Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures

UAP of 4 months (TC Res 7/2000) (CC/000717)
Update of TC forecast for stage 40/49 following TC resolutions dated 2001-06-19/20

Festeingestellte Druckregelgeräte mit einem Höchstreglerdruck bis einschließlich 200 mbar, und einem Durchfluss bis einschließlich 4 kg/h für Butan, Propan und deren Gemische sowie die dazugehörige Sicherheitseinrichtungen

Détendeurs à réglage fixe, à pression de détente maximale inférieure ou égale à 200 mbar, de débit inférieur ou égal à 4 kg/h, et leurs dispositifs de sécurité associés pour butane, propane ou leurs mélanges

Nizkotlačni nenastavljivi regulatorji z največjim izhodnim tlakom do vključno 200 mbar, s pretokom največ 4 kg/h in pripadajočimi varnostnimi napravami za butan, propan ali njuni zmesi - Dopolnilo A1

General Information

Status
Withdrawn
Publication Date
16-Sep-2003
Withdrawal Date
11-Jun-2013
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
12-Jun-2013
Completion Date
12-Jun-2013

Relations

Buy Standard

Amendment
EN 12864:2002/A1:2004
English language
55 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12864:2002/A1:2004
01-januar-2004
1L]NRWODþQLQHQDVWDYOMLYLUHJXODWRUML]QDMYHþMLPL]KRGQLPWODNRPGRYNOMXþQR
PEDUVSUHWRNRPQDMYHþNJKLQSULSDGDMRþLPLYDUQRVWQLPLQDSUDYDPL]DEXWDQ
SURSDQDOLQMXQL]PHVL'RSROQLOR$
Low-pressure, non adjustable regulators having a maximum outlet pressure of less than
or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated
safety devices for butane, propane or their mixtures
Festeingestellte Druckregelgeräte mit einem Höchstreglerdruck bis einschließlich 200
mbar, und einem Durchfluss bis einschließlich 4 kg/h für Butan, Propan und deren
Gemische sowie die dazugehörige Sicherheitseinrichtungen
Détendeurs a réglage fixe, a pression de détente maximale inférieure ou égale a 200
mbar, de débit inférieur ou égal a 4 kg/h, et leurs dispositifs de sécurité associés pour
butane, propane ou leurs mélanges
Ta slovenski standard je istoveten z: EN 12864:2001/A1:2003
ICS:
23.060.40
SIST EN 12864:2002/A1:2004 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 12864:2001/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2003
ICS 23.060.40
English version
Low-pressure, non adjustable regulators having a maximum
outlet pressure of less than or equal to 200 mbar, with a
capacity of less than or equal to 4 kg/h, and their associated
safety devices for butane, propane or their mixtures
Détendeurs à réglage fixe, à pression de détente maximale Festeingestellte Druckregelgeräte mit einem
inférieure ou égale à 200 mbar, de débit inférieur ou égal à Höchstreglerdruck bis einschließlich 200 mbar, und einem
4 kg/h, et leurs dispositifs de sécurité associés pour Durchfluss bis einschließlich 4 kg/h für Butan, Propan und
butane, propane ou leurs mélanges deren Gemische sowie die dazugehörige
Sicherheitseinrichtungen
This amendment A1 modifies the European Standard EN 12864:2001; it was approved by CEN on 27 June 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12864:2001/A1:2003 E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 12864:2001/A1:2003 (E)
Foreword
This amendment EN 12864:2001/A1:2003 to EN 12864:2001 has been prepared by Technical Committee
CEN /TC 181 " Dedicated liquefied petroleum gas appliances", the secretariat of which is held by AFNOR.
This amendment to the European Standard EN 12864 has been prepared under a mandate given to CEN by the
European Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s).
This Amendment to the European Standard shall be given the status of a national standard, either
EN 12864:2001
by publication of an identical text or by endorsement, at the latest by March 2004, and conflicting national
standards shall be withdrawn at the latest by March 2004.
This Amendment modifies EN 12864:2001. It has been prepared to take into account the commentaries received
during the formal vote on EN 12864 and to amend the figures of annexes G and H.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,
Slovakia, Spain, Sweden, Switzerland and the United Kingdom.
2

---------------------- Page: 3 ----------------------

EN 12864:2001/A1:2003 (E)
2 Normative references
Add the following references :
EN 560 Gas welding equipment _ Hose connections for equipment for welding, cutting and allied
processes.
EN ISO 8434-1 Metallic tube connections for fluid power and general use - Part 1: 24° compre
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.