iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM D1356-15a

(Terminology)

Standard Terminology Relating to Sampling and Analysis of Atmospheres

Standard Terminology Relating to Sampling and Analysis of Atmospheres

General Information

Status
Historical
Publication Date
14-Oct-2015
ICS
01.040.13 - Environment. Health protection. Safety (Vocabularies)
13.040.20 - Ambient atmospheres
Technical Committee
D22 - Air Quality
Drafting Committee
D22.01 - Quality Control
Current Stage
Ref Project

Relations

Replaces
ASTM D1356-15 - Standard Terminology Relating to Sampling and Analysis of Atmospheres
Effective Date
15-Oct-2015
Referred By
ASTM D6620-19 - Standard Practice for Asbestos Detection Limit Based on Counts
Effective Date
15-Oct-2015
Referred By
ASTM D5011-17 - Standard Practices for Calibration of Ozone Monitors Using Transfer Standards
Effective Date
15-Oct-2015
Referred By
ASTM D4599-21 - Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
Effective Date
15-Oct-2015
Referred By
ASTM D3687-19 - Standard Test Method for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method
Effective Date
15-Oct-2015
Referred By
ASTM D6589-23 - Standard Guide for Statistical Evaluation of Atmospheric Dispersion Model Performance
Effective Date
15-Oct-2015
Referred By
ASTM D6329-98(2023) - Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
Effective Date
15-Oct-2015
Referred By
ASTM D6562-20 - Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace
Effective Date
15-Oct-2015
Referred By
ASTM D2010/D2010M-98(2017) - Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique
Effective Date
15-Oct-2015
Referred By
ASTM D1914-95(2022) - Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
Effective Date
15-Oct-2015
Referred By
ASTM D5110-22a - Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
Effective Date
15-Oct-2015
Referred By
ASTM D4765-13(2018) - Standard Test Method for Measurement of Fluorides in Workplace Atmospheres by Ion-Selective Electrodes
Effective Date
15-Oct-2015
Referred By
ASTM D7707-21 - Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust
Effective Date
15-Oct-2015
Referred By
ASTM D7440-08(2015)e1 - Standard Practice for Characterizing Uncertainty in Air Quality Measurements
Effective Date
15-Oct-2015
Referred By
ASTM D8358-21 - Standard Guide for Assessment and Inclusion of Wall Deposits in the Analysis of Single-Stage Samplers for Airborne Particulate Matter
Effective Date
15-Oct-2015

