EN ISP 10613-3:1996
(Main)Information technology - International Standardized Profile RA - Relaying the Connectionless-mode Network Service - Part 3: CSMA/CD LAN subnetwork-dependent, media-dependent requirements (ISO/IEC ISP 10613-3:1994)
Information technology - International Standardized Profile RA - Relaying the Connectionless-mode Network Service - Part 3: CSMA/CD LAN subnetwork-dependent, media-dependent requirements (ISO/IEC ISP 10613-3:1994)
Technologie de l'information - Profil normalisé international RA - Relais de service de réseau en mode sans connexion - Partie 3: Prescriptions dépendantes du milieu, dépendantes du sous-réseau CSMA/CD LAN (ISO/IEC ISP 10613-3:1994)
Information technology - International Standardized Profile RA - Relaying the Connectionless-mode Network Service - Part 3: CSMA/CD LAN subnetwork-dependent, media-dependent requirements (ISO/IEC ISP 10613-3:1994)
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Information technology - International Standardized Profile RA - Relaying the Connectionless-mode Network Service - Part 3: CSMA/CD LAN subnetwork-dependent, media-dependent requirements (ISO/IEC ISP 10613-3:1994)Technologie de l'information - Profil normalisé international RA - Relais de service de réseau en mode sans connexion - Partie 3: Prescriptions dépendantes du milieu, dépendantes du sous-réseau CSMA/CD LAN (ISO/IEC ISP 10613-3:1994)Information technology - International Standardized Profile RA - Relaying the Connectionless-mode Network Service - Part 3: CSMA/CD LAN subnetwork-dependent, media-dependent requirements (ISO/IEC ISP 10613-3:1994)35.100.05UHãLWYHMultilayer applicationsICS:Ta slovenski standard je istoveten z:EN ISP 10613-3:1996SIST EN ISP 10613-3:1997en01-december-1997SIST EN ISP 10613-3:1997SLOVENSKI
STANDARD
SIST EN ISP 10613-3:1997
SIST EN ISP 10613-3:1997
SIST EN ISP 10613-3:1997
INTERNATIONAL STANDARDIZED PROFILE lSO/IEC ISP 10613-3 First edition 1994-05-15 Information technology - International Standardized Profile RA - Relaying the Connectionless-mode Network Service - Part 3: CSMA/CD LAN subnetwork-dependent, media-dependent requirements Technologies de I’information - Profil normalk in temational RA - Relais de Service de r&eau en mode sans connexion - Partie 3: Prescriptions dependan tes du milieu, dependan tes du sous-r&eau CSMA/CD LAN Reference number ISO/IEC ISP 10613-3:1994(E) SIST EN ISP 10613-3:1997
ISO/IEC ISP 10613-3: 1994(E) Foreword . . . . 111 Introduction . V 1 Scope . 1 2 Normative references . 1 3 Definitions . 2 4 Abbreviations . 2 5 Requirements . 3 5.1 Static Conformance Requirements . 3 5.2 Dynamit Conformance Requirements . 5 Annex A ISPICS Requirements List (normative) . 6 A.l Introduction . 6 A.2 Notation and Conventions . 6 A.3 IPRL for ISO 8473 . 6 A.4 IPRL for ISO 9542 . 6 A.5 IPRL for ISO 8802-2 . 7 A.6 IPRL for ISO/IEC 8802-3 . 7 Annex B Assumed Base Standard PICS Proforma (normative) . 8 B.1 Introduction . 8 B.2 ISO/IEC 8802-3 . 8 Annex C Recommendations (informative) . 10 C.l Introduction . 10 C.2 ISO 9542 Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Contents Page 0 ISO/IEC 1994 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronie or mechanical, including photocopying and microfilm, without Permission in writing from the publisher. ISO/IEC Copyright Office l Case postale 56 l CH-121 1 Geneve l Switzerland Printed in Switzerland ii SIST EN ISP 10613-3:1997
0 ISO/IEC ISO/IEC ISP 10613-3: 1994(E) Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized System for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of’ International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, govemmental and non-govemmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. In addition to developing International Standards, ISO/IEC JTCl has created a Special Group on Functional Standardization for the elaboration of International S tandardized Profiles. An International Standardized Profile is an internationally agreed, harmonized document which identifies a Standard or group of