EN ISO 14284:2002

Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)

Gives methods for the determination of the chemical composition of pig iron, cast iron and steel. Methods are specified for use with both liquid and solid metal. Replaces ISO 377-2:1989.

Eisen und Stahl - Entnahme und Vorbereitung von Proben für die Bestimmung der chemischen Zusammensetzung (ISO 14284:1996)

Diese Internationale Norm legt Verfahren für die Entnahme und Vorbereitung von Proben zur Bestimmung der chemischen Zusammensetzung von Roheisen, Gusseisen und Stahl fest. Es werden Verfahren zur Anwendung für Eisenwerkstoffe sowohl im flüssigen als auch im festen Zustand festgelegt.

Fontes et aciers - Prélèvement et préparation des échantillons pour la détermination de la composition chimique (ISO 14284:1996)

Jeklo in železo - Vzorčenje in priprava vzorcev za ugotavljanje kemijske sestave (ISO 14284:1996)

General Information

• Status: Withdrawn
• Publication Date: 24-Sep-2002
• Withdrawal Date: 15-Nov-2022
• ICS: 77.040.30 - Chemical analysis of metals
• Technical Committee: ECISS/TC 102 - Methods of chemical analysis for iron and steel
• Drafting Committee: ECISS/TC 102/WG 5 - Chemical analysis of ferro alloys
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 16-Nov-2022
• Ref Project: SIST EN ISO 14284:2003 - Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)

Relations

• Replaced By: EN ISO 14284:2022 - Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:2022)
• Effective Date: 23-Nov-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14284:2003
01-april-2003
-HNORLQåHOH]R9]RUþHQMHLQSULSUDYDY]RUFHY]DXJRWDYOMDQMHNHPLMVNHVHVWDYH
,62
Steel and iron - Sampling and preparation of samples for the determination of chemical
composition (ISO 14284:1996)
Eisen und Stahl - Entnahme und Vorbereitung von Proben für die Bestimmung der
chemischen Zusammensetzung (ISO 14284:1996)
Fontes et aciers - Prélevement et préparation des échantillons pour la détermination de
la composition chimique (ISO 14284:1996)
Ta slovenski standard je istoveten z: EN ISO 14284:2002
ICS:
77.080.01 Železne kovine na splošno Ferrous metals in general
SIST EN ISO 14284:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14284:2003

---------------------- Page: 2 ----------------------

SIST EN ISO 14284:2003
EUROPEAN STANDARD
EN ISO 14284
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2002
ICS 77.080
English version
Steel and iron - Sampling and preparation of samples for the
determination of chemical composition (ISO 14284:1996)
Fontes et aciers - Prélèvement et préparation des Eisen und Stahl - Entnahme und Vorbereitung von Proben
échantillons pour la détermination de la composition für die Bestimmung der chemischen Zusammensetzung
chimique (ISO 14284:1996) (ISO 14284:1996)
This European Standard was approved by CEN on 21 July 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14284:2002 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 14284:2003
EN ISO 14284:2002 (E)
CORRECTED 2002-11-13
Foreword
The text of ISO 14284:1996 has been prepared by Technical Committee ISO/TC 17 "Steel" of
the International Organization for Standardization (ISO) and has been taken over as EN ISO
14284:2002 by Technical Committee ECISS/TC 20 "Methods of chemical analysis of ferrous
products", the secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by March 2003, and conflicting national
standards shall be withdrawn at the latest by March 2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the
United Kingdom.
Endorsement notice
The text of ISO 14284:1996 has been approved by CEN as EN ISO 14284:2002 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
2

---------------------- Page: 4 ----------------------

SIST EN ISO 14284:2003
EN ISO 14284:2002 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions
of any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications,
indicated by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 377 1997 Steel and steel products - Location EN ISO 377 1997
and preparation of samples and
test pieces for mechanical testing
3

---------------------- Page
...