ASTM F3367-21a
(Practice)Standard Practice for Simplified Methods for Addressing High-Intensity Radiated Fields (HIRF) and Indirect Effects of Lightning on Aircraft
Standard Practice for Simplified Methods for Addressing High-Intensity Radiated Fields (HIRF) and Indirect Effects of Lightning on Aircraft
SCOPE
1.1 This practice covers simplified methods for addressing High-Intensity Radiated Fields (HIRF) and the Indirect Effects of Lightning (IEL) on aircraft. The material was developed through open consensus of international experts in general aviation. This information was created by focusing on Aircraft Certification Level 1, Level 2, and Level 3 Normal Category aeroplanes. The content may be more broadly applicable. It is the responsibility of the applicant to substantiate broader applicability as a specific means of compliance. The topics covered within this practice are: Overview; Minimum Design Requirements; Aeroplane Assessment Level; HIRF and IEL Safety Analysis; HIRF Compliance; IEL Compliance.
1.2 An applicant intending to propose this information as Means of Compliance for a design approval must seek guidance from their respective oversight authority (for example, published guidance from applicable CAA) concerning the acceptable use and application thereof. For information on which oversight authorities have accepted this practice (in whole or in part) as an acceptable Means of Compliance to their regulatory requirements (hereinafter “the Rules”), refer to the ASTM Committee F44 web page (www.astm.org/COMMITTEE/F44.htm).
1.3 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
Relations
Buy Standard
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation:F3367 −21a
Standard Practice for
Simplified Methods for Addressing High-Intensity Radiated
1
Fields (HIRF) and Indirect Effects of Lightning on Aircraft
This standard is issued under the fixed designation F3367; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope mendations issued by the World Trade Organization Technical
Barriers to Trade (TBT) Committee.
1.1 This practice covers simplified methods for addressing
High-Intensity Radiated Fields (HIRF) and the Indirect Effects
2. Referenced Documents
of Lightning (IEL) on aircraft. The material was developed
through open consensus of international experts in general 2.1 Following is a list of external standards referenced
aviation. This information was created by focusing onAircraft throughoutthispractice;theearliestrevisionacceptableforuse
Certification Level 1, Level 2, and Level 3 Normal Category is indicated. In all cases, later document revisions are accept-
aeroplanes. The content may be more broadly applicable. It is able if shown to be equivalent to the listed revision, or if
the responsibility of the applicant to substantiate broader otherwise formally accepted by the governing civil aviation
applicability as a specific means of compliance. The topics authority; earlier revisions are not acceptable.
2
covered within this practice are: Overview; Minimum Design
2.2 ASTM Standards:
Requirements; Aeroplane Assessment Level; HIRF and IEL
F3060 Terminology for Aircraft
Safety Analysis; HIRF Compliance; IEL Compliance.
F3230 Practice for Safety Assessment of Systems and
1.2 An applicant intending to propose this information as Equipment in Small Aircraft
Means of Compliance for a design approval must seek guid- F3309/F3309M PracticeforSimplifiedSafetyAssessmentof
ance from their respective oversight authority (for example, Systems and Equipment in Small Aircraft
3
published guidance from applicable CAA) concerning the
2.3 EUROCAE Standards:
acceptable use and application thereof. For information on
ED-14E Environmental Conditions and Test Procedures for
which oversight authorities have accepted this practice (in
Airborne Equipment
whole or in part) as an acceptable Means of Compliance to
ED-107 GuidetoCertificationofAircraftinaHigh-Intensity
their regulatory requirements (hereinafter “the Rules”), refer to
Radiated Field (HIRF) Environment
the ASTM Committee F44 web page (www.astm.org/
4
2.4 European Aviation Safety Agency (EASA):
COMMITTEE/F44.htm).
CS-23 Amdt 5 Certification Specifications for Normal-
1.3 Units—The values stated in SI units are to be regarded
Category Aeroplanes
as standard. No other units of measurement are included in this
AMC 20-136 Aircraft Electrical And Electronic System
standard.