Standards, together with Options and Parameters, necessary to accomplish a function or a set of functions. Draft International Standardized Profiles are circulated to national bodies for voting. Publication as International Standardized Profile requires approval by at least 75 % of the national bodies casting a vote. International Standardized Profile ISO/IEC ISP 10613-3 was prepared with the collaboration of - Asia-Oceania Workshop (AOW); - European Workshop for Open Systems (EWOS); - Open Systems Environment Implernentors’ Workshop (OIW). ISO/IEC ISP 10613 consists of several parts, under the general title Information technology - International Standardized Profile RA - Relaying the Connectionless-mode Network Service: Part 1: Subnetwork-independent requirements - Part 2: LAN subnetwork-dependent, media-independent requirements - Part 3: CSMAICD LAN subnetwork-dependent , media-dependent requirements Part 4: FDDI LAN subnetwork-dependent, media-dependent requirements - Part 5: Definition of Profile RA51.51, relaying the Connectionless-mode Network Service between CSMAICD LAN subnetworks - Part 6:Definition of Profile RA51.54, relaying the Connectionless-mode Network Service between CSMAICD LAN subnetworks and FDDI LAN subnetworks - Part 7: PSDN subnetwork-dependent, permanent access media-dependent requirements for calls over a - Part 8: Definition of Profile RA51 .llll, relaying the Connectionless-mode Network Service bet-ween CSMAICD LAN subnetworks and PSDNs using virtual calls over a PSTN leased line permanent access . . . 111 SIST EN ISP 10613-3:1997
ISO/IEC ISP 10613-3: 1994(E) 0 ISO/IEC - Part 9: Definition of Profile RA51.1121, relaying the Connectionless-mode Network Service between CSMAICD LAN subnetworks and PSDNs using virtual calls over a digital data circuitlCSDN leased line permanent access - Part 10: Token Ring LAN subnetwork-dependent , media-dependent requirements - Part 11: Definition of Profile RA51.53, relaying the Connectionless-mode Network Service between CSMAICD LAN subnetworks and Token Ring LAN subnetworks - Part 12: Definition of Profile RA53.53, relaying the Connectionless-mode Network Service between Token Ring LAN subnetworks - Part 13: Definition of Profile RA53.54, relaying the Connectionless-mode Network Service between Token Ring LAN subnetworks and FDDI LAN subnetworks - Part 14: Definition of pro@le RA54.54, relaying the Connectionless-mode Network Service between FDDI LAN subnetworks - Part 15: Definition of Profile RA53.1111, relaying the Connectionless-mode Network Service between Token Ring LAN subnetworks and PSDNs using virtual calls over a PSTN leased line permanent access - Part 16: Definition of Profile RA53.1121, relaying the Connectionless-mode Network Service between Token Ring LAN subnetworks and PSDNs using virtual calls over a digital data circuitlCSDN leased line permanent access - Part 17: Definition of Profile RA54.1111, relaying the Connectionless-mode Network Service between FDDI LAN subnetworks and PSDNs using virtual calls over a PSTN leased line permanent access - Part 18: Dejinition of Profile RA54.1121, relaying the Connectionless-mode Network Service between FDDI LAN subnetworks and PSDNs using virtual calls over a digital data circuit/CSDN leased line permanent access Annexes A and B form an integral part of this part of ISO/IEC ISP 10613. Annex C is for information only. iv SIST EN ISP 10613-3:1997
0 ISO/IEC ISO/IEC ISP 10613-3: 1994(E) Introduction This International Standardized Profile (ISP) is defined in accordance with the principles specified by ISO/IEC Technical Report 10000. The context of Functional Standardization is one area in the Overall field of Information Technology (IT) standardization activities, covering base standards, profiles, and registration mechanisms. A Profile defines a combination of base Standards that collectively perform a specific well-defined IT function. Profiles standardize the use of Options and other variations in the base Standards, and provide a basis for the development of