EN ISO 14920:2015
(Main)Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015)
Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015)
ISO 14920:2015 defines the procedure for thermal spraying of self-fluxing alloys that are simultaneously or subsequently fused to create a homogeneous, diffusion bonded coating.
Thermisches Spritzen - Spritzen und Einschmelzen von selbstfließenden Legierungen (ISO 14920:2015)
Diese Internationale Norm gilt für thermisches Spritzen von selbstfließenden Legierungen, die gleichzeitig oder anschließend eingeschmolzen werden, um eine homogene diffusionsgebundene Schicht zu schaffen.
Projection thermique - Projection et fusion d'alliages autofondants (ISO 14920:2015)
L'ISO 14920:2015 spécifie la méthode de projection thermique d'alliages autofondants, dont la fusion s'opère simultanément ou ultérieurement pour donner un revêtement homogène où les produits s'agglomèrent par diffusion.
Vroče brizganje (metalizacija) - Taljenje in brizganje - Vroče nanašanje samotaljivih zlitin (ISO 14920:2015)
Dokument zajema vroče brizganje samotaljivih zlitin, ki so spojene sočasno ali naknadno, da nastane homogen difuzijsko vezan premaz.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2015
1DGRPHãþD
SIST EN ISO 14920:1999
9URþHEUL]JDQMHPHWDOL]DFLMD7DOMHQMHLQEUL]JDQMH9URþHQDQDãDQMHVDPRWDOMLYLK
]OLWLQ,62
Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015)
Thermisches Spritzen - Spritzen und Einschmelzen thermisch gespritzter Schichten von
selbstfließenden Legierungen (ISO 14920:2015)
Projection thermique - Projection et fusion des revêtements obtenus par projection
thermique des alliages autofondants (ISO 14920:2015)
Ta slovenski standard je istoveten z: EN ISO 14920:2015
ICS:
25.220.20 Površinska obdelava Surface treatment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 14920
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2015
ICS 25.220.20 Supersedes EN ISO 14920:1999
English Version
Thermal spraying - Spraying and fusing of self-fluxing alloys
(ISO 14920:2015)
Projection thermique - Projection et fusion d'alliages Thermisches Spritzen - Spritzen und Einschmelzen von
autofondants (ISO 14920:2015) selbstfließenden Legierungen (ISO 14920:2015)
This European Standard was approved by CEN on 18 October 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14920:2015 E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 14920:2015) has been prepared by Technical Committee CEN/TC 240 “Thermal
spraying and thermally sprayed coatings” the secretariat of which is held by DIN, in collaboration with
Technical Committee ISO/TC 107 "Metallic and other inorganic coatings".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by July 2015, and conflicting national standards shall be withdrawn at the
latest by July 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14920:1999.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14920:2015 has been approved by CEN as EN ISO 14920:2015 without any modification.
INTERNATIONAL ISO
STANDARD 14920
Second edition
2015-01-15
Thermal spraying — Spraying and
fusing of self-fluxing alloys
Projection thermique — Projection et fusion d’alliages autofondants
Reference number
ISO 14920:2015(E)
©
ISO 2015
ISO 14920:2015(E)
© ISO 2015
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2015 – All rights reserved
ISO 14920:2015(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Influence on the substrate and design . 1
3.1 Substrate metal . 1
3.2 Design . 1
4 Spray material of the self-fluxing alloy . 2
4.1 Selection. 2
4.2 Composition . 2
5 Preparation of the component . 2
5.1 General . 2
5.2 Methods of surface preparation . 3
5.3 Cleanliness . 3
6 Spray and fusion process . 3
6.1 Spraying with simultaneous fusion . 3
6.1.1 Procedure . 3
6.1.2 Particle size and particle size range of the powder particles . 3
6.1.3 Coating thickness . 3
6.2 Spraying with subsequent fusion . 4
6.2.1 Procedure . 4
6.2.2 Particle size and particle size range of the powder particles . 4
6.2.3 Coating thickness . 4
6.3 Spraying technique — Procedure . 4
6.3.1 General. 4
6.3.2 Preheating . 4
6.3.3 Spraying . 4
6.3.4 Fusing the deposit. 5
6.3.5 Cooling . 5
7 Final machining . 5
8 Hardness testing . 5
8.1 General . 5
8.2 Standard hardness test . 6
Annex A (informative) Reference values for the expected hardness of the fused coating .7
Bibliography . 8
ISO 14920:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT), see the following URL: Foreword - Supplementary information
ISO 14920 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 240, Thermal spraying and thermally sprayed coatings, in collaboration with Technical Committee
ISO/TC 107, Metallic and other inorg
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.