iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM D8357-21

(Classification)

Standard Classification for Cannabis/Hemp Flower Vaporizers

Standard Classification for Cannabis/Hemp Flower Vaporizers

SIGNIFICANCE AND USE
4.1 This classification defines various types of cannabis flower vaporizer devices.  
4.2 This classification shall be applicable to any vaporizer devices intended to be used to facilitate the vaporization of cannabis flower intended for inhalation, regardless of the type of cannabis plant from which the flower was derived. There is no distinction between flower intended for inhalation from a cannabis plant that can be classified as “hemp” and flower that cannot, other than the delta-9-THC content.  
4.3 The purpose of this classification is to standardize the naming of device types under the classification.  
4.4 The classification system breaks the device types into three main categories and three subcategories. These are intended to aid buyers and sellers of these devices in accurately defining the products they are buying or selling. This classification system shall also aid in the understanding of the various types of cannabis flower vaporizing devices that exist in the marketplace by reducing them down to their most common denominator: are they handheld or desk top or other “X”, and are they manual, electronic or distinct.  
4.5 This classification will provide clarity to industry, government, and the public on terminology, and the intended product usage of cannabis flower vaporizers.  
4.6 This classification standard provides a uniform set of usage definitions within the cannabis industry. Included within this classification is a set of figures that outlines some individual components and aspects of various types of cannabis flower vaporizers.  
4.7 This classification is not intended to define all terminology, design, mechanical, physical, or universal functions and impacts of different technologies attributable to cannabis flower vaporizers. Such characteristics and category details and nomenclature will be defined in Guide D8373.  
4.8 Additional specifications, guides and test methods should be created to further international standards in this sp...
SCOPE
1.1 This standard shall classify various types of cannabis/hemp flower vaporizer devices.  
1.2 This classification differentiates between the intended use of each type of cannabis/hemp flower vaporizer devices.  
1.3 This classification shall provide examples of each type of cannabis/hemp flower vaporizer devices. Examples and pictorials shown in the annexes and appendixes or described in this classification are not intended to be all-inclusive and are included only as an aid in understanding and comprehension of the classification system.  
1.4 Vaporizer devices intended for use with materials other than cannabis flower, a dried cannabis flower, or ground dried cannabis flower, or combination thereof, are not in the scope of this classification.  
1.5 This classification shall apply to vaporizer devices used to consume cannabis flower from a cannabis plant regardless of the type of cannabis plant from which it is derived. For the sake of brevity, the term “cannabis” shall be used from now on to refer to any type of cannabis plant (cannabis/hemp).  
1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Information

Status
Published
Publication Date
14-Feb-2021
ICS
11.120.10 - Medicaments
65.020.20 - Plant growing
Technical Committee
D37 - Cannabis
Drafting Committee
D37.08 - Personal/Household-Use Cannabis Devices and Appliances
Current Stage
Ref Project

