ASTM F1615-19(2024)
(Specification)Standard Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers
Standard Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers
ABSTRACT
This specification covers the nationally recognized requirements for the cautionary information to be placed on the labels of 4- to 6-gal (15- to 23-L) open-head plastic containers (buckets), which are straight-sided vessels designed to be carried by hand to transport liquids or solids. Such warning labels will help to ensure that proper information concerning methods of safer handling is presented to the consumer.
SIGNIFICANCE AND USE
5.1 Information on the wording of the warning labels that appear on the containers will help to ensure that proper information concerning methods of safer handling is presented to the consumer.
SCOPE
1.1 This specification covers nationally recognized requirements for the cautionary information to be placed on the label of 4-gal to 6-gal (15-L to 23-L) plastic open-head containers (buckets). It is not the intent of this specification to include any other labeling requirements, such as those set forth in Federal Hazardous Substances Act (FHSA) or other applicable regulations and standards.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
Relations
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: F1615 − 19 (Reapproved 2024)
Standard Specification for
Cautionary Labeling for Five-Gallon Open-Head Plastic
Containers
This standard is issued under the fixed designation F1615; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 3.1.2 label, n—the term label is used not only to refer to
stick-on-type labels, but any other method of providing the
1.1 This specification covers nationally recognized require-
warning message, for example, melt imprinting, embossing,
ments for the cautionary information to be placed on the label
direct printing, etc.
of 4-gal to 6-gal (15-L to 23-L) plastic open-head containers
3.1.3 straight-sided vessel, n—a container having straight
(buckets). It is not the intent of this specification to include any
other labeling requirements, such as those set forth in Federal sides that may or may not taper inward or outward from the
true vertical position.
Hazardous Substances Act (FHSA) or other applicable regula-
tions and standards.
4. Requirements
1.2 The values stated in inch-pound units are to be regarded
as standard. The values given in parentheses are mathematical
4.1 General:
conversions to SI units that are provided for information only 4.1.1 The required label shall be on the bucket at the time it
and are not considered standard.
is sold or delivered to the end user of the bucket’s contents or,
in the case of a bucket intended to be sold to the public in an
1.3 This international standard was developed in accor-
empty state, at the time it is shipped to a retailer for sale to the
dance with internationally recognized principles on standard-
public.
ization established in the Decision on Principles for the
4.1.2 The label shall be placed on a side of the container
Development of International Standards, Guides and Recom-
below the handle.
mendations issued by the World Trade Organization Technical
4.1.3 All letters, words, and figures on the label shall be
Barriers to Trade (TBT) Committee.
printed in colors that contrast from the background of the label.
2. Referenced Documents
4.1.4 The label shall be difficult to remove, only then by the
use of tools or solvents.
2.1 ANSI Standard:
ANSI Z535.41991 Product Safety Signs and Labels
NOTE 1—UL Standard 969 provides guidance as to determination of
permanency of labels.
2.2 UL Standard:
UL Standard 969 Marking and Labeling Systems
4.1.5 The label, when placed on the container, shall not
thereafter be covered, obstructed, or removed by distributors or
3. Terminology
retailers.
3.1 Definitions of Terms Specific to This Standard:
4.2 Label:
3.1.1 five-gallon open-head container, n—a straight-sided
4.2.1 The label shall be a minimum of 5 in. (127 mm) high
vessel having a capacity of 4 gal (15 L) or more to 6.0 gal (23
by a minimum of 2 ⁄4 in. (70 mm) wide (see Fig. 1 for
L) or less, and having an opening at the top, height greater than
example).
10 in. (255 mm) but not over 20 in. (510 mm), and designed to
4.2.2 The label shall be in a vertical or noticeable layout
be carried by hand and to be used to transport liquids or solids.
containing the following three components: (1) a signal word
panel, (2) a pictorial, and (3) a message.
This specification is under the jurisdiction of ASTM Committee F15 on 4.2.3 The label shall have a border or another form of
Consumer Products and is the direct responsibility of Subcommittee F15.31 on
contrast that delineates it from any other information on the
Plastic Open Head Pails.
container.
Current edition approved Jan. 1, 2024. Published January 2024. Originally
4.2.4 The signal word panel shall contain the word
approved in 1995. Last previous edition approved in 2019 as F1615 – 19. DOI:
10.1520/F1615-19R24.
“WARNING” in uppercase letters, prec
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.