.

Specifies the basic specifications and testing requirements for containers designated 1AA, 1A, 1AX, 1BB, 1B, 1BX, 1CC, 1C and 1CX which are suitable for international exchange and for conveyance by road, rail and sea.