EN ISO 277:2010
(Main)Binders for paints and varnishes - Raw tung oil - Requirements and methods of test (ISO 277:2002)
Binders for paints and varnishes - Raw tung oil - Requirements and methods of test (ISO 277:2002)
ISO 277:2002 specifies the requirements and the corresponding methods of test for two types of raw tung oil suitable for paints and varnishes. It is not intended to apply to tung oils which are wholly or partly solidified as a result of polymerization.
Bindemittel für Beschichtungsstoffe - Rohes Holzöl - Anforderungen und Prüfverfahren (ISO 277:2002)
Diese Internationale Norm legt die Anforderungen und die entsprechenden Prüfverfahren für zwei Arten von rohem Holzöl für Beschichtungsstoffe fest. Sie gilt nicht für Holzöle, die ganz oder teilweise durch Polymerisation eingedickt sind.
Liants pour peintures et vernis - Huiles de bois de Chine brutes - Exigences et méthodes d'essai (ISO 277:2002)
L'ISO 277:2002 spécifie les exigences et les méthodes d'essai correspondantes de deux types d'huile de bois de Chine brute pour peintures et vernis. Elle n'est pas destinée aux huiles de bois de Chine brutes qui ont été solidifiées entièrement ou partiellement par polymérisation.
Veziva za barve in lake - Surovo tungovo olje - Zahteve in preskusne metode (ISO 277:2002)
Ta mednarodni standard določa zahteve in ustrezne preskusne metode za dve vrsti polimeriziranega surovega tungovega olja, primernega za barve in lake. Ne velja za tungova olja, ki so zaradi polimerizacije v celoti ali delno strjena.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2012
Veziva za barve in lake - Surovo tungovo olje - Zahteve in preskusne metode (ISO
277:2002)
Binders for paints and varnishes - Raw tung oil - Requirements and methods of test (ISO
277:2002)
Bindemittel für Beschichtungsstoffe - Rohes Holzöl - Anforderungen und Prüfverfahren
(ISO 277:2002)
Liants pour peintures et vernis - Huiles de bois de Chine brutes - Exigences et méthodes
d'essai (ISO 277:2002)
Ta slovenski standard je istoveten z: EN ISO 277:2010
ICS:
87.060.20 Veziva Binders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 277
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2010
ICS 87.060.20
English Version
Binders for paints and varnishes - Raw tung oil - Requirements
and methods of test (ISO 277:2002)
Liants pour peintures et vernis - Huiles de bois de Chine Bindemittel für Beschichtungsstoffe - Rohes Holzöl -
brutes - Exigences et méthodes d'essai (ISO 277:2002) Anforderungen und Prüfverfahren (ISO 277:2002)
This European Standard was approved by CEN on 16 October 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 277:2010: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
The text of ISO 277:2002 has been prepared by Technical Committee ISO/TC 35 “Paints and varnishes” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 277:2010 by
Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2011, and conflicting national standards shall be withdrawn at the
latest by May 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 277:2002 has been approved by CEN as a EN ISO 277:2010 without any modification.
INTERNATIONAL ISO
STANDARD 277
Second edition
2002-07-01
Binders for paints and varnishes — Raw
tung oil — Requirements and methods of
test
Liants pour peintures et vernis — Huiles de bois de Chine brutes —
Exigences et méthodes d'essai
Reference number
ISO 277:2002(E)
©
ISO 2002
ISO 277:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2002 – All rights reserved
ISO 277:2002(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted
by the technical committees are circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 277 was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 10, Test
methods for binders for paints and varnishes.
This second edition cancels and replaces the first edition (ISO 277:1983), which has been technically revised. The
major changes are that the determinations of odour and mineral-acid content have been deleted. Determination of
the iodine number, assessment of sediment and clarity, and gas-chromatographic determination of the fatty-acid
composition have been introduced, together with a table giving typical values of the contents of the fatty acids in
raw tung oil. In addition, some of the requirements have been changed.
INTE
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.