Buy Standard

ASTM D8357-21 - Standard Classification for Cannabis/Hemp Flower VaporizersASTM D8357-21 - Standard Classification for Cannabis/Hemp Flower Vaporizers
PreviousNext
Standard
ASTM D8357-21 - Standard Classification for Cannabis/Hemp Flower Vaporizers
English language
6 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation:D8357 −21
Standard Classification for
1
Cannabis/Hemp Flower Vaporizers
This standard is issued under the fixed designation D8357; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 2. Referenced Documents
2
2.1 ASTM Standards:
1.1 This standard shall classify various types of cannabis/
D8270 Terminology Relating to Cannabis
hemp flower vaporizer devices.
D8373 Guide for Cannabis/Hemp Flower Vaporizers
1.2 This classification differentiates between the intended
use of each type of cannabis/hemp flower vaporizer devices.
3. Terminology
1.3 This classification shall provide examples of each type
3.1 Definitions:
of cannabis/hemp flower vaporizer devices. Examples and
3.1.1 For other definitions used in this classification, refer to
pictorials shown in the annexes and appendixes or described in
the terms developed by Subcommittee D37.91 on Terminology
this classification are not intended to be all-inclusive and are
Relating to Cannabis and Terminology D8270.
included only as an aid in understanding and comprehension of
3.2 Definitions of Terms Specific to This Standard:
the classification system.
3.2.1 cannabis flower, n—the whole inflorescence of a
cannabis plant.
1.4 Vaporizer devices intended for use with materials other
than cannabis flower, a dried cannabis flower, or ground dried
3.2.2 dried cannabis flower, n—the whole inflorescence of a
cannabis flower, or combination thereof, are not in the scope of
cannabis plant which has been processed to reduce moisture
this classification.
content through drying or curing, or both.
1.5 This classification shall apply to vaporizer devices used
3.2.2.1 Discussion—Synonymous with dried cannabis flos.
to consume cannabis flower from a cannabis plant regardless of
3.2.3 ground dried cannabis flower, n—dried cannabis
thetypeofcannabisplantfromwhichitisderived.Forthesake
flower that has gone through some form of size reduction.
of brevity, the term “cannabis” shall be used from now on to
3.2.3.1 Discussion—Typically adult-use and medicinal-use
refer to any type of cannabis plant (cannabis/hemp).
consumers grind dried cannabis flower mechanically with the
1.6 The values stated in SI units are to be regarded as
use of a personal or handheld grinder, or by physically
standard. No other units of measurement are included in this
separating the dried cannabis flower by hand.
standard.
3.2.4 desktop, n—any personal consumption device that
explicitly is designed to rest on a stable horizontal surface
1.7 This standard does not purport to address all of the
safety concerns, if any, associated with its use. It is the while in use.
responsibility of the user of this standard to establish appro-
3.2.5 distinct vaporizer, n—any vaporizer, not manual or
priate safety, health, and environmental practices and deter-
electronic under the classification scheme, that is different, as
mine the applicability of regulatory limitations prior to use.
derived from innovation and shall have a method to vaporize
1.8 This international standard was developed in accor-
cannabis flower and a method for the user to consume or inhale
dance with internationally recognized principles on standard-
its vapour as sanctioned by the authority under jurisdiction.
ization established in the Decision on Principles for the
3.2.6 electronic vaporizer, n—any vaporizer with an inte-
Development of International Standards, Guides and Recom-
grated heat source.
mendations issued by the World Trade Organization Technical
3.2.7 handheld, n—any personal consumption device that is
Barriers to Trade (TBT) Committee.
explicitly designed to be held in the user’s hand.
1
This classification is under the jurisdiction of ASTM Committee D37 on
2
Cannabis and is the direct responsibility of Subcommittee D37.08 on Cannabis For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Devices and Appliances. contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Current edition approved Feb. 15, 2021. Published June 2021. DOI: 10.1520/ Standards volume information, refer to the standard’s Document Summary page on
D8357-21. the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
D8357−21
TABLE 1 Classification for Cannabis Flower Vaporizer
Main Classification System
Sub Classification System
A. Handheld B. Desktop C. Ot
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM D8309-21(Guide)
Standard Guide for Stability Testing of Cannabis-Based Products

SIGNIFICANCE AND USE
4.1 Stability testing provides evidence on how the quality and safety of cannabis-based product varies with time under the influence of a variety of environmental factors such as temperature, humidity, and light. The stability testing will also establish a re-test period for the cannabis product or a shelf-life for the cannabis product under recommended storage conditions. Recommended test conditions are based on ICH Q1A.  
4.2 The choice of test conditions defined in this guideline is based on an analysis of the effects of climatic conditions in the three regions of the European Commission (EC), Japan and the United States. The mean kinetic temperature in any part of the world can be derived from climatic data, and the world can be divided into four climatic zones, I-IV.  
4.3 Requirements of regulatory bodies or governmental departments supersede the recommendations in this guide.
SCOPE
1.1 This guide is applicable to commercial processors and manufacturers engaged in the processing, testing, packaging, labeling, and storage of cannabis products intended for human consumption, including those derived from hemp. Hemp seed and products derived from hemp seed are excluded from the scope of this guide This guide describes the minimum requirements for conducting stability testing of new cannabis products with the purpose of determining appropriate storage conditions and shelf-life.  
1.2 This guide applies to all cannabis-derived products commercially manufactured and distributed for consumer use, regardless of the type of cannabis plant from which they were derived.  
1.3 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    6 pages
    English language
    sale 15% off
ASTM
ASTM D8374-21(Guide)
Standard Guide for Personal Cannabis/Hemp Plant Growing Appliances

SIGNIFICANCE AND USE
4.1 This guide is intended to educate new and experienced users of personal cannabis/hemp plant growing appliances on the various characteristics that can be available in personal cannabis/hemp plant growing appliances.  
4.2 This guide will outline characteristics of personal cannabis/hemp plant growing appliances, which includes individual components, design elements, and basic universal functions.  
4.3 This guide will categorize common characteristics using categories based on different technologies and describe in simple terms the details attributable to each category but is not intended to be all inclusive.  
4.4 This guide will serve to provide clarity to industry, government, and the public on terminology, and universal functions of personal cannabis/hemp plant growing appliances.  
4.5 Reference to a type characteristic in this guide is not intended in any manner to denote endorsement or approval of said type by ASTM International.
SCOPE
1.1 This guide is intended to define characteristics, functions and technologies commonly present in personal cannabis/hemp plant growing appliances  
1.2 This guide will provide clarity and understanding to the industry, government, consumers and the general public on different features and technologies that may be present and/or are used in the design and manufacture of personal cannabis/hemp plant growing appliances.  
1.3 This guide shall be used in conjunction with Classification D8390.  
1.4 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    6 pages
    English language
    sale 15% off
ASTM
ASTM D8309-21(Guide)
Standard Guide for Stability Testing of Cannabis-Based Products