Lightning Protection
1.4 This standard does not purport to address all of the AMC 20-158 Aircraft Electrical And Electronic System
safety concerns, if any, associated with its use. It is the High-Intensity Radiated Fields (HIRF) Protection
5
responsibility of the user of this standard to establish appro-
2.5 Federal Aviation Administration (FAA):
priate safety, health, and environmental practices and deter-
AC 20-136B Aircraft Electrical and Electronic System
mine the applicability of regulatory limitations prior to use.
Lightning Protection
1.5 This international standard was developed in accor-
dance with internationally recognized principles on standard-
ization established in the Decision on Principles for the
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Development of International Standards, Guides and Recom-
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website.
1 3
This practice is under the jurisdiction of ASTM Committee F44 on General Available from EUROCAE, 9-23 rue Paul Lafargue, "Le Triangle" building,
Aviation Aircraft and is the direct responsibility of Subcommittee F44.50 on 93200 Saint-Denis, France, https://eshop.eurocae.net/.
4
Systems and Equipment. Available from EuropeanAviation SafetyAgency (EASA), Postfach 10 12 53,
Current edition approved Nov. 1, 2021. Published December 2021. Originally D-50452 Cologne, Germany, https://www.easa.europa.eu.
5
approved in 2019. Last previous edition approved in 2021 as F3367–21. DOI: Available from Federal Aviation Administration (FAA), 800 Independence
10.1520/F3367-21A. Ave., SW,
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: F3367 − 21 F3367 − 21a
Standard Practice for
Simplified Methods for Addressing High-Intensity Radiated
1
Fields (HIRF) and Indirect Effects of Lightning on Aircraft
This standard is issued under the fixed designation F3367; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This practice covers simplified methods for addressing High-Intensity Radiated Fields (HIRF) and the Indirect Effects of
Lightning (IEL) on aircraft. The material was developed through open consensus of international experts in general aviation. This
information was created by focusing on Aircraft Certification Level 1, Level 2, and Level 3 Normal Category aeroplanes. The
content may be more broadly applicable. It is the responsibility of the applicant to substantiate broader applicability as a specific
means of compliance. The topics covered within this practice are: Overview; Minimum Design Requirements; Aeroplane
Assessment Level; HIRF and IEL Safety Analysis; HIRF Compliance; IEL Compliance.
1.2 An applicant intending to propose this information as Means of Compliance for a design approval must seek guidance from
their respective oversight authority (for example, published guidance from applicable CAA) concerning the acceptable use and
application thereof. For information on which oversight authorities have accepted this practice (in whole or in part) as an
acceptable Means of Compliance to their regulatory requirements (hereinafter “the Rules”), refer to the ASTM Committee F44 web
page (www.astm.org/COMMITTEE/F44.htm).
1.3 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this
standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of
regulatory limitations prior to use.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization
established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued
by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents
2.1 Following is a list of external standards referenced throughout this practice; the earliest revision acceptable for use is indicated.
In all cases, later document revisions are acceptable if shown to be equivalent to the listed revision, or if otherwise formally
accepted by the governing civil aviation authority; earlier revisions are not acceptable.
2
2.2 ASTM Standards:
1
This practice is under the jurisdiction of ASTM Committee F44 on General Aviation Aircraft and is the direct responsibility of Subcommittee F44.50 on Systems and
Equipment.
Current edition approved May 1, 2021Nov. 1, 2021. Published May 2021December 2021. Originally approved in 2019. Last previous edition approved in 20202021 as
F3367–20.–21. DOI: 10.1520/F3367-21.10.1520/F3367-21A.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
F3367 − 21a
F3060 Terminology for Aircraft
F3230 Practice for Safety Assessment of Systems and Equipment in Small Aircraft
F3309/F3309M Practice for Simplified Safety Assessment of Systems and Equipment in Small Aircraft
3
2.3 EUROCAE Standards:
ED-14E Environmental Conditions and Test Procedures for Airborne Equipment
ED-107 Guide to Certification of Aircraft in a High-Intensity Radiated Field (HIRF) Environment
4
2.4 European Aviation Safety Agency (EASA):
CS-23 Amdt 5 Certification Specifications for Normal-Category Aeroplanes
AMC 20-136 Aircraft Electrical And Electronic System Lightning Protection
AMC 20-158 Aircraft Electrical And Electronic System High-Intensity Radiated Fields (HIRF) Protection
5
2.5 Federal Aviation Administration (FAA):
AC 20-136B Aircraft Electrical and Electro
...
