ASTM E1749-18
(Terminology)Standard Terminology Relating to Rigid Wall Relocatable Shelters
Standard Terminology Relating to Rigid Wall Relocatable Shelters
SCOPE
1.1 This terminology covers terms and their definitions relevant to the materials and processes associated with the construction of rigid wall relocatable shelters.
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
Relations
Buy Standard
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: E1749 − 18
Standard Terminology Relating to
1
Rigid Wall Relocatable Shelters
This standard is issued under the fixed designation E1749; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
1. Scope D1356 Terminology Relating to Sampling and Analysis of
Atmospheres
1.1 This terminology covers terms and their definitions
D1566 Terminology Relating to Rubber
relevant to the materials and processes associated with the
D1781 Test Method for Climbing Drum Peel for Adhesives
construction of rigid wall relocatable shelters.
D2240 Test Method for Rubber Property—Durometer Hard-
1.2 This international standard was developed in accor-
ness
dance with internationally recognized principles on standard-
D2730 Test Method for Sag Flow of Highly Viscous Mate-
ization established in the Decision on Principles for the 3
rials (Withdrawn 1986)
Development of International Standards, Guides and Recom-
D3167 Test Method for Floating Roller Peel Resistance of
mendations issued by the World Trade Organization Technical
Adhesives
Barriers to Trade (TBT) Committee.
E492 Test Method for Laboratory Measurement of Impact
Sound Transmission Through Floor-Ceiling Assemblies
2. Referenced Documents
Using the Tapping Machine
2
2.1 ASTM Standards:
E631 Terminology of Building Constructions
B547/B547M Specification for Aluminum and Aluminum-
E864 Practice for Surface Preparation of Aluminum Alloys
Alloy Formed and Arc-Welded Round Tube
to Be Adhesively Bonded in Honeycomb Shelter Panels
C273/C273M Test Method for Shear Properties of Sandwich
E874 Practice for Adhesive Bonding of Aluminum Facings
Core Materials
to Nonmetallic Honeycomb Core for Shelter Panels
C274 Terminology of Structural Sandwich Constructions
E1925 Specification for Engineering and Design Criteria for
3
(Withdrawn 2016)
Rigid Wall Relocatable Structures
C364/C364M Test Method for Edgewise Compressive
F412 Terminology Relating to Plastic Piping Systems
Strength of Sandwich Constructions
G15 Terminology Relating to Corrosion and Corrosion Test-
3
C393/C393M Test Method for Core Shear Properties of
ing (Withdrawn 2010)
Sandwich Constructions by Beam Flexure
3
C460 Terminology forAsbestos-Cement (Withdrawn 2001)
3. Terminology
C582 Specification for Contact-Molded ReinforcedThermo-
3.1 Many of the terms defined in this terminology are
setting Plastic (RTP) Laminates for Corrosion-Resistant
delineated in Terminologies C274, C460, D123, D883, D907,
Equipment
D1079, D1356, D1566, E631, F412, and G15.
D123 Terminology Relating to Textiles
D883 Terminology Relating to Plastics
absolute sealing—a level of sealing that requires all seams,
D907 Terminology of Adhesives
slots, holes, and fasteners passing through the seal plane to
D1079 Terminology Relating to Roofing and Waterproofing
be sealed.
accelerated test—See test, accelerated.
1
This terminology is under the jurisdiction of ASTM Committee E06 on
Performance of Buildings and is the direct responsibility of Subcommittee E06.53 adhesive—a substance capable of holding materials together
on Materials and Processes for Durable Rigidwall Relocatable Structures.
by means of surface attachment. D907
Current edition approved Oct. 1, 2018. Published November 2018. Originally
approved in 1995. Last previous edition approved in 2010 as E1749–10. DOI:
cold setting adhesive—an adhesive which sets at tempera-
10.1520/E1749–18.
tures below 20 °C (68 °F). D907
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
contact pressure adhesive—a resinous adhesive which is
Standards volume information, refer to the standard’s Document Summary page on
aggressively and permanently tacky at room temperature and
the ASTM website.
3
adheres to a variety of surfaces upon contact with a minimum
The last approved version of this historical standard is referenced on
www.astm.org. of pressure required. (Syn. pressure-sensitive adhesives.)
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
E1749 − 18
core splice adhesive—a film adhesive, capable of expansion beam shear—a term describing the stresses developed in
ofatleast175 %ofitsoriginalthickness,usedprimarilytojoin planes parallel to facing p
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: E1749 − 10 E1749 − 18
Standard Terminology Relating to
1
Rigid Wall Relocatable Shelters
This standard is issued under the fixed designation E1749; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
1. Scope
1.1 This terminology covers terms and their definitions relevant to the materials and processes associated with the construction
of rigid wall relocatable shelters.
1.2 This international standard was developed in accordance with internationally recognized principles on standardization
established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued
by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents
2
2.1 ASTM Standards:
B547/B547M Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
C273C273/C273M Test Method for Shear Properties of Sandwich Core Materials
3
C274 Terminology of Structural Sandwich Constructions (Withdrawn 2016)
C364C364/C364M Test Method for Edgewise Compressive Strength of Sandwich Constructions
C393C393/C393M Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
3
C460 Terminology for Asbestos-Cement (Withdrawn 2001)
C582 Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
D123 Terminology Relating to Textiles
D883 Terminology Relating to Plastics
D907 Terminology of Adhesives
D1079 Terminology Relating to Roofing and Waterproofing
D1356 Terminology Relating to Sampling and Analysis of Atmospheres
D1566 Terminology Relating to Rubber
D1781 Test Method for Climbing Drum Peel for Adhesives
D2240 Test Method for Rubber Property—Durometer Hardness
3
D2730 Test Method for Sag Flow of Highly Viscous Materials (Withdrawn 1986)
D3167 Test Method for Floating Roller Peel Resistance of Adhesives
E492 Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the
Tapping Machine
E631 Terminology of Building Constructions
E864 Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
E874 Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
E1925 Specification for Engineering and Design Criteria for Rigid Wall Relocatable Structures
F412 Terminology Relating to Plastic Piping Systems
3
G15 Terminology Relating to Corrosion and Corrosion Testing (Withdrawn 2010)
1
This terminology is under the jurisdiction of ASTM Committee E06 on Performance of Buildings and is the direct responsibility of Subcommittee E06.53 on Materials
and Processes for Durable Rigidwall Relocatable Structures.
Current edition approved Nov. 1, 2010Oct. 1, 2018. Published December 2010November 2018. Originally approved in 1995. Last previous edition approved in 20052010
as E1749 – 05.E1749–10. DOI: 10.1520/E1749-10.10.1520/E1749–18.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’sstandard’s Document Summary page on the ASTM website.
3
The last approved version of this historical standard is referenced on www.astm.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
E1749 − 18
3. Terminology
3.1 Many of the terms defined in this terminology are delineated in Terminologies C274, C460, D123, D883, D907, D1079,
D1356, D1566, E631, F412, and G15.
absolute sealing—a level of sealing that requires all seams, slots, holes, and fasteners passing through the seal plane to be sealed.
accelerated test—See test, accelerated.
adhesive—a substance capable of holding materials together by means of surface attachment. D907
cold setting adhesive—an adhesive which sets at temperatures below 20°C (68°F).20 °C (68 °F). D907
contact pressure adhesive—a resinous adhesive which is aggressively and permanently tacky at room temperature and adheres
to a variety of surfaces upon contact with a minimum of pressure required. (Syn. pressure-sensitive
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.