SIGNIFICANCE AND USE
4.1 Stability testing provides evidence on how the quality and safety of cannabis-based product varies with time under the influence of a variety of environmental factors such as temperature, humidity, and light. The stability testing will also establish a re-test period for the cannabis product or a shelf-life for the cannabis product under recommended storage conditions. Recommended test conditions are based on ICH Q1A.  
4.2 The choice of test conditions defined in this guideline is based on an analysis of the effects of climatic conditions in the three regions of the European Commission (EC), Japan and the United States. The mean kinetic temperature in any part of the world can be derived from climatic data, and the world can be divided into four climatic zones, I-IV.  
4.3 Requirements of regulatory bodies or governmental departments supersede the recommendations in this guide.
SCOPE
1.1 This guide is applicable to commercial processors and manufacturers engaged in the processing, testing, packaging, labeling, and storage of cannabis products intended for human consumption, including those derived from hemp. Hemp seed and products derived from hemp seed are excluded from the scope of this guide This guide describes the minimum requirements for conducting stability testing of new cannabis products with the purpose of determining appropriate storage conditions and shelf-life.  
1.2 This guide applies to all cannabis-derived products commercially manufactured and distributed for consumer use, regardless of the type of cannabis plant from which they were derived.  
1.3 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    6 pages
    English language
    sale 15% off
ASTM
ASTM D8374-21(Guide)
Standard Guide for Personal Cannabis/Hemp Plant Growing Appliances

SIGNIFICANCE AND USE
4.1 This guide is intended to educate new and experienced users of personal cannabis/hemp plant growing appliances on the various characteristics that can be available in personal cannabis/hemp plant growing appliances.  
4.2 This guide will outline characteristics of personal cannabis/hemp plant growing appliances, which includes individual components, design elements, and basic universal functions.  
4.3 This guide will categorize common characteristics using categories based on different technologies and describe in simple terms the details attributable to each category but is not intended to be all inclusive.  
4.4 This guide will serve to provide clarity to industry, government, and the public on terminology, and universal functions of personal cannabis/hemp plant growing appliances.  
4.5 Reference to a type characteristic in this guide is not intended in any manner to denote endorsement or approval of said type by ASTM International.
SCOPE
1.1 This guide is intended to define characteristics, functions and technologies commonly present in personal cannabis/hemp plant growing appliances  
1.2 This guide will provide clarity and understanding to the industry, government, consumers and the general public on different features and technologies that may be present and/or are used in the design and manufacture of personal cannabis/hemp plant growing appliances.  
1.3 This guide shall be used in conjunction with Classification D8390.  
1.4 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    6 pages
    English language
    sale 15% off
ASTM
ASTM A370-23(Test Method)
Standard Test Methods and Definitions for Mechanical Testing of Steel Products

