ASTM F1075-97(2018)
(Specification)Standard Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self-Contained
Standard Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self-Contained
ABSTRACT
This specification covers the performance requirements and corresponding test procedures for self-contained shipboard dehumidifiers that use hermetic refrigerant motor-compressors. The components of the dehumidifier, including the motor-compressor, condensing unit, dehumidifying coil, air-circulating fan, and accessories, shall all be enclosed within a metal cabinet. Dehumidifiers shall be evaluated by design capacity test, overload test, inclination test, and corrosion resistance test, and should operate satisfactorily as specified. Requirements for design documentation, schematic drawings, and manufacturer's manual are also considered.
SCOPE
1.1 This specification covers self-contained dehumidifiers using hermetic refrigerant motor-compressors.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3 The following safety hazards caveat pertains only to the test methods portion, Section 11, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
Relations
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: F1075 −97 (Reapproved 2018) An American National Standard
Standard Specification for
Dehumidifier, Shipboard, Mechanically Refrigerated, Self-
1
Contained
This standard is issued under the fixed designation F1075; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
3
1. Scope 2.2 ASHRAE Standards:
ASHRAE 15 Safety Code for Mechanical Refrigeration
1.1 This specification covers self-contained dehumidifiers
4
2.3 Offıcial Classification Standards:
using hermetic refrigerant motor-compressors.
Uniform Freight Classification Ratings, Rules, and Regula-
1.2 The values stated in inch-pound units are to be regarded tions
5
as standard. The values given in parentheses are mathematical 2.4 UL Standards:
conversions to SI units that are provided for information only UL 474 Dehumidifiers
and are not considered standard. UL 984 Hermetic Refrigerant Motor—Compressors
6
2.5 Military Documents:
1.3 The following safety hazards caveat pertains only to the
MIL-S-901 Specification Requirements for Shock Tests,
test methods portion, Section 11, of this specification: This
High Impact (H.I.); Shipboard Machinery, Equipment,
standard does not purport to address all of the safety concerns,
and Systems
if any, associated with its use. It is the responsibility of the user
MIL-STD-167-1 Mechanical Vibrations of Shipboard
of this standard to establish appropriate safety, health, and
Equipment, (Type I—Environmental and Type II—
environmental practices and determine the applicability of
Internally Excited)
regulatory limitations prior to use.
MIL-D-19947 Specification for Dehumidifier, Space, Me-
1.4 This international standard was developed in accor-
chanically Refrigerated, Self-Contained, Naval Shipboard
dance with internationally recognized principles on standard-
ization established in the Decision on Principles for the 3. Ordering Information
Development of International Standards, Guides and Recom-
3.1 Ordersforproductsunderthisspecificationshallinclude
mendations issued by the World Trade Organization Technical
the following information, as necessary, to describe adequately
Barriers to Trade (TBT) Committee.
the desired product:
3.1.1 Title, ASTM designation, and year of issue,
2. Referenced Documents
3.1.2 Quantity (number of dehumidifiers),
2
3.1.3 Certification if required, and
2.1 ASTM Standards:
3.1.4 Additions to the specification and supplementary
B117 Practice for Operating Salt Spray (Fog) Apparatus
requirements, if required.
B280 Specification for Seamless Copper Tube for Air Con-
ditioning and Refrigeration Field Service
4. Materials and Manufacture
D1654 Test Method for Evaluation of Painted or Coated
4.1 In addition to the requirements cited in this
Specimens Subjected to Corrosive Environments
specification, the dehumidifiers covered by this specification
D2247 Practice for Testing Water Resistance of Coatings in
shall be designed, constructed, assembled, and tested to com-
100 % Relative Humidity
ply with UL 474, UL 984, and ASHRAE 15. In the event of
1 3
This specification is under the jurisdiction of ASTM Committee F25 on Ships Available from American Society of Heating, Refrigerating, and Air-
and Marine Technology and is the direct responsibility of Subcommittee F25.11 on Conditioning Engineers, Inc. (ASHRAE), 1791 Tullie Circle, NE, Atlanta, GA
Machinery and Piping Systems. 30329, http://www.ashrae.org.
4
Current edition approved Sept. 1, 2018. Published October 2018. Originally Available from Uniform ClassificationAgent, Tariff Publication Officer, Room
approved in 1987. Last previous edition approved in 2014 as F1075 – 97 (2014). 1106, 222 South Riverside Plaza, Chicago, IL 60606.
5
DOI: 10.1520/F1075-97R18. Available from Underwriters Laboratories (UL), 2600 N.W. Lake Rd., Camas,
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or WA 98607-8542, http://www.ul.com.
6
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Available from U.S. Government Printing Office, Superintendent of
Standards volume information, refer to the standard’s Document Summary page on Documents, 732 N. Capitol St., NW, Washington, DC 20401-0001, http://
the ASTM website. www.access.gpo.gov.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
F1075 − 97 (2018)
differences between any of the requirements of this s
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.