Buy Standard

ASTM D1356-15a - Standard Terminology Relating to Sampling and Analysis of AtmospheresASTM D1356-15a - Standard Terminology Relating to Sampling and Analysis of Atmospheres
PreviousNext
Standard
ASTM D1356-15a - Standard Terminology Relating to Sampling and Analysis of Atmospheres
English language
18 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ASTM D1356-15a - Standard Terminology Relating to Sampling and Analysis of AtmospheresREDLINE ASTM D1356-15a - Standard Terminology Relating to Sampling and Analysis of Atmospheres
PreviousNext
Standard
REDLINE ASTM D1356-15a - Standard Terminology Relating to Sampling and Analysis of Atmospheres
English language
18 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: D1356 − 15a
StandardTerminology Relating to
1
Sampling and Analysis of Atmospheres
This standard is issued under the fixed designation D1356; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope D4023Terminology Relating to Humidity Measurements
3
(Withdrawn 2002)
1.1 This terminology is a collective vocabulary relating to
D4096Test Method for Determination of Total Suspended
sampling and analysis of atmospheres. As a convenience to
ParticulateMatterintheAtmosphere(High–VolumeSam-
general interest, it contains most of the standard terms,
pler Method)
definitions, and nomenclature under the jurisdiction of Com-
D4240Test Method forAirborneAsbestos Concentration in
mittee D22. 3
Workplace Atmosphere (Withdrawn 1995)
D4298Guide for Intercomparing Permeation Tubes to Es-
1.2 Manyoftheentriesinthisterminologyarecopied(with
tablish Traceability
attribution) from the standards of origin referenced in Section
D4597Practice for Sampling Workplace Atmospheres to
2. The standards of origin are noted in bold type at the right
Collect Gases or Vapors with Solid Sorbent Diffusive
margin of the applicable definition.
Samplers
1.3 Certain terms in the common language that comprise
D5011Practices for Calibration of Ozone Monitors Using
multiple concepts are included herein with the definition
Transfer Standards
specific to standards and practices of Committee D22.
D5015Test Method for pH of Atmospheric Wet Deposition
Samples by Electrometric Determination
2. Referenced Documents
D5096Test Method for Determining the Performance of a
2 Cup Anemometer or Propeller Anemometer
2.1 ASTM Standards:
D5111Guide for Choosing Locations and Sampling Meth-
D1357Practice for Planning the Sampling of the Ambient
ods to Monitor Atmospheric Deposition at Non-Urban
Atmosphere
Locations
D3249Practice for General Ambient Air Analyzer Proce-
D5366Test Method for Determining the Dynamic Perfor-
dures
mance of a Wind Vane
D3614Guide for Laboratories Engaged in Sampling and
D5438Practice for Collection of Floor Dust for Chemical
Analysis of Atmospheres and Emissions
Analysis
D3631Test Methods for Measuring Surface Atmospheric
D5466Test Method for Determination of Volatile Organic
Pressure
Chemicals inAtmospheres (Canister Sampling Methodol-
D3670Guide for Determination of Precision and Bias of
ogy)
Methods of Committee D22
D5527Practices for Measuring Surface Wind and Tempera-
D3686Practice for Sampling Atmospheres to Collect Or-
ture by Acoustic Means
ganic Compound Vapors (Activated Charcoal Tube Ad-
D5755TestMethodforMicrovacuumSamplingandIndirect
sorption Method)
Analysis of Dust by Transmission Electron Microscopy
D3687Practice for Analysis of Organic Compound Vapors
for Asbestos Structure Number Surface Loading
Collected by the Activated Charcoal Tube Adsorption
D6061Practice for Evaluating the Performance of Respi-
Method
rable Aerosol Samplers
D6196Practice for Selection of Sorbents, Sampling, and
Thermal Desorption Analysis Procedures for Volatile Or-
1
This terminology is under the jurisdiction of ASTM Committee D22 on Air ganic Compounds in Air
QualityandisthedirectresponsibilityofSubcommitteeD22.01onQualityControl.
D6246Practice for Evaluating the Performance of Diffusive
Current edition approved Oct. 15, 2015. Published November 2015. Originally
Samplers
approved in 1955. Last previous edition approved in 2015 as D1356–15. DOI:
D6552Practice for Controlling and Characterizing Errors in
10.1520/D1356-15A.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
3
Standards volume information, refer to the standard’s Document Summary page on The last approved version of this historical standard is referenced on
the ASTM website. www.astm.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
D1356 − 15a
Weighing Collected Aerosols ISO15202-2WorkplaceAir—DeterminationofMetalsand
D6785TestMethodforDeterminationofLeadinWorkplace Metalloids in Airborne Particulate Matter by Inductively
Air Using Flame or Graphite FurnaceAtomicAbsorption CoupledPlasmaAtomicEmissionSpectrometry—Part2:
7
Spectrometry Sample Preparation
D7036Practice for Competence of Air Emission Testing ISO15202-3WorkplaceAir—DeterminationofMetalsand
Bodies Metalloids in Airborne Particulate Matter by Inductively
D7144Practice for Collection of Surface Dust by Micro- CoupledPlasmaAtomicEmissionSpectrometry—Part3:
7
vacuum Sampling for Subseque
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: D1356 − 15 D1356 − 15a
Standard Terminology Relating to
1
Sampling and Analysis of Atmospheres
This standard is issued under the fixed designation D1356; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This terminology is a collective vocabulary relating to sampling and analysis of atmospheres. As a convenience to general
interest, it contains most of the standard terms, definitions, and nomenclature under the jurisdiction of Committee D22.
1.2 Many of the entries in this terminology are copied (with attribution) from the standards of origin referenced in Section 2.
The standards of origin are noted in bold type at the right margin of the applicable definition.
1.3 Certain terms in the common language that comprise multiple concepts are included herein with the definition specific to
standards and practices of Committee D22.
2. Referenced Documents
2
2.1 ASTM Standards:
D1357 Practice for Planning the Sampling of the Ambient Atmosphere
D3249 Practice for General Ambient Air Analyzer Procedures
D3614 Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions
D3631 Test Methods for Measuring Surface Atmospheric Pressure
D3670 Guide for Determination of Precision and Bias of Methods of Committee D22
D3686 Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
D3687 Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method
3
D4023 Terminology Relating to Humidity Measurements (Withdrawn 2002)
D4096 Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler
Method)
3
D4240 Test Method for Airborne Asbestos Concentration in Workplace Atmosphere (Withdrawn 1995)
D4298 Guide for Intercomparing Permeation Tubes to Establish Traceability
D4597 Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
D5011 Practices for Calibration of Ozone Monitors Using Transfer Standards
D5015 Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
D5096 Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer
D5111 Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban Locations
D5366 Test Method for Determining the Dynamic Performance of a Wind Vane
D5438 Practice for Collection of Floor Dust for Chemical Analysis
D5466 Test Method for Determination of Volatile Organic Chemicals in Atmospheres (Canister Sampling Methodology)
D5527 Practices for Measuring Surface Wind and Temperature by Acoustic Means
D5755 Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for
Asbestos Structure Number Surface Loading
D6061 Practice for Evaluating the Performance of Respirable Aerosol Samplers
D6196 Practice for Selection of Sorbents, Sampling, and Thermal Desorption Analysis Procedures for Volatile Organic
Compounds in Air
D6246 Practice for Evaluating the Performance of Diffusive Samplers
D6552 Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols
1
This terminology is under the jurisdiction of ASTM Committee D22 on Air Quality and is the direct responsibility of Subcommittee D22.01 on Quality Control.
Current edition approved July 1, 2015Oct. 15, 2015. Published August 2015November 2015. Originally approved in 1955. Last previous edition approved in 20142015
as D1356 – 14b.D1356 – 15. DOI: 10.1520/D1356-15.10.1520/D1356-15A.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
3
The last approved version of this historical standard is referenced on www.astm.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
D1356 − 15a
D6785 Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption
Spectrometry
D7036 Practice for Competence of Air Emission Testing Bodies
D7144 Pract
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM D1356-20a(Terminology)
Standard Terminology Relating to Sampling and Analysis of Atmospheres