SIGNIFICANCE AND USE
4.1 The primary use of these test methods is testing to determine the specified mechanical properties of steel, stainless steel, and related alloy products for the evaluation of conformance of such products to a material specification under the jurisdiction of ASTM Committee A01 and its subcommittees as designated by a purchaser in a purchase order or contract.  
4.1.1 These test methods may be and are used by other ASTM Committees and other standards writing bodies for the purpose of conformance testing.  
4.1.2 The material condition at the time of testing, sampling frequency, specimen location and orientation, reporting requirements, and other test parameters are contained in the pertinent material specification or in a general requirement specification for the particular product form.  
4.1.3 Some material specifications require the use of additional test methods not described herein; in such cases, the required test method is described in that material specification or by reference to another appropriate test method standard.  
4.2 These test methods are also suitable to be used for testing of steel, stainless steel and related alloy materials for other purposes, such as incoming material acceptance testing by the purchaser or evaluation of components after service exposure.  
4.2.1 As with any mechanical testing, deviations from either specification limits or expected as-manufactured properties can occur for valid reasons besides deficiency of the original as-fabricated product. These reasons include, but are not limited to: subsequent service degradation from environmental exposure (for example, temperature, corrosion); static or cyclic service stress effects, mechanically-induced damage, material inhomogeneity, anisotropic structure, natural aging of select alloys, further processing not included in the specification, sampling limitations, and measuring equipment calibration uncertainty. There is statistical variation in all aspects of mechanical testin...
SCOPE
1.1 These test methods2 cover procedures and definitions for the mechanical testing of steels, stainless steels, and related alloys. The various mechanical tests herein described are used to determine properties required in the product specifications. Variations in testing methods are to be avoided, and standard methods of testing are to be followed to obtain reproducible and comparable results. In those cases in which the testing requirements for certain products are unique or at variance with these general procedures, the product specification testing requirements shall control.  
1.2 The following mechanical tests are described:    
Sections  
Tension  
7 to 14  
Bend  
15  
Hardness  
16  
Brinell  
17  
Rockwell  
18  
Portable  
19  
Impact  
20 to 30  
Keywords  
32  
1.3 Annexes covering details peculiar to certain products are appended to these test methods as follows:    
Annex  
Bar Products  
Annex A1  
Tubular Products  
Annex A2  
Fasteners  
Annex A3  
Round Wire Products  
Annex A4  
Significance of Notched-Bar Impact Testing  
Annex A5  
Converting Percentage Elongation of Round Specimens to
Equivalents for Flat Specimens  
Annex A6    
Testing Multi-Wire Strand  
Annex A7  
Rounding of Test Data  
Annex A8  
Methods for Testing Steel Reinforcing Bars  
Annex A9  
Procedure for Use and Control of Heat-cycle Simulation  
Annex A10  
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.5 When these test methods are referenced in a metric product specification, the yield and tensile values may be determined in inch-pound (ksi) units then converted into SI (MPa) units. The elongation determined in inch-pound gauge lengths of 2 in. or 8 in. may be report...

  • Standard
    51 pages
    English language
    sale 15% off
  • Standard
    51 pages
    English language
    sale 15% off
ASTM
ASTM F3565-23(Practice)
Standard Practice for Electrofusion Joining Polyethylene (PE) Pipe and Fittings for Pressure Pipe Service

SIGNIFICANCE AND USE
4.1 Using the procedures and apparatus in Sections 8 and 9 and the manufacturer's instructions, pressure-tight joints as strong as the pipe itself can be made between manufacturer-recommended combinations of pipe and fittings. See Specification F1055 for performance requirements of polyethylene electrofusion fittings.
SCOPE
1.1 This practice describes procedures for making joints suitable for pressure service with polyethylene (PE) pipe and fittings by means of electrofusion joining techniques in, but not limited to, a field environment. Other suitable electrofusion joining procedures are available from various sources including fitting manufacturers. This standard does not purport to address all possible electrofusion joining procedures, or to preclude the use of qualified procedures developed by other parties that have been proven to produce reliable electrofusion joints. (Note 1)
Note 1: Reference to the manufacturer in this practice refers to the electrofusion fitting manufacturer.  
1.2 The parameters and procedure are applicable only to joining polyethylene pipe and fittings (Note 2) which are intended for PE fuel gas pipe per Specification D2513 and PE potable water, sewer and industrial pipe manufactured per Specification F714, Specification D3035, Specification F2619, and AWWA C901 and C906.
Note 2: Commercially available materials classified with a thermoplastic pipe material designation code beginning with PE 14, PE 23, PE 24, PE 27, PE 33, PE 34, PE 36, and PE 46, and PE 47 in accordance with Specification D3350 and Terminology F412 are generally acceptable for electrofusion joining using this practice. Consult with the pipe or fitting manufacturer for specific compatibility information.  
1.3 Parts that are within the dimensional tolerances given in present ASTM specifications are required to produce sound joints between polyethylene pipe and fittings when using the joining techniques described in this practice.  
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.5 The text of this practice references notes, footnotes, and appendices which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the practice.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    7 pages
    English language
    sale 15% off
ASTM
ASTM D5141-23(Test Method)
Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device