uniform, intemationally recognized System tests. ISPs arc produced not simply to ‘legitimize’ a particular choice of base Standards and Options, but to promote real System interoperability. One of the most important roles for an ISP is to serve as the basis for the development (by organizations other than ISO and IEC) of intemationally recognized tests. The development and widespread acceptance of tests based on this and other ISPs is crucial to the successful realization of this goal. ISO/IEC ISP 10613 consists of several parts of which this is part 3. ISO/IEC ISP 10613-1 specifies the Profile requirements that are subnetwork-independent. There are further parts which specify subnetwork-dependent and media-dependent requirements. In addition, for each individual Profile there is a part of ISO/IEC ISP 10613 which identifies the specific requirements of that Profile, making reference to appropriate material from part 1 and from the subnetwork dependent Parts of ISO/IEC ISP 10613. SIST EN ISP 10613-3:1997
ISO/IEC ISP 10613-3: 1994(E) 0 ISO/IEC blank page SIST EN ISP 10613-3:1997
INTERNATIONAL STANDARDIZED PROFILE OISO/IEC ISO/IEC ISP 10613=3:1994(E) Information technology - International Standardized Profile RA - Relaying the Connectionless-mode Network Service - Part 3: CSMA/CD LAN subnetwork-dependent, media-dependent requirements 1 Scope This International Standardized Profile is applicable to interworking units concemed with operating in the Open Systems Interconnection (OSI) environment. It specifies a combination of OS1 base Standards that collectively provide a Network Relay function for the connectionless-mode Network Service. This part of ISO/IEC ISP 10613 specifies media-dependent requirements which are applicable to an interworking unit attached to an ISO/IEC 8802-3 CSMA/CD LAN subnetwork. The Operation of an interworking unit may involve relaying from one subnetwork to another, and those subnetworks need not be of the same type. This part of ISO/IEC ISP 10613 applies only to communication over those subnetworks which are ISO/IEC 8802-3 CSMA/CD LANs. 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this International Standardized Profile. At the time of publication, the editions indicated were valid. All documents are subject to revision, and Parties to agreements based on this International Standardized Profile are wamed against automatically applying any more recent editions of the documents listed below, since the nature of references made by ISPs to such documents is that they may be specific to a particular edition. Members of IEC and ISO maintain registers of currently valid International Standards and ISPs, and CCITI’ maintains published editions of its current Recommendations. ISO 8473:1988, Information processing Systems - Data communications - Protocol for providing the Connectionless-mode Network Service. ISO 8473: 1988/Corr. 1: 1992, Information processing systems - Data communications - Protocol for providing the Connectionless-mode Network Service - Technical Corrigendum 1. NOTE - This Technical Corrigendum to ISO 8473 is to apply throughout in this part of ISO/IEC ISP 10613, wherever ISO 8473 itself is referenced. SIST EN ISP 10613-3:1997
ISO/IEC ISP 10613-3: 1994(E) 0 ISO/IEC ISO 8802-2: 1989, Information processing Systems - Local area networks - Part 2: Logical link control. ISO/IEC 8802-3: 1993, Information technology - Local and metropolitan area networks - Part 3: Carrier sense multiple access with collision detection (CSMAICD) access method and physical layer specifications. ISO 9542: 1988, Informationprocessing Systems - Telecommunications and information exchange between Systems - End System to Intermediate System routeing exchange protocol for use in conjunction with the Protocol for providing the connectionless-mode network Service (ISO 8473). ISO 9542: 1988/Corr. 1: 199 1, Information processing Systems - Telecommunications and information exchange between systems - End System to Interme
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.