SCOPE
1.1 This terminology is a collective vocabulary relating to sampling and analysis of atmospheres. As a convenience to general interest, it contains most of the standard terms, definitions, and nomenclature under the jurisdiction of Committee D22.  
1.2 Many of the entries in this terminology are copied (with attribution) from the standards of origin referenced in Section 2. The standards of origin are noted in bold type at the right margin of the applicable definition.  
1.3 Certain terms in the common language that comprise multiple concepts are included herein with the definition specific to standards and practices of Committee D22.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    18 pages
    English language
    sale 15% off
  • Standard
    18 pages
    English language
    sale 15% off
ASTM
ASTM D1356-20a(Terminology)
Standard Terminology Relating to Sampling and Analysis of Atmospheres

SCOPE
1.1 This terminology is a collective vocabulary relating to sampling and analysis of atmospheres. As a convenience to general interest, it contains most of the standard terms, definitions, and nomenclature under the jurisdiction of Committee D22.  
1.2 Many of the entries in this terminology are copied (with attribution) from the standards of origin referenced in Section 2. The standards of origin are noted in bold type at the right margin of the applicable definition.  
1.3 Certain terms in the common language that comprise multiple concepts are included herein with the definition specific to standards and practices of Committee D22.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    18 pages
    English language
    sale 15% off
  • Standard
    18 pages
    English language
    sale 15% off
ASTM
ASTM B637-23(Specification)
Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

ABSTRACT
This specification covers hot- and cold-worked precipitation-hardenable nickel alloy rod, bar, forgings, and forging stock for high-temperature service. Chemical analysis shall be performed on the alloy and shall conform to the chemical composition requirement in carbon, manganese, silicon, phosphorus, sulfur, chromium, cobalt, molybdenum, columbium, tantalum, titanium, aluminum, zirconium, boron, iron, copper, and nickel. The material shall follow recommended annealing treatment, solution treatment, stabilizing treatment, and precipitation hardening treatment. Tension testing, hardness testing and stress-rupture testing shall be performed on the material and shall comply to the required tensile strength, yield strength, elongation, reduction in area, and Brinell hardness.
SCOPE
1.1 This specification2 covers hot- and cold-worked precipitation-hardenable nickel alloy rod, bar, forgings, and forging stock for moderate or high temperature service (Table 1).  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    7 pages
    English language
    sale 15% off
  • Technical specification
    7 pages
    English language
    sale 15% off
ASTM
ASTM C596-23(Test Method)
Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement

SIGNIFICANCE AND USE
4.1 This test method establishes a selected set of conditions of temperature, relative humidity and rate of evaporation of the environment to which a mortar specimen of stated composition shall be subjected for a specified period of time during which its change in length is determined and designated “drying shrinkage.”  
4.2 The drying shrinkage of mortar as determined by this test method has a linear relation to the drying shrinkage of concrete made with the same cement and exposed to the same drying conditions.4 Hence this test method may be used when it is desired to develop data on the effect of a hydraulic cement on the drying shrinkage of concrete made with that cement.
SCOPE
1.1 This test method determines the change in length on drying of mortar bars containing hydraulic cement and graded standard sand.  
1.2 The values stated in SI units are to be regarded as standard. When combined standards are referenced, the selection of measurement system is at the user’s discretion subject to the requirements of the referenced standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Warning—Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure).2  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM F3337-23(Guide)
Standard Guide for Taking Property and Behavior Measurements on Weathered Fractions of Oil

SIGNIFICANCE AND USE
5.1 A standard procedure is necessary to establish property changes for spilled oils or petroleum products at different oil weathering stages.  
5.2 This procedure employs standardized equipment, and test procedures.  
5.3 This procedure should be performed at the stages of weathering corresponding to the spill conditions of interest.
SCOPE
1.1 This guide summarizes methods to fractionate oil by evaporative weathering and then measure the properties and behavior of the weathered oil. The results of this guide can provide oil behavior data for input into oil spill models and response method selection.  
1.2 This guide covers general procedures for oil weathering and behavior and does not cover all possible procedures which may be applicable to this topic.  
1.3 The results obtained using this guide are intended to provide baseline data for the behavior of oil and petroleum products when spilled and input to oil spill models.  
1.4 The results obtained using this guide can be used directly to predict certain facets of oil spill behavior or as input to oil spill models.  
1.5 The accuracy of the guide depends very much on the representative nature of the oil sample used. Certain oils can have different properties depending on their chemical contents at the moment a sample is taken.  
1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    4 pages
    English language
    sale 15% off
  • Guide
    4 pages
    English language
    sale 15% off
ASTM
ASTM F1210-23(Guide)
Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies

SIGNIFICANCE AND USE
3.1 This guide is meant to aid response teams who may use it during spill response planning and spill events.  
3.2 This guide should be adapted to site specific circumstance.
SCOPE
1.1 This guide covers the use of oil spill dispersants to assist in the control of oil spills. The guide is written with the goal of minimizing the environmental impacts of oil spills; this goal is the basis on which the recommendations are made. Aesthetic and socioeconomic factors are not considered, although these and other factors are often important in spill response.  
1.2 Spill responders have available several means to control or clean up spilled oil. Chemical dispersants should be given equal consideration with other spill countermeasures.  
1.3 This is a general guide only. Oil, as used in this guide, includes crude oils and refined petroleum products. Differences between individual dispersants or between different oil products are not considered. The dispersibility of the oil with the chosen dispersant should be evaluated.  
1.4 The guide is organized by habitat type, for example, small ponds and lakes, rivers and streams, and land. It considers the use of dispersants primarily to protect habitats from impact (or to minimize impacts).  
1.5 This guide applies only to freshwater and other inland environments. It does not consider the direct application of dispersants to subsurface waters.  
1.6 In making dispersant use decisions, appropriate government authorities should be consulted as required by law.  
1.7 This guide does not address getting regulatory approval.  
1.8 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    3 pages
    English language
    sale 15% off
  • Guide
    3 pages
    English language
    sale 15% off
ASTM
ASTM D8139-23(Specification)
Standard Specification for Semi-Rigid, Closed-Cell Polypropylene Foam, Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction

