EN 10217-7:2014

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes

This Part of EN 10217 specifies the technical delivery conditions in two test categories for welded tubes of circular cross-section made of austenitic and austenitic-ferritic stainless steel which are intended for pressure and corrosion resisting purposes at room temperature, at low temperatures or at elevated temperatures.
NOTE   Once this standard is published in the Official Journal of the European Union (OJEU) under Directive 97/23/EC, pressure equipment directive, presumption of conformity to the Essential Safety Requirements (ESR) of Directive 97/23/EC is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive are satisfied, needs to be done by the designer or manufacturer of the pressure equipment, taking also into account the subsequent manufacturing processes which may affect properties of the base materials.

Geschweißte Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen - Teil 7: Rohre aus nichtrostenden Stählen

Dieser Teil der EN 10217 legt die technischen Lieferbedingungen für geschweißte Rohre mit kreisförmigem Querschnitt aus austenitischen und aus austenitisch-ferritischen Stählen, die für Druckbeanspruchungen und für korrosive Medien bei Raumtemperatur, bei tiefen Temperaturen und bei erhöhten Temperaturen bestimmt sind, in zwei Prüfkategorien fest.

Tubes soudés en acier pour service sous pression - Conditions techniques - Partie 7 : Tubes en aciers inoxydables

La présente partie de l’EN 10217 spécifie les conditions techniques de livraison, pour deux catégories d'essai, des tubes sans soudure à section circulaire fabriqués en acier austénitique et en acier inoxydable austéno-ferritique utilisés dans les applications nécessitant une résistance à la pression et à la corrosion à température ambiante, à basse température ou à température élevée.
NOTE   Dès lors que la présente Norme européenne est publiée dans le Journal Officiel de l’Union européenne (JOUE) en lien avec la Directive 97/23/CE, la présomption de conformité avec les exigences essentielles de sécurité de la Directive 97/23/CE se limite aux données techniques des matériaux spécifiées dans la présente Norme européenne et ne suppose pas l’adéquation des matériaux avec un appareil en particulier. Par conséquent, il doit être procédé à l’évaluation des données techniques spécifiées dans la présente norme de matériaux par rapport aux exigences concernant la conception de cet équipement spécifique, afin de vérifier que les exigences essentielles de sécurité de la Directive 97/23/CE soient satisfaites.

Varjene jeklene cevi za tlačne posode - Tehnični dobavni pogoji - 7. del: Cevi iz nerjavnega jekla

Ta del standarda EN 10217 določa tehnične dobavne pogoje v dveh preskusnih kategorijah za varjene cevi s krožnim prerezom iz avstenitnega in avstenitno-feritnega nerjavnega jekla, namenjene za primere rabe, kjer je potrebna odpornost proti tlaku in koroziji na sobni temperaturi, nizkih ali povišanih temperaturah.

General Information

• Status: Withdrawn
• Publication Date: 28-Oct-2014
• Withdrawal Date: 20-Apr-2021
• ICS: 23.040.10 - Iron and steel pipes
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: ECISS/TC 110 - Steel tubes, and iron and steel fittings
• Drafting Committee: ECISS/TC 29/SC 1 - Tubes for pressure purposes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 21-Apr-2021
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 10217-7:2015 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes

Relations

• Replaces: EN 10217-7:2005 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
• Effective Date: 08-Jun-2022
• Replaced By: EN 10217-7:2021 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
• Effective Date: 02-Mar-2016

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geschweißte Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen - Teil 7: Rohre aus+ nichtrostenden StählenTubes soudés en acier pour service sous pression - Conditions techniques de livraison - Partie 7: Tubes en aciers inoxydablesWelded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific use23.020.30MHNOHQNHPressure vessels, gas cylindersICS:Ta slovenski standard je istoveten z:EN 10217-7:2014SIST EN 10217-7:2015en,de01-januar-2015SIST EN 10217-7:2015SLOVENSKI
STANDARDSIST EN 10217-7:20051DGRPHãþD



SIST EN 10217-7:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10217-7
October 2014 ICS 23.040.10; 77.140.75 Supersedes EN 10217-7:2005English Version
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
Tubes soudés en acier pour service sous pression - Conditions techniques de livraison - Partie 7: Tubes en aciers inoxydables
Geschweißte Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen - Teil 7: Rohre aus nichtrostenden Stählen This European Standard was approved by CEN on 6 September 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10217-7:2014 ESIST EN 10217-7:2015



EN 10217-7:2014 (E) 2 2 Contents Foreword . 4 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 6 4 Symbols . 7 5 Classification and designation . 7 5.1 Classification . 7 5.2 Designation . 7 6 Information to be supplied by the purchaser . 7 6.1 Mandatory information . 7 6.2 Options . 7 6.3 Examples of an order . 9 7 Manufacturing process . 9 7.1 Steelmaking process .
...