SIGNIFICANCE AND USE
5.1 This test method is used to determine the filtering efficiency and flow rate of the filtration component of a sediment retention device, such as a silt fence, a silt barrier, or a silt curtain, for specific soil tested.  
5.2 This test method may be used for the design of the filtration component of a sediment retention device to meet requirements of regulatory agencies in filtering efficiency or flow rate for the specific soil tested.  
5.2.1 The designer can use this test method to determine the spacing between sediment retention devices.  
5.3 This test method is intended for performance evaluation, as the results will depend on the specific soil evaluated. Unless testing with the default soil is desired, it is recommended that the user or representative perform the test to pre-approve products, as sediment retention device manufacturers are not typically equipped to handle or test soil requirements.  
5.4 This test method provides a means of evaluating the filtration component of sediment retention devices with different soils under various conditions that simulate the conditions that exist in a sediment retention device installation. This test method may be used to simulate several storm events on the same sediment retention device specimen. Therefore, the number of times this test is repeated per specimen is dependent upon the user and the site conditions.
SCOPE
1.1 This test method is used to determine the filtering efficiency and the flow rate of the filtration component of a sediment retention device, such as a silt fence, silt barrier, or inlet protector.  
1.1.1 The results are shown as a percentage for filtering efficiency and cubic metres per square metre per minute (m3/m2/min) or gallons per square foot per minute (gal/ft2/min) for flow rate.  
1.1.2 The filtering efficiency indicates the percent of sediment removed from sediment-laden water.  
1.1.3 The flow rate is the average rate of passage of the sediment-laden water through the filtration component of a sediment retention device.  
1.2 This test method requires several specialized pieces of equipment, such as an integrated water sampler and an analytical balance, or a vacuum filtration system. At the client’s discretion, the test soil is either a site-specific soil or a soil that is representative of a target default gradation.  
1.3 The values stated in SI units are the standard, while the inch-pound units are provided for information. The values expressed in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 15% off
ASTM
ASTM F2647-07(2023)(Guide)
Standard Guide for Approved Methods of Installing a CVS (Central Vacuum System)

SIGNIFICANCE AND USE
4.1 The suggestions of this guide are intended to provide proper installation materials and practices to be used during the installation of a central-vacuum system.
SCOPE
1.1 This guide demonstrates proper methods for installing a central-vacuum system.  
1.2 Appendix X1 contains additional sources of information that may be helpful to the user of this guide.  
1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    7 pages
    English language
    sale 15% off
ASTM
ASTM F2886-17(2023)(Specification)
Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications

ABSTRACT
This specification covers chemical, mechanical, and metallurgical general requirements for metal injection molded (MIM) cobalt-28chromium-6molybddenum components to be used in manufacturing surgical implants. In this specification, the MIM components covered may have been densified beyond their as-sintered density by post-sinter processing. For the chemical requirements, the components supplied in this specification must conform in accordance to the chemical requirements specified herein in Table 1. The product analysis tolerances must also conform to the product tolerances presented in Table 2. The specification also enumerates the mechanical requirements for MIM components wherein the tensile properties of the MIM must conform to the mechanical properties in Table 3. The microstructural requirements and specimen preparation shall be in accordance with Guide E3 and Practice E407.
SCOPE
1.1 This specification covers chemical, mechanical, and metallurgical requirements for metal injection molded (MIM) cobalt-28chromium-6molybdenum components to be used in the manufacture of surgical implants  
1.2 The MIM components covered by this specification may have been densified beyond their as-sintered density by post-sinter processing.  
1.3 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    5 pages
    English language
    sale 15% off
ASTM
ASTM A480/A480M-23a(Specification)
Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

ABSTRACT
This specification covers general requirements for flat-rolled stainless and heat-resisting steel plate, sheet, and strip. The steel shall be made by one of the following processes: electric-arc, electric-induction, or other suitable processes. Heat and product analyses shall conform to the chemical requirements for each of the specific elements. The material shall undergo mechanical tests such as tension test, hardness test, and bend test. Special tests like intergranular corrosion test, permeability test, Charpy impact testing and tests for detrimental intermetallic phases in wrought duplex stainless steels shall be also be performed when required.
SCOPE
1.1 This specification2 covers a group of general requirements that, unless otherwise specified in the purchase order or in an individual specification, shall apply to rolled steel plate, sheet, and strip, under each of the following specifications issued by ASTM: Specifications A240/A240M, A263, A264, A265, A666, A693, A793, and A895.  
1.2 In the case of conflict between a requirement of a product specification and a requirement of this specification, the product specification shall prevail. In the case of conflict between a requirement of the product specification or a requirement of this specification and a more stringent requirement of the purchase order, the purchase order shall prevail. The purchase order requirements shall not take precedence if they, in any way, violate the requirements of the product specification or this specification; for example, by waiving a test requirement or by making a test requirement less stringent.  
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The SI units are shown in brackets, except that when A480M is specified, Annex A3 shall apply for the dimensional tolerances and not the bracketed SI values in Annex A2. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.  
1.4 This specification and the applicable material specifications are expressed in both inch-pound and SI units. However, unless the order specifies the applicable “M” specification designation [SI units], the material shall be furnished in inch-pound units.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    26 pages
    English language
    sale 15% off
  • Technical specification
    26 pages
    English language
    sale 15% off