EN ISO 18473-3:2019
(Main)Functional pigments and extenders for special application - Part 3: Fumed silica for silicone rubber application (ISO 18473-3:2018)
Functional pigments and extenders for special application - Part 3: Fumed silica for silicone rubber application (ISO 18473-3:2018)
ISO 18473-3:2018 specifies requirements and corresponding methods of test for fumed silica in powder form for silicone rubber application. This document is applicable to untreated and surface treated fumed silica.
Funktionelle Pigmente und Füllstoffe für besondere Anwendungen - Teil 3: Pyrogene Kieselsäure für Silikonkautschuk (ISO 18473-3:2018)
Dieses Dokument legt Anforderungen an und entsprechende Verfahren für die Prüfung von pulverförmiger pyrogener Kieselsäure für Silikonkautschuk fest. Dieses Dokument ist für unbehandelte und oberflächen-behandelte pyrogene Kieselsäure anwendbar.
Pigments et matières de charges fonctionnels pour applications spéciales - Partie 3: Silice fumée pour caoutchouc silicone (ISO 18473-3:2018)
Le présent document spécifie les exigences et les méthodes d'essai correspondantes applicables à la silice pyrogénée en poudre pour le caoutchouc silicone. Il est applicable à la silice pyrogénée traitée en surface et non traitée.
Funkcionalni pigmenti in polnila za posebno uporabo - 3. del: Pirogeni silicijev dioksid (kremenčev dim) za silikonsko gumo (ISO 18473-3:2018)
Standard ISO 18473-3:2018 določa zahteve in ustrezne metode preskušanja za pirogeni silicijev dioksid (kremenčev dim) za silikonsko gumo. Ta dokument se uporablja za neobdelani in površinsko obdelani pirogeni silicijev dioksid.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 18473-3:2019
01-september-2019
Funkcionalni pigmenti in polnila za posebno uporabo - 3. del: Pirogeni silicijev
dioksid (kremenčev dim) za silikonsko gumo (ISO 18473-3:2018)
Functional pigments and extenders for special application - Part 3: Fumed silica for
silicone rubber application (ISO 18473-3:2018)
Funktionelle Pigmente und Füllstoffe für besondere Anwendungen - Teil 3: Pyrogene
Kieselsäure für Siliconkautschuk (ISO 18473-3:2018)
Pigments et matières de charges fonctionnels pour applications spéciales - Partie 3:
Silice fumée pour caoutchouc silicone (ISO 18473-3:2018)
Ta slovenski standard je istoveten z: EN ISO 18473-3:2019
ICS:
87.060.10 Pigmenti in polnila Pigments and extenders
SIST EN ISO 18473-3:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 18473-3:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 18473-3:2019
EN ISO 18473-3
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2019
EUROPÄISCHE NORM
ICS 87.060.10
English Version
Functional pigments and extenders for special application
- Part 3: Fumed silica for silicone rubber application (ISO
18473-3:2018)
Pigments et matières de charges fonctionnels pour Funktionelle Pigmente und Füllstoffe für besondere
applications spéciales - Partie 3: Silice fumée pour Anwendungen - Teil 3: Pyrogene Kieselsäure für
caoutchouc silicone (ISO 18473-3:2018) Siliconkautschuk (ISO 18473-3:2018)
This European Standard was approved by CEN on 19 May 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18473-3:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 18473-3:2019
EN ISO 18473-3:2019 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 18473-3:2019
EN ISO 18473-3:2019 (E)
European foreword
The text of ISO 18473-3:2018 has been prepared by Technical Committee ISO/TC 256 "Pigments,
dyestuffs and extenders” of the International Organization for Standardization (ISO) and has been taken
over as EN ISO 18473-3:2019 by Technical Committee CEN/TC 298 “Pigments and extenders” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2019, and conflicting national standards
shall be withdrawn at the latest by December 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 18473-3:2018 has been approved by CEN as EN ISO 18473-3:2019 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.