EN ISO 18233:2006

Acoustics - Application of new measurement methods in building and room acoustics (ISO 18233:2006)

ISO 18233:2006 gives guidelines and specifies requirements for the application of new methods for the measurement of the acoustic properties of buildings and building elements. Guidelines and requirements for selection of the excitation signal, signal processing and environmental control are given, together with requirements for linearity and time-invariance for the systems to be tested.
ISO 18233:2006 is applicable to such measurements as airborne sound insulation between rooms and of façades, measurement of reverberation time and other acoustic parameters of rooms, measurement of sound absorption in a reverberation room, and measurement of vibration level differences and loss factor.
ISO 18233:2006 specifies methods to be used as substitutes for measurement methods specified in standards covering classical methods, such as ISO 140 (all parts), ISO 3382 (all parts) and ISO 17497-1.

Akustik - Anwendung neuer Messverfahren in der Bau- und Raumakustik (ISO 18233:2006)

Diese Internationale Norm enthält Leitfäden und legt Anforderungen an die Anwendung neuer Verfahren für die Messung von akustischen Eigenschaften von Gebäuden und Bauteilen fest. Sie enthält Leitfäden und Anforderungen an die Auswahl des Anregungssignals, die Signalverarbeitung und den Umweltschutz sowie Anforderungen an die Linearität und zeitliche Unveränderlichkeit der zu prüfenden Systeme.
Diese Internationale Norm gilt für Messungen wie z. B. die der Luftschalldämmung zwischen Räumen und von Fassaden, der Nachhallzeit und sonstiger akustischer Parameter von Räumen, der Schallabsorption in Nachhallräumen sowie von Schwingungspegelunterschieden und Verlustfaktoren.
Diese Internationale Norm legt Ersatzmessverfahren für die in Normen für klassische Messverfahren wie ISO 140 (alle Teile), ISO 3382 (alle Teile) und ISO 17497-1 festgelegten Messverfahren fest.

Acoustique - Application de nouvelles méthodes de mesure dans l'acoustique des bâtiments et des salles (ISO 18233:2006)

L'ISO 18233:2006 donne des recommandations et spécifie des exigences pour l'application de nouvelles méthodes de mesurage des propriétés acoustiques des bâtiments et des éléments de construction. Les recommandations et les exigences pour le choix du signal d'excitation, du traitement des signaux et du contrôle environnemental sont accompagnées des exigences de linéarité et d'invariance temporelle des systèmes à soumettre aux essais.
L'ISO 18233:2006 s'applique à des mesurages tels que l'isolation au bruit aérien entre salles adjacentes et celle des façades, le mesurage de la durée de réverbération et autres paramètres acoustiques des salles, le mesurage de l'absorption acoustique en salle réverbérante et le mesurage des écarts de niveau de vibration et du facteur de perte.
L'ISO 18233:2006 spécifie les méthodes de mesurage à utiliser en alternative à des méthodes de mesurage spécifiées dans les normes traitant des méthodes classiques, telles que l'ISO 140 (toutes les parties), l'ISO 3382 (toutes les parties) et l'ISO 17497-1.

Akustika – Uporaba novih merilnih metod na področju gradbene in prostorske akustike (ISO 18233:2006)

General Information

• Status: Published
• Publication Date: 31-May-2006
• Withdrawal Date: 30-Dec-2006
• ICS: 91.120.20 - Acoustics in building. Sound insulation
• Technical Committee: CEN/TC 126 - Acoustic properties of building products and of buildings
• Drafting Committee: CEN/TC 126/WG 1 - Methods for measuring the sound insulation of building elements and the acoustic performances of buildings
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Jun-2006
• Completion Date: 01-Jun-2006
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN ISO 18233:2006 - Acoustics - Application of new measurement methods in building and room acoustics (ISO 18233:2006)

Relations

• Revised: FprEN ISO 8233 - Thermoplastics valves - Torque - Test method (ISO/FDIS 8233:2021)
• Effective Date: 06-Nov-2019

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.URVWRUVNHAkustik - Anwendung neuer Messverfahren in der Bau- und Raumakustik (ISO 18233:2006)Acoustique - Application de nouvelles méthodes de mesure dans l'acoustique des bâtiments et des salles (ISO 18233:2006)Acoustics - Application of new measurement methods in building and room acoustics (ISO 18233:2006)91.120.20L]RODFLMDAcoustics in building. Sound insulation17.140.01Acoustic measurements and noise abatement in generalICS:Ta slovenski standard je istoveten z:EN ISO 18233:2006SIST EN ISO 18233:2006en01-julij-2006SIST EN ISO 18233:2006SLOVENSKI
STANDARD



SIST EN ISO 18233:2006



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 18233June 2006ICS 91.120.20 English VersionAcoustics - Application of new measurement methods in buildingand room acoustics (ISO 18233:2006)Acoustique - Application de nouvelles méthodes de mesuredans l'acoustique des bâtiments et des salles (ISO18233:2006)Akustik - Anwendung neuer Messverfahren in der Bau- undRaumakustik (ISO 18233:2006)This European Standard was approved by CEN on 19 May 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 18233:2006: ESIST EN ISO 18233:2006



EN ISO 18233:2006 (E)
2
Foreword
This document (EN ISO 18233:2006) has been prepared by Technical Committee ISO/TC 43 "Acoustics" in collaboration with Technical Committee CEN/TC 126 "Acoustic properties of building elements and of buildings", the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2006, and conflicting national standards shall be withdrawn at the latest by December 2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 18233:2006 has been approved by CEN as EN ISO 18233:2006 without any modifications.
SIST EN ISO 18233:2006



Reference numberISO 18233:2006(E)© ISO 2006
INTERNATIONAL STANDARD ISO18233First edition2006-06-01Acoustics — Application of new measurement methods in building and room acoustics Acoustique — Application de nouvelles méthodes de mesurage dans l'acoustique des bâtiments et des salles
SIST EN ISO 18233:2006



ISO 18233:2006(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2006 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfi
...