prEN 13616-1

Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device

This document contains requirements, test and assessment methods, marking, labelling and packaging applicable to overfill prevention devices with closure device. The devices are usually composed by:
-   sensor;
-   evaluation device;
-   closure device.
Overfill prevention devices intended to be used in/with underground and/or above ground, non-pressurized, static tanks designed for liquid fuels.
NOTE   Liquid fuel means liquids for internal combustion engines, heating/cooling boilers and generators.

Überfüllsicherungen für ortsfeste Tanks für flüssige Brenn- und Kraftstoffe - Teil 1: Überfüllsicherungen mit Schließeinrichtung

Dieses Dokument enthält Anforderungen, Prüf- und Bewertungsverfahren, Kennzeichnung, Etikettierung und Verpackung, die für Überfüllsicherungen mit Schließeinrichtung gelten. Die Überfüllsicherungen bestehen gewöhnlich aus:
-   Sensor;
-   Bewertungseinrichtung;
-   Schließeinrichtung.
Überfüllsicherungen sind für die Verwendung in/mit unter- und/oder oberirdischen, drucklosen, ortsfesten Tanks für flüssige Brenn- und Kraftstoffe vorgesehen.
ANMERKUNG   Flüssige Brenn- und Kraftstoffe bedeutet Flüssigkeiten für Verbrennungsmotoren, Heiz-/Kühlkessel und Generatoren.

Dispositifs limiteurs de remplissage pour réservoirs statiques pour carburants liquides - Partie 1 : Dispositifs limiteurs de remplissage avec dispositif de fermeture

Le présent document décrit les exigences, les méthodes d’essai et d’évaluation, le marquage, l’étiquetage et l’emballage applicables aux dispositifs limiteurs de remplissage avec dispositif de fermeture. Ces dispositifs sont généralement constitués :
-   d’un capteur ;
-   d’un dispositif d’évaluation ;
-   d’un dispositif de fermeture.
Les dispositifs limiteurs de remplissage sont destinés à être utilisés dans/avec des réservoirs statiques enterrés et/ou aériens, hors pression, conçus pour les carburants liquides.
NOTE   Le terme « carburants liquides » désigne les liquides utilisés pour les moteurs à combustion interne, les installations de chauffage/refroidissement et les générateurs.

Naprave za preprečitev prepolnitve za nepremične rezervoarje za tekoča goriva - 1. del: Naprave za preprečitev prepolnitve z zaporno napravo

General Information

• Status: Not Published
• Publication Date: 12-Aug-2025
• ICS: 23.020.10 - Stationary containers and tanks
• ICS: 75.200 - Petroleum products and natural gas handling equipment
• Technical Committee: CEN/TC 393 - Equipment for storage tanks and for service stations
• Drafting Committee: CEN/TC 393/WG 3 - Overfill prevention devices for static tanks for liquid petroleum fuels
• Current Stage: 4020 - Submission to enquiry - Enquiry
• Start Date: 23-May-2024
• Due Date: 27-Mar-2024
• Completion Date: 23-May-2024
• Directive: 2014/34/EU - Directive 2014/34/EU Of The European Parliament And Of The Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres (recast)
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/131 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on pipes, tanks and ancillaries, not in contact with water intended for human consumption
• Mandate: M/BC/CEN/92/46 - Standardization mandate assigned to CEN/CENELEC concerning equipment and protective systems intended for use in potentially explosive atmospheres
• Ref Project: oSIST prEN 13616-1:2024 - Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device

Relations

• Revises: EN 13616-1:2016 - Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13616-1:2024
01-julij-2024
Naprave za preprečitev prepolnitve za nepremične rezervoarje za tekoča goriva - 1.
del: Naprave za preprečitev prepolnitve z zaporno napravo
Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention
devices with closure device
Überfüllsicherungen für ortsfeste Tanks für flüssige Brenn- und Kraftstoffe - Teil 1:
Überfüllsicherungen mit Schließeinrichtung
Dispositifs limiteurs de remplissage pour réservoirs statiques pour carburants liquides -
Partie 1 : Dispositifs limiteurs de remplissage avec dispositif de fermeture
Ta slovenski standard je istoveten z: prEN 13616-1
ICS:
23.020.10 Nepremične posode in Stationary containers and
rezervoarji tanks
75.200 Oprema za skladiščenje Petroleum products and
nafte, naftnih proizvodov in natural gas handling
zemeljskega plina equipment
oSIST prEN 13616-1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13616-1:2024

---------------------- Page: 2 ----------------------
oSIST prEN 13616-1:2024


DRAFT
EUROPEAN STANDARD
prEN 13616-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

May 2024
ICS 23.020.10 Will supersede EN 13616-1:2016
English Version

Overfill prevention devices for static tanks for liquid fuels -
Part 1: Overfill prevention devices with closure device
Dispositifs limiteurs de remplissage pour réservoirs Überfüllsicherungen für ortsfeste Tanks für flüssige
statiques pour carburants liquides - Partie 1 : Brenn- und Kraftstoffe - Teil 1: Überfüllsicherungen
Dispositifs limiteurs de remplissage avec dispositif de mit Schließeinrichtung
fermeture
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 393.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13616-1:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13616-1:2024
prEN 13616-1:2024 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 5
4.1 General. 5
4.2 Effectiveness . 6
4.3 Construction .
...