SCOPE
1.1 This specification covers preformed expansion joint fillers made from closed-cell polypropylene foam materials having suitable compressibility, recovery from compression, nonextruding, and weather-resistant characteristics.  
1.1.1 Type I, closed-cell polypropylene foam.  
1.2 These joint fillers are intended for use in concrete pavements in full-depth joints. There are several variations in size with typical thicknesses of 1/2 in. (12.7 mm), 3/4 in. (19.05 mm), and 1 in. (25.4 mm); typical widths of 31/2 in. (88.9 mm), 4 in. (101.6 mm), 5 in. (127 mm), 6 in. (152.5 mm), 7 in. (177.8 mm), 8 in. (203.2 mm), or 48 in. (1.2 m) sheet; and typical lengths of 5 ft (1.52 m) and 10 ft (3.05 m).  
1.3 The values stated in inch-pound units are to be regarded as the standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D6390-23(Test Method)
Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures

SIGNIFICANCE AND USE
5.1 This test method can be used to determine whether the amount of draindown measured for a given asphalt mixture is within specified acceptable levels. The test provides an evaluation of the draindown potential of an asphalt mixture during mixture design and/or during field production. This test is primarily used for mixtures with high coarse aggregate content such as porous asphalt (open-graded friction course) and stone matrix asphalt (SMA).
Note 1: The quality of the results produced by this standard are dependent on the competence of the personnel performing the procedure and the capability, calibration, and maintenance of the equipment used. Agencies that meet the criteria of Specification D3666 are generally considered capable of competent and objective testing, sampling, inspection, etc. Users of this standard are cautioned that compliance with Specification D3666 alone does not completely ensure reliable results. Reliable results depend on many factors; following the suggestions of Specification D3666 or some similar acceptable guideline provides a means of evaluating and controlling some of those factors.
SCOPE
1.1 This test method covers the determination of the amount of draindown in an uncompacted asphalt mixture sample when the sample is held at elevated temperatures comparable to those encountered during the production, storage, transport, and placement of the mixture. The test is particularly applicable to mixtures such as porous asphalt (open-graded friction course) and stone matrix asphalt (SMA).  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D545-23(Test Method)
Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)

SIGNIFICANCE AND USE
3.1 The compression resistance perpendicular to the faces, the resistance to the extrusion during compression, and the ability to recover after release of the load are indicative of a joint filler's ability to continuously fill a concrete expansion joint and thereby prevent damage that might otherwise occur during thermal expansion. The asphalt content is a measure of the fiber-type joint filler's durability and life expectancy. In the case of cork-type fillers, the resistance to water absorption and resistance to boiling hydrochloric acid are relative measures of durability and life expectancy.
Note 2: The quality of the results produced by this standard are dependent on the competence of the personnel performing the procedure and the capability, calibration, and maintenance of the equipment used. Agencies that meet the criteria of Specification D3666 are generally considered capable of competent and objective testing, sampling, inspection, etc. Users of this standard are cautioned that compliance with Specification D3666 alone does not completely ensure reliable results. Reliable results depend on many factors; following the suggestions of Specification D3666 or some similar acceptable guideline provides a means of evaluating and controlling some of those factors.
SCOPE
1.1 These test methods cover the physical properties associated with preformed expansion joint fillers. The test methods include:    
Property  
Section  
Expansion in Boiling Water  
7.1  
Recovery and Compression  
7.2  
Extrusion  
7.3  
Boiling in Hydrochloric Acid  
7.4  
Asphalt Content  
7.5  
Water Absorption  
7.6  
Density  
7.7
Note 1: Specific test methods are applicable only to certain types of joint fillers, as stated herein.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
ASTM
ASTM D517-23(Specification)
Standard Specification for Asphalt Plank

ABSTRACT
This specification covers asphalt plank used for bridge decks as well as for industrial floors. Asphalt planks shall be classified according to usage: Type Ia; Type Ib; and Type II. Asphalt plank shall be formed from a mixture of asphalt, fibers, modifiers, or a combination thereof, and mineral filler in such a manner as to produce a uniformly dense mass. The following test methods shall be intended to measure those attributes necessary to measure the ability of asphalt plank to provide a reasonably long and satisfactory service: absorption; brittleness; dimensions; and hardness.
SCOPE
1.1 This specification covers asphalt plank used for bridge decks as well as for industrial floors.  
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off
  • Technical specification
    3 pages
    English language
    sale 15% off