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: F3367 − 21a
Standard Practice for
Simplified Methods for Addressing High-Intensity Radiated
1
Fields (HIRF) and Indirect Effects of Lightning on Aircraft
This standard is issued under the fixed designation F3367; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope mendations issued by the World Trade Organization Technical
Barriers to Trade (TBT) Committee.
1.1 This practice covers simplified methods for addressing
High-Intensity Radiated Fields (HIRF) and the Indirect Effects
2. Referenced Documents
of Lightning (IEL) on aircraft. The material was developed
through open consensus of international experts in general 2.1 Following is a list of external standards referenced
aviation. This information was created by focusing on Aircraft throughout this practice; the earliest revision acceptable for use
Certification Level 1, Level 2, and Level 3 Normal Category is indicated. In all cases, later document revisions are accept-
aeroplanes. The content may be more broadly applicable. It is able if shown to be equivalent to the listed revision, or if
the responsibility of the applicant to substantiate broader otherwise formally accepted by the governing civil aviation
applicability as a specific means of compliance. The topics authority; earlier revisions are not acceptable.
covered within this practice are: Overview; Minimum Design 2
2.2 ASTM Standards:
Requirements; Aeroplane Assessment Level; HIRF and IEL
F3060 Terminology for Aircraft
Safety Analysis; HIRF Compliance; IEL Compliance.
F3230 Practice for Safety Assessment of Systems and
1.2 An applicant intending to propose this information as Equipment in Small Aircraft
Means of Compliance for a design approval must seek guid- F3309/F3309M Practice for Simplified Safety Assessment of
ance from their respective oversight authority (for example, Systems and Equipment in Small Aircraft
3
published guidance from applicable CAA) concerning the
2.3 EUROCAE Standards:
acceptable use and application thereof. For information on
ED-14E Environmental Conditions and Test Procedures for
which oversight authorities have accepted this practice (in
Airborne Equipment
whole or in part) as an acceptable Means of Compliance to
ED-107 Guide to Certification of Aircraft in a High-Intensity
their regulatory requirements (hereinafter “the Rules”), refer to
Radiated Field (HIRF) Environment
the ASTM Committee F44 web page (www.astm.org/
4
2.4 European Aviation Safety Agency (EASA):
COMMITTEE/F44.htm).
CS-23 Amdt 5 Certification Specifications for Normal-
1.3 Units—The values stated in SI units are to be regarded
Category Aeroplanes
as standard. No other units of measurement are included in this
AMC 20-136 Aircraft Electrical And Electronic System
standard.
Lightning Protection
1.4 This standard does not purport to address all of the AMC 20-158 Aircraft Electrical And Electronic System
safety concerns, if any, associated with its use. It is the High-Intensity Radiated Fields (HIRF) Protection
5
responsibility of the user of this standard to establish appro-
2.5 Federal Aviation Administration (FAA):
priate safety, health, and environmental practices and deter-
AC 20-136B Aircraft Electrical and Electronic System
mine the applicability of regulatory limitations prior to use.
Lightning Protection
1.5 This international standard was developed in accor-
dance with internationally recognized principles on standard-
ization established in the Decision on Principles for the
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Development of International Standards, Guides and Recom-
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website.
1 3
This practice is under the jurisdiction of ASTM Committee F44 on General Available from EUROCAE, 9-23 rue Paul Lafargue, "Le Triangle" building,
Aviation Aircraft and is the direct responsibility of Subcommittee F44.50 on 93200 Saint-Denis, France, https://eshop.eurocae.net/.
4
Systems and Equipment. Available from European Aviation Safety Agency (EASA ), Postfach 10 12 53,
Current edition approved Nov. 1, 2021. Published December 2021. Originally D-50452 Cologne, Germany, https://www.easa.europa.eu.
5
approved in 2019. Last previous edition approved in 2021 as F3367–21. DOI: Available from Federal Aviation Administration (FAA), 800 Independence
10.1520/F3367-21A. Ave., SW, Washington, DC 20591, http://rgl.faa.gov.